elipson PF 6B Prestige Facet BT Black Bluetooth Speaker Instruction Manual

elipson PF 6B Prestige Facet BT Black Bluetooth Speaker

Here is the detailed product information and product usage instructions for the Prestige Facet series: Product Information:

Prestige Facet 6B: Type Bookshelf Speaker,

• Power Handling  150W RMS,
• Frequency Response  40Hz to 200Hz,
• Sensitivity  92dB/1W/1m,
• Impedance – 6 Ohms,
• Dimensions (without/with stand) – L176 x H298 x P223 mm,
• Weight (without/with stand) – 5.6 kg,
• Colors – Black, White, Black/Walnut.

Prestige Facet 8B: Type  Bookshelf Speaker,

• Power Handling – 40W to 200W,
• Frequency Response – 40Hz to 200Hz,
• Sensitivity – 92dB/1W/1m,
• Impedance – 6 Ohms,
• Dimensions (without/with stand) – L207 x H340 x P323 mm,
• Weight (without/with stand) – 8 kg / 9.3 kg,
• Colors – Black, White, Black/Walnut.

Prestige Facet 14F: Type – Floor standing Speaker,

• Power Handling – 150W RMS,
• Frequency Response – 40Hz to 200Hz,
• Sensitivity – 92dB/1W/1m,
• Impedance – 6 Ohms,
• Dimensions (without/with stand) – L207 x H990 x P302 mm,
• Weight (without/with stand) – 19 kg / 20.5 kg,
• Colors – Black, White, Black/Walnut.

Prestige Facet 24F: Type – Floorstanding Speaker,

• Power Handling – 250W RMS,
• Frequency Response – 50Hz to 350Hz,
• Sensitivity – 93dB/1W/1m,
• Impedance – 6Ohms,
• Dimensions (without/with stand) – L238 x H1011 x P325 mm,
• Weight (without/with stand) – 27.7 kg / 29.5 kg,
• Colors – Black,  White, Black/Walnut.

Prestige Facet 34F: Type – Floor standing Speaker,

• Power Handling – 300W RMS,
• Frequency Response – 70Hz to 350Hz,
• Sensitivity – 94dB/1W/1m,
• Impedance – 6 Ohms,
• Dimensions (without/with stand) – L295 x H1190 x P360 mm,
• Weight (without/with stand) – 42.4 kg / 44.6 kg,
• Colors – Black, White, Black/Walnut.
• Prestige Facet 11C: Type – Center Speaker,
• Power Handling – 120W RMS,
• Frequency Response – 30Hz to 150Hz,
• Impedance – 6 Ohms,
• Dimensions (without/with stand) – L470 x H176 x P180 mm,
• Weight (without/with stand) – 8.4 kg
• , Colors – Black, White, Black/Walnut.

Prestige Facet 14C: Type – Center Speaker,

• Power Handling – 150W RMS,
• Frequency Response – 40Hz to 200Hz,
• Impedance – 6 Ohms,
• Dimensions (without/with stand) – L600 x H207 x P250 mm,
• Weight (without/with stand) – 11.9 kg / 14.9 kg,
• Colors – Black, White, Black/Walnut.

Prestige Facet 6ATM: Type – Surround Speaker (Dipole),

• Power Handling – 80W RMS,
• Frequency Response – 30Hz to 120Hz,
• Impedance – 6 Ohms,
• Dimensions (without/with stand) – L207 x H181 x P290 mm,
• Weight (without/with stand) – 4.8 kg,
• Colors – Black, White, Black/Walnut.

Prestige Facet 7SR: Type – Main/Center/Surround Speaker,

• Power Handling – 150W RMS,
• Frequency Response – 40Hz to 200Hz,
• Impedance – 6 Ohms,
• Dimensions (without/with stand) – L380 x H220 x P170 mm,
• Weight (without/with stand) – 5 kg, Color Black.

Prestige Facet 14LCR:  Type – Main/Center/Surround Speaker,

• Power Handling – 150W RMS,
• Frequency Response – 40Hz to 200Hz,
• Impedance – 6 Ohms,
• Dimensions (without/with stand) – L650 x H280 x P170 mm,
• Weight (without/with stand) – 13 kg,
• Color – Black.

