elipson W35 Xi Well Orchestrated Connected Speaker User Manual

elipson W35 Xi Well Orchestrated Connected Speaker

Specifications

• Type: 2-way active sealed loudspeaker
• Drive units: Mid-Woofer: 2 x 6.5” High power handling with large magnet and large excursion
• Network: Multiroom Wi-Fi 2.4GHz / 5GHz IEEE 802.11 b/g/n Ethernet
• Audio Multiroom: Up to 10 rooms, depending on the quality of the network

Product Information
Elipson W35 Xi: With the W35 Xi, Elipson redefines the concept of the spherical speaker with a connected object delivering physical impact sound coupled with the amplitude of a true stereo configuration. Its wireless (Wi-Fi and Bluetooth) and wired (Ethernet) connection options provide instant access to millions of music tracks in high definition. As part of our Elipson Connect product range, the W35 Xi has Chromecast built-inTM and is compatible with AirPlay 2, so you can stream your favorite music room to room. Browse and play your audio files from streaming services or your own music library using your WiFi network and your Elipson Multiroom smartphone app. If you don’t have WiFi, you can connect via Bluetooth or wired. Now it’s your turn to enjoy the Elipson experience.

Bluetooth Mode

To pair the W35 Xi with a Bluetooth device:

1. Turn on the speaker and activate Bluetooth mode.
2. On your device, enable Bluetooth and search for available devices.
3. Select “W35 Xi” from the list of available devices to pair.

Wi-Fi Mode

To connect the W35 Xi to a Wi-Fi network:

1. Access the settings on the speaker and choose Wi-Fi mode.
2. Select your Wi-Fi network from the list of available networks.
3. Enter the Wi-Fi password if required to establish the connection.

Ethernet Connection

To connect the W35 Xi using an Ethernet cable:

1. Locate the Ethernet port on the speaker.
2. Connect one end of the Ethernet cable to the speaker and the other end to your router or network switch.
3. The speaker will automatically establish a wired connection.

Standby Mode

The W35 Xi enters standby mode after 20 minutes of inactivity.
The LED indicator will flash red when in standby mode.

Resetting the Speaker
If needed, you can reset the W35 Xi by following these steps:

1. Locate the reset button on the speaker.
2. Press and hold the reset button for 10 seconds until you see the indicator lights change.
3. The speaker will restart and reset to its default settings.

FAQ

Q: What should I do in case of a breakdown?
A: If you encounter any issues with your W35 Xi speaker, please visit our website at www.elipson.com for troubleshooting tips or contact us via email at [email protected] or through our social media channels on Facebook and Instagram.

Dear Customer,
Thank you for choosing Elipson W35 Xi.
Take time to read this manual carefully before installing your loudspeaker.
It contains all the safety and operating instructions that should be followed to optimize the performances of your loudspeaker. We highly recommend you to retain both packaging and user’s manual for future use.

WARNING
MAKE SURE TO READ THIS INSTRUCTION MANUAL BEFORE TURNING THE POWER ON OR HOOKING UP THIS PRODUCT.

DESCRIPTION

• With the W35 Xi, Elipson redefines the concept of the spherical speaker with a connected object delivering physical impact sound coupled with the amplitude of a true stereo configuration.
• Its wireless (Wi-Fi and Bluetooth) and wired (Ethernet) connection options provide instant access to millions of music tracks in high definition.
• As part of our Elipson Connect product range, the W35 Xi has Chromecast built-in™ and is compatible with AirPlay 2, so you can stream your favorite music room to room.
• Browse and play your audio files from streaming services or your own music library using your WiFi network and your Elipson Multiroom smartphone app. If you don’t have WiFi, you can connect via Bluetooth or wired.
• Now it’s your turn to enjoy the Elipson experience.

 SPECIFICATIONS

TECHNICAL
Type
2-way active sealed loudspeaker

Drive units

• Mid-Woofer: 2 x 6,5’’High power handling with large magnet and large excursion
• Tweeter: 2 x 1’’ high quality silk dome with heatsink in the back of magnet for better cooling
• Frequency response (± 3dB)
• 47 Hz – 22 kHz

Inputs

• Analog AUX In (3,5mm mini jack)
• Digital optical S/PDIF
• Ethernet RJ45
• Wi-Fi

Voltage
110 / 240V

Audio streaming

• MP3
• WMA
• WAV
• FLAC
• AIFF ALAC (Apple Lossless)
• AAC
• Up to : 24 bits / 192 kHz

GENERAL

Dimension

• : 350 mm diameter sphere

Finishes
Matt dark

Network
Multiroom Wi-Fi 2.4GHz / 5GHz
IEEE 802.11 b/g/n

Ethernet
Audio multiroom up to 10 rooms, depending on the quality of the network

Bluetooth
Bluetooth v5.0
Formats: EDR, BLE

Application
Elipson’s app supports up to 10 devices Supports Android/iOS system.
Elipson’s app includes Spotify, Qobuz, Tidal, Napster, Tunein etc.

