elipson Stream S300 Xi Hi Res Audio Streamer User Manual
- June 10, 2024
- elipson
Table of Contents
elipson Stream S300 Xi Hi Res Audio Streamer
WARNING
MAKE SURE TO READ THIS INSTRUCTION MANUAL BEFORE TURNING THE POWER ON OR
HOOKING UP THIS DEVICE.
DESCRIPTION
Elipson S300 Xi network streamer is a perfect solution for connecting your basic audio setup to your home network. It works with any integrated amplifier, preamplifier or powered speaker by connecting directly to a line or optical Toslink input, taking advantage of the digital-to-analogue conversion of your current device.
Its wireless (Wi-Fi and Bluetooth) and wired (Ethernet) connection options provide instant access to millions of music tracks in high definition.
As part of our Elipson Multiroom product range, the streamer S300Xi is equipped with the latest Google Cast & AirPlay2 technologies, allowing you to control your music from anywhere in your home.
Browse and play your audio files from streaming services or your own music library using your WiFi network and your Elipson Multiroom smartphone app. If you don’t have WiFi, you can connect via Bluetooth or wired
Now it’s your turn to enjoy the Elipson experience.
SPECIFICATIONS
Streaming Service & network protocols| AirPlay 2 Amazon Music Deezer Qobuz
Spotify Spotify Connect Tidal Tidal Connect Web radios
---|---
Inputs| Bluetooth 5.2 Aux (mini jack 3.5) RJ45 Wi-F
Outputs| Optical (mini jack 3.5) Aux (mini jack 3.5)
DAC| ESS SABRE ES9028
Signal-to-noise ratio| 110 dB
Wi-Fi network| EEE 802.11 a/b/g/n/ac 2.4GHz
EEE 8702.11 a/n/ac 5GHz
Ethernet port| Yes (front and rear panel) switchable
Power supply| 5V 1A – USB C
Dimensions| L78,5 x W83,2 x H15,3 mm
Net weight| 80 g
GENERAL INFORMATION
INSIDE THE BOX :
-
Stream S300 Xi device
-
Power cable USB C 5V (1 m)
-
3.5 mini-jack stereo cable (1.5m)
FRONT PANEL
1- Led power (ON : white / Stand by : red – low consumption)
2- Bluetooth pairing button
3- Reset button
4- Ethernet port (switchable from the back)
5- Led for network mode (flashing white : in process / solid white :
connected)
6- Led for Bluetooth mode (flashing white : in process / solid white :
connected)
7- Led for AUX input
REAR PANEL
1- Ethernet port (switchable from the back)
2- Switch to select front or back ethernet port
3- Toslink optical mini-jack 3.5 output (digital)
4- USB-C main plug 5V 1A
5- Analog mini-jack 3.5 output
6- Analog mini-jack 3.5 input
APPLICATION
The Elipson App allows you to connect your product to the network thanks to your smartphone or tablet and to use several devices of our brand simultaneously. The App is compatible with an iOS and android phone and can be downloaded for free from the google Play Store and the Mac App Store.
The application will allow you to :
- Connect to over 15,000 digital radios
- Play music from a streamer (Deezer, Spotify, tidal…)
- Select a source on your product
- Manage multi-room mode
- Knowing what music you’re playing
- Manage the sound volume
- Simultaneously add and control other Elipson products
Use your phone, tablet or computer as a remote control for Spotify.
Go to spotify.com/connect to learn how.
The Spotify Software is subject to third party licenses found here:
https://www.spotify.com/connect/third-party-licenses.
USING THE STREAM S300 Xi
After connecting the streamer to your amplifier, plug in the power supply.
Depending on your system, you can either use the optical output on an external
DAC or connect the analogue output to an amplifier (line or AUXinput).
WI-FI CONNECTION :
In order to successfully connect your Elipson Stream S300 Xi to your home
network follow the detailed instructions in our Elipson Multiroom application.
Do not hesitate to refer to the tutorials on our website if you encounter any
difficulties during the process.
RESETTING PARAMETERS :
Press and hold the “RESET” button on the front of the unit until the “Power”, “LAN”, “BT”, “AUX”, LEDs flash simultaneously. Once the restoration is complete, the unit will automatically start the Wi-Fi network connection procedure.