Product Usage Instructions

1. Installation:
   • Before installing your speakers, read the user manual carefully for instructions and safety guidelines.
   • Keep the packaging and user manual for future reference.
2. Connection to Hi-Fi Amplifier:
   • Connect the speakers to your Hi-Fi amplifier using appropriate cables.
   • Follow the color-coded connections for the speakers (Front Right/Left, Center, Surround Right/Left, Surround Back Right/Left).
   • For home cinema setups, connect the subwoofer to the PRE OUT or RCA SUB output of your amplifier.
3. Home Cinema 5.1 Setup:
   • Place the speakers in the desired positions: Front Right/Left, Center, Surround Right/Left.
   • Connect the subwoofer to the designated SUBWOOFER port.
   • Follow the provided diagram for proper speaker connections.
4. Home Cinema 7.1 Setup:
   • In addition to the setup in step 3, add Surround Back Right/Left speakers for a 7.1 configuration.
   • Follow the provided diagram for proper speaker connections.
5. Extension for Home Cinema 7.1.2 Setup:
   • In addition to the setup in step 4, add Height Right/Left speakers for a 7.1.2 configuration.
   • Follow the provided diagram for proper speaker connections.
6. Usage:
   • Refer to the user manual for specific usage instructions and recommendations for each speaker model.
   • Enjoy your Elipson Prestige Facet speakers and make sure to follow proper maintenance and care guidelines.

Please note that this response is based on the given text-extract from the user manual. For complete and accurate instructions, refer to the official user manual provided with the product.

Dear Customer,
Thank you for choosing an Elipson audio product.
Please read carefully the following information before using your new loudspeakers.
It contains tips to get the most of it and instructions for safety use.
We strongly recommend that you keep the packaging and this user manual for further use.

CONTENT

• 1 speaker :
  PF14F, PF24F, PF34F
  PFSUB8, PFSUB10, PFSUB12, PF11C, PF14C, PF14LCR

• 2 speakers :
  PF6B, PF8B, PF6ATM, PF7SR

• 1 user manual

• 1 removable magnetic grid (all speakers)

• 1 removable base + 4 screws :
  PF8B, PF14F, PF24F, PF34F, PFSUB8, PFSUB10, PFSUB12, PF14C

• 4 rubber pads per speaker :
  PF6B, PF8B, PFSUB8, PFSUB10, PFSUB12, PF11C, PF14C, PF6ATM, PF7SR, PF14LCR

• 4 decoupling (thread M8) spikes per speaker :
  PF14F, PF24F, PF34F

PREPARATION

• 1a. Mounting the removable base on the cabinet (PF8B, PF14F, PF24F, PF34F, PF14C)
  Carefully turn the cabinet over and place it on the packaging foams, or on a carpet, to avoid any damage on the top part. Take care not to damage the woodworking, the lacquered front or the loudspeakers during this operation. Adjust the base on the cabinet and screw it using the four provided screws.

• 1b. Mounting the removable base on the subwoofer cabinet (PFSUB8, PFSUB10, PFSUB12) Start by positioning the aluminium cylinders in the recesses provided for this purpose. Place the base on the cylinders and secure with the provided screws

• 2a. Sticking the rubber pads (PF8B, PF14C, PFSUB8, PFSUB10, PFSUB12)
  We recommend that you stick the rubber pads, provided with the removable base, on the loudspeakers. If you use the loudspeakers without the removable base, you should place the rubber pads on the provided inserts, to avoid any damage.
  As a rule, you can stick the rubber pads under the loudspeakers or under its base in order to protect the loudspeaker itself and its base.

• 2b. Putting spikes (PF14F, PF24F, PF34F)
  After mounting the base of the speaker, screw the spikes on it (no required tools).
  Note: The presence of pads or decoupling spikes prevents vibrations to be transmitted to the floor.

• 3a. Mounting the wall speakers (PF7SR, PF14LCR)
  Make sure the brackets have been securely fastened flat against the wall (pay attention to hollow wall anchors) and that the wall is able to bear the weight of the loudspeakers.

• 3b. Positioning the PF14LCR speaker with a permanent screen or TV screen
  Place the speakers as close as possible to the screen. The mounting brackets allow you to install the speaker horizontally or vertically.

• 3c. Positioning the PF14LCR speaker behind a projection screen
  If you have an acoustically transparent screen, we recommend to install the loudspeakers a third of the way down from the top of the screen. Use the middle of the speaker as a reference point (middle of the tweeter). For this configuration, we recommend removing the grills from the speakers.

STEREO SETUP

Position of the speakers FL/FR
The Prestige Facet loudspeakers have been designed to reproduce all types of music as accurately as possible, provided that a few rules should be followed to optimize performance and achieve a realistic sound image.
Ideally, the speakers should be placed symmetrically in front of the listening position to form an equilateral triangle. The cabinets should be placed at the same height and the same distance from the rear wall and the adjacent side surfaces.
In order to optimize the setup of the speakers in your listening room, we recommend the following tests :

• Above all, you should avoid positioning the loudspeakers in the corners of your room. The result will be an artificial increase in the level of bass, masking the speed and details of this range.
• First, adjust the spacing of the two speakers in order to find the realistic balance between a wide sound image (wide apart speakers) and a sound image respecting the punctuality of the voices (close speakers).
• Secondly, move the speakers away from the rear wall by steps of 10 cm to find the balance between the depth of the sound image (far from the back wall) and the level of the extreme low frequencies (close to the back wall).
• Finally, adjust the loudspeakers orientation by turning them gradually toward the center of the listening area. If you leave the speakers parallel, you may want to bring them closer together, if you orient them more than 30°, you may increase their spacing.