Streaming Service & network protocols

• AirPlay 2
• Amazon Music
• Chromecast built-in

Deezer

• Qobuz
• Spotify

Spotify Connect

• Tidal
• Web radios

Weight

• 8 kg

Miscellaneous

• Acoustic fabric type grid
• Aluminium belt

GENERAL INFORMATIONS

IN THE BOX

1. W35 Xi loudspeaker
2. Power cable
3.  A stereo mini-jack 3.5 cable
4. Six rubber pads to stick underneith the W35 Xi
   Remove the tape and put the rubber pad if you put the W35 on a hard surface (Wood, metal, glass table…)

FRONT PANEL

1. Power switch and source selection

2. Pairing

3. Mute/unmute

4. Volume control

5. LED : – Solid red : turned off

   • Flashing red : standby
   • White : Network mode
   • Blue : Bluetooth mode
   • Green : Auxiliary mode
   • Yellow : Optical mode

6.  Reset

7. Auxiliary, analog jack 3.5mm input

8. Toslink, digital optical input

9. Ethernet, RJ45 cable input

10. Power supply (110 – 240V)

APPLICATION
The Elipson App allows you to connect your product to the network thanks to your smartphone or tablet and to use several devices of our brand simultaneously. The App is compatible with Apple and Android™ devices, available to download from the App Store and on Google Play.

The application will allow you to

• Connect to over 15,000 digital radios
• Play music from a streamer (DEEZER, SPOTIFY, TIDAL…)
• Select a source on your product
• Manage multi-room mode
• Knowing what music you’re playing
• Manage the sound volume
• Simultaneously add and control other Elipson products

To use AirPlay with W35 Xi, the latest version of iOS, iPadOS, or macOS is recommended.

Use your phone, tablet or computer as a remote control for Spotify. Go to spotify.com/connect to learn how.
The Spotify Software is subject to third party licenses found here: https://www.spotify.com/connect/third-party- licenses

USE OF THE W35 Xi LOUDSPEAKER

After connecting the W35 Xi and to your power supply.
press the “Power” button and select your source by pressing the same button.

BLUETOOTH MODE

• On the front panel of the loudspeaker, make sure that the blue LED for bluetooth mode is lit.
• If it does not flash, press the pairing button on the loudspeaker.
• When the LED flashes, go to the bluetooth settings of the device you want to connect and select “W35Xi_XXXX”.
• When the LED turns solid blue, you are connected to the device.

WI-FI MODE

• Switch your W35 Xi on by pressing the Power button on the loudspeaker. Select the Wi-Fi input by pressing the source button. (The mode is activated when the white LED light up.)
• Wait a few seconds for the network system to initialize until the LED flashes.
• Therefore, open your Elipson application and follow the on-screen instructions.
• If you have a problem, reset your system settings by pressing and holding the “Reset” button, then restart the procedure.

ETHERNET CONNECTION
Connect your device to the network via an RJ45 cable connected to the ethernet input. Turn on your W35 Xi then select the network input by pressing the power button on your speaker. The mode is activated when the LED lights up in the white color.
Your speaker is then automatically connected and available on your network.

RADIO PRESETS

• In the main menu of the Elipson application, click on TuneIn and find the radio station you want to save as a preset.
• Next to all the radio stations, you will see a loudspeaker icon on the right side of the screen.
• Click on the speaker icon to open the preset content.
• Then click on one of the presets 1 to 5 to save a radio station as a preset.

STAND-BY MODE
When you are not using the device, it automatically go into standby/low power mode after 20 minutes. This mode will result in a flashing.
To “wake up” the device, simply play music through the application.

RESET THE W35 Xi
Keep the “ reset “ button pressed with a point until the LED flashes alternately in red and in white. After 30 seconds, the LED will start flashing white again. Your speaker is reset.

TO GET A BETTER UNDERSTANDING OF THE LOUDSPEAKER’S FUNCTIONALITY AND OUR APPLICATION, WE INVITE YOU TO WATCH OUR TUTORIAL VIDEOS, AVAILABLE ON OUR YOUTUBE ACCOUNT: ELIPSONOFFICIAL

IN CASE OF BREAKDOWN

DO NOT USE ANY KIND OF CLEANING SOLUTION OR CLEANSER ON THESE UNITS. IF FOR SOME REASON THE DEVICE NEEDS TO BE REPAIRED, PLEASE CONTACT US IMMEDIATELY. WE WILL ISSUE A RETURN AUTHORIZATION NUMBER. THIS UNIT SHOULD NOT BE SHIPPED BACK TO ELIPSON WITHOUT THE RA#.
DO NOT ATTEMPT TO OPEN OR DISMANTLE THIS DEVICE.
THIS WILL VOID THE WARRANTY !