IN CASE OF BREAKDOWN
DO NOT USE ANY KIND OF CLEANING SOLUTION OR CLEANER ON THESE UNITS.
IF FOR SOME REASON THE DEVICE NEEDS TO BE REPAIRED, PLEASE CONTACT US
IMMEDIATELY. WE WILL ISSUE A RETURN AUTHORIZATION NUMBER. THIS UNIT SHOULD NOT
BE SHIPPED BACK TO ELIPSON WITHOUT THE RA#.
DO NOT ATTEMPT TO OPEN OR DISMANTLE THIS DEVICE.
THIS WILL VOID THE WARRANTY !
POSSIBLE BREAKDOWN
The product connects and disconnects from the Wi-Fi network.
- Check that the broadband of your Wi-Fi network is sufficient.
- Check that the device is not too far from the router
- Prefer the ethernet connection via an RJ45 cable
No sound on a channel:
- Check the connection to the amplifier
2.4G & 5G DÉCLARATION / STATEMENTS
RF Exposure Information: To maintain compliance with FCC RF exposure
requirements, use the product that maintain a 20cm separation distance between
the user’s body and the host. MPE (Maximum Permissible Exposure) limit for RF
exposure at prediction frequency and satisfy RF exposure compliance.
FCC STATEMENT:
-
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. -
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
IC WARNING :
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that
may cause undesired operation of the device.
FCC/ IC Radiation Exposure Statemen
IC WARNING :
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that
may cause undesired operation of the device.
FCC/ IC Radiation Exposure Statemen
CE & UKCA STATEMENT:
RF exposure information: The Maximum Permissible Exposure (MPE) level has been
calculated based on a distance of d=20 cm between the device and the human
body. To maintain compliance with RF exposure requirement, use product that
maintain a 20cm distance between the device and human body.
Do not use the device in the environment at too high or too low temperature,
never expose the device under strong sunshine or too wet environment. The
suitable temperature for the product and accessories is 0°C-40°C.
Operating frequency range and maximum transmit power
- Bluetooth: 2402MHz ~ 2480MHz, <9.11 dBm EIRP
- LAN 2.4GHz: 2412MHz ~ 2472MHz, <20 dBm EIRP
- WLAN 5GHz: 5150MHz ~ 5825MHz, <20 dBm EIRP
The device for operation in the band 5150~5350 MHz is only for indoor use to
reduce the potential for harmful interference to co-channel mobile satellite
systems.
This product can be used across EU member states & UK.
Hereby, Elipson using Linkplay Technology Inc. Corporation, declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU
CAUTION
The WEEE symbol indicates this ELIPSON
product complies with the European Parliament and Council Directive 2012/19/EU
concerning Waste Electrical and Electronic Equipment (WEEE). This product must
be appropriately recycled or processed in accordance with these directives.
Consult your local waste disposal authority for guidance.
WARRANTY
These device has a limited 2 year warranty. This warranty includes 2 year
parts and repair labor on all components.
The warranty extends only to the original purchaser of the product and not to
any subsequent owner.
Elipson’s obligation under these warranties is limited to repairing or
replacing any component found defective in material or workmanship under
normal conditions of use with an equal and/or current product.
These warranties shall not apply to products which have been abused, modified,
or disassembled.
Products to be repaired or returned under this warranty must be returned to
the factory through an authorized Elipson dealer with all transportation and
insurance charges prepaid.
TO CLAIM REPAIR UNDER WARRANTY
To claim repair or service under warranty you simply have to contact your
local Elipson dealer, from whom your equipment has been purchased. To ensure
that you will be able to ship your damaged product in correct manner, always
retain the original packaging of your Elipson equipment. If you cannot contact
your original dealer, or if you are using your Elipson product outside the
purchase country, you should contact Elipson national distributor in the
residence country, who will advise where the equipment can be serviced.
You can also visit our web site to check our contact information :
www.elipson.com
To validate your warranty, you need to produce, as a proof of purchase, your
original purchase invoice specifying the date of purchase and stamped by your
dealer. 