Connections
ALL THE CONNECTIONS MUST BE MADE WITH THE EQUIPMENT TURNED OFF.

It is essential to connect the speakers using the correct polarity. Make sure to connect the “ + ” terminal of the speaker (Red) to the “ + ” output terminal of the amplifier. Then, make sure to connect the “ – ” terminal of the speaker (Black) to the “ – ” output terminal of the amplifier. A wrong connection would cause a cribled stereo image and loss of bass. Use high quality speaker cable. Elipson speakers are supplied configured for use in a single wired mode or bi-wiring. Bi-amp is also possible (see page 31).

HOME-CINEMA SETUP 5.1

1. Position of the speakers FL/FR
   Before continuing the operation, please configure your installation by following the instructions on the previous pages

2. Position of the center speaker C (PF11C, PF14C)
   The center speaker must be positioned near the screen for realistic reproduction of dialogue. Ideally, it is placed under the TV set if the TV stand enables it.
   If a standard projection screen is used, the center speaker should be placed at the bottom of the screen for best results. If a microperforated screen is used, it can be positioned behind the screen.

3. Position of the subwoofer SW (PFSUB8, PFSUB10, PFSUB12)
   The subwoofer should be placed between the two front speakers, either on the left or right of the center speaker, and away from the wall.

4. Position of Surround speaker SL/SR (PF7SR, PF14LCR)
   The dipole surround speakers are placed independently on the side walls. They must be positioned at a height of 60 cm above the point of listening. Please, respect the position of PF7SR speakers, using the indications written at their back.

Connections on Home-Cinema amplifier and Home-cinema preamplifier
ALL THE CONNECTIONS MUST BE MADE WITH THE EQUIPMENT TURNED OFF.

It is essential to connect the speakers using the correct polarity. Make sure to connect the “ + ” terminal of the speaker (Red) to the “ + ” output terminal of the amplifier. Then, make sure to connect the “ – ” terminal of the speaker (Black) to the “ – ” output terminal of the amplifier. A wrong connection would cause a cribled stereo image and loss of bass. Use high quality speaker cable. Elipson speakers are supplied configured for use in a single wired mode or bi-wiring. Bi-amp is also possible (see page 31).

INSTALLATION SETUP 7.1

1. Position of setup 5.1
   Before continuing the operation, please configure your installation by following the instructions on the previous pages

2. Position of the back surround speakers SBL/SBR (PF6B/PF8B or PF7SR/PF14LCR)
   Surround back speakers should ideally be placed behind the listening position. Please, respect the position of PF7SR speakers, using the indications written at their back. If the room layout does not allow a backward placement of the back surround speakers, you can use the PF6B or PF8B bookshelve speakers (see diagram – solution 2) in order to finish properly the 7.1 configuration . Note : When placing the surround Back speakers, you can place the PF6B or PF8B bookshelve speakers on the back of the listening position. It is however better to place them in height, ideally on stand.

3. Connections on Home-Cinema amplifier and Home-cinema preamplifier
   ALL THE CONNECTIONS MUST BE MADE WITH THE EQUIPMENT TURNED OFF.

It is essential to connect the speakers using the correct polarity. Make sure to connect the “ + ” terminal of the speaker (Red) to the “ + ” output terminal of the amplifier. Then, make sure to connect the “ – ” terminal of the speaker (Black) to the “ – ” output terminal of the amplifier. A wrong connection would cause a cribled stereo image and loss of bass. Use high quality speaker cable. Elipson speakers are supplied configured for use in a single wired mode or bi-wiring. Bi-amp is also possible (see page 31).