POSSIBLE BREAKDOWNS

Very low signal or no sound at all:

• Volume is at minimum level
• You have activated the wrong source
• The device is muted

Product dropping in and out of Wi-Fi:

• Check that the speed of your wifi network is good.
• The product is too far from the router

Bluetooth connection is not stable

• The source is too far from the device
• Bad Bluetooth signal from the source

Output distortion

• The voltage of the auxiliary source you are using exceeds 1.5V.
• Source level is too high

APPLE AIRPLAY LEGAL STATEMENT

APPLE AIRPLAY LEGAL NOTICE:
Use of the Works with Apple AirPlay badge means that an accessory has been designed to work specifically with the technology identified in the badge and has been certified by the developer to meet Apple performance standards.

LINES AND TRADEMARK SYMBOLS
Apple, AirPlay, Apple Home, Apple TV, Apple Watch, HomeKit, HomePod, HomePod mini, iPad, iPad Air, iPhone, and tvOS are trademarks of Apple Inc., registered in the U.S. and other countries and regions.

CREDIT LINES AND TRADEMARK SYMBOLS (JAPAN)
Apple, AirPlay, Apple Home, Apple TV, Apple Watch, HomeKit, HomePod, HomePod mini, iPad, iPad Air, iPhone, and tvOS are trademarks of Apple Inc., registered in the U.S. and other countries and regions. The trademark “iPhone” is used in Japan with a license from Aiphone K.K.

CREDIT LINES AND TRADEMARK SYMBOLS (UNITED STATES)

• AirPlay®
• Apple®
• Apple Home™
• Apple TV®
• Apple Watch®
• HomeKit®
• HomePod®
• HomePod mini®
• iPad®
• iPad Air®
• iPad mini®
• iPad Pro®
• iPhone®
• Lightning®
• Mac®
• Siri®

GOO GLE LEGAL NOTICE:
Android, Google Play, YouTube and Chromecast built-in are trademarks of Google LLC.

WARNING
TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. THIS APPLIANCE SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING WATER AND THAT NO OBJECT FILLIED WITH LIQUIDS SUCH AS VASES SHALL BE PLACED ON APPARATUS.

Precautions for proper use

This product was designed according to rigorous norms and complies with safety standards. It should only be used under normal conditions as described below. Verify the electrical voltage before connecting it to a power source. This device was designed to work in numerous countries. We advise you to hook it up completely before connecting it to the AC power source. Take care when unplugging the power cord. When you unplug the power cord from the power source, do so by pulling on the head of the plug rather than on the cable. If you do not expect to use this device for a prolonged period of time, you are advised to unplug it from the power source. Do not open the case. This device contains no parts that can be exchanged by the user. Accessing the inside of this device’s case can lead to electric shock. Any modification to the product will nullify the guarantee. If a foreign object or liquid falls into the case, contact your retailer to arrange for a technician to remove it from the device safely.

IMPORTANT SAFETY INSTRUCTION

Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and / or fire. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of your Sound Bar, please read the following precautions carefully before using the product.

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water. 6. Clean only with dry cloth.
6. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
8. The battery shall not be exposed to excessive heat such as sunshine, fire or the like
9. Do not defeat the safety purpose of the polarized or grounding-type plug. Apolarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade and the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightening storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. The mains plug or an appliance coupler is used as a disconnect device, the disconnecting device shall remain ready operable.

WARRANTY

• These loudspeakers have a limited 2 year warranty. This warranty includes 2 year parts and repair labor on all components. The warranty extends only to the original purchaser of the product and not to any subsequent owner.
• Elipson’s obligation under these warranties is limited to repairing or replacing any component found defective in material or workmanship under normal conditions of use with an equal and/or current product.
• These warranties shall not apply to products which have been abused, modified, or disassembled.
• Products to be repaired or returned under this warranty must be returned to the factory through an authorized
• Elipson dealer with all transportation and insurance charges prepaid.

To claim repair under warranty

• To claim repair or service under warranty you simply have to contact your local Elipson dealer, from whom your equipment has been purchased. To ensure that you will be able to ship your damaged product in correct manner, always retain the original packaging of your Elipson equipment. If you cannot contact your original dealer, or if you are using your Elipson product outside the purchase country, you should contact Elipson national distributor in the residence country, who will advise where the equipment can be serviced.
• You can also visit our web site to check our contact information : www.elipson.com
• To validate your warranty, you need to produce, as a proof of purchase, your original purchase invoice specifying the date of purchase and stamped by your dealer.

ELIPSON’S POLICY IS TO CONTINUOUSLY INCORPORATE IMPROVEMENTS INTO OUR PRODUCTS.
ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
IF YOU HAVE ANY QUESTIONS, PLEASE VISIT OUR WEBSITE :
WWW.ELIPSON.COM
CONTACT US :
[email protected] OR ON FACEBOOK AND INSTAGRAM

www.elipson.com

References

• Spotify - Connect
• Elipson - High end loudspeakers
• Third Party Licenses | Spotify for Developers

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>