(R) /Left (L)
•SW| SUBWOOFER| Subwoofer

EXTENSION INSTALLATION HOME – 7.1.2

1. Position of the Atmos speakers FHL/FHR (PF6ATM)
   The Prestige Facet Atmos speakers are placed on top of the floor or bookshelf speakers.
   DOLBY ATMOS® is a new technology meant to reproduce surround sound for cinema and home cinema. This DOLBY ATMOS® process creates vertical sound channels in addition to the Dolby 5.1 or 7.1 format (horizontal plane) and thus offers a totally immersive audio experience. In order to have access to this technology and experience the emotion of DOLBY ATMOS®, you have to equip yourself, in addition to your 5.1 or 7.1 system, with dedicated loudspeakers in order to emit sound vertically. There are speakers that are positioned directly in the ceiling, but these require a considerable amount of time and effort to install. There are also specific speakers that direct the sound to the ceiling from the floor. It is this second solution, certified DOLBY ATMOS®, that Elipson has adopted, simplifying the installation process. These loudspeakers, whose drivers are specifically filtered and tilted, emit a sound field towards the ceiling which must imperatively be reflective. The sound waves are thus reflected off of the ceiling to allow the listener to benefit from this vertical sound dimension. The rendering is ultra realistic, for a completely immersive experience in the heart of your movie. You can buy one or two pairs of ATM speakers, placed at the front (1st pair) and also at the back (2nd pair) of your dedicated home cinema room, directly on your main speakers or surround speakers. You can also opt for the IXATM floorstanding loudspeaker with a built-in DOLBY ATMOS® module. In order to fully enjoy the DOLBY ATMOS® sound, your amplifier must be compatible with this technology, and have enough channels and the associated digital processing technology.
   Caution : A Dolby Atmos compliant amplifier is essential to the proper use of the speakers. Contact your dealer for more informations.

2. Connections on Home-Cinema amplifier and Home-cinema preamplifier

ALL THE CONNECTIONS MUST BE MADE WITH THE EQUIPMENT TURNED OFF.

It is essential to connect the speakers using the correct polarity. Make sure to connect the “ + ” terminal of the speaker (Red) to the “ + ” output terminal of the amplifier. Then, make sure to connect the “ – ” terminal of the speaker (Black) to the “ – ” output terminal of the amplifier. A wrong connection would cause a cribled stereo image and loss of bass. Use high quality speaker cable. Elipson speakers are supplied configured for use in a single wired mode or bi-wiring. Bi-amp is also possible (see page 31).

(R) /Left (L)
•SW| SUBWOOFER| Subwoofer
•  FHL/FHR| HEIGHT RIGHT/LEFT| Atmos speaker Front right (R) /Left (L)

USE

1. Burn-in period
   When you take them out of the packaging, the Prestige Facet speakers are not yet able to reproduce with the same efficiency all the sound frequencies they are supposed to play. The Prestige Facet range loudspeakers are complex mechanical assemblies which need a period of adaptation (“burn-in”) to operate at their best and become acclimatised to the temperature and humidity conditions of your environment. This burn-in period may last for some weeks, but you can quicken it by operating the speakers between 50 and 100 hours consecutively, on a moderate volume and broadcasting a radio station.

2. Bi-wiring and bi-ampification (All models, except PF6ATM and PF7SR)
   Bi-wiring can increase the performance of your loudspeakers. Only one amplifier is necessary, but two distinct cables are used to, individually, powered the treble drivers and the bass drivers on the speaker. Good quality cables are required for an efficient bi-wiring. The Prestige Facet speaker have a 4 terminals binding post, allowing bi-wiring and bi-amplification.
   Top terminals for treble, bottom terminals for bass. For a mono-amplification use, connect the terminals with the metallic straps and connect the cables on 2 terminals.
   For a bi-amp, two amplifiers are used separately for treble and bass
   Note: The PF7SR and PF6ATM models have a single binding terminal.

3. Choice of cables
   Choose high quality cables with a cross-section appropriate to their length. You can also replace the provided metallic straps by a strap using the same speaker cable you use to connect your loudspeakers to your amplifier. Your Elipson dealer will be able to advise you.

4. Choice of amplifier
   Your setup type (stereo or home-cinema) will determine the choice of the appropriate amplifier. Your dealer will be able to advise you on the most suitable amplifier for your system.

5. Cleaning instructions
   To improve the lifetime of your speakers, we recommend regular cleaning. A soft cloth will be enough for dusting. If the speaker is stained, we recommend simply using a damp cloth with some mild soap if necessary. The lacquered front panel can be cleaned with a soft cloth and standard glass cleaning product.
   Never use solvents, detergents, alcohol-based or corrosive products, scrapers or scourers to avoid any damage on the speaker surface.
   Keep the loudspeakers away from sources of heat.

SPECIFICATIONS

| Prestige Facet                    Prestige Facet 6B 8B| Prestige Facet 14F| | Prestige Facet 24F| Prestige Facet 34F| Prestige Facet 11C| Prestige Facet 14C
---|---|---|---|---|---|---|---
Type| Bookshelf speaker Bookshelf speaker

2-way                                                2-way

Bass-reflex                                        Bass-reflex

| Floor standing speaker 2 ½-way

Bass-reflex

| | Floorstanding speaker 3 ½-way

Bass-reflex

| Floorstanding speaker 3 way

Bass-reflex

| Centre speaker 2-way

Sealed

| Centre speaker 2-way

Laminar bass-reflex

Power| 70W RMS                                          85W RMS| 150W RMS| | 250W RMS| 300W RMS| 120W RMS| 500W RMS
Power amplifier| 20 – 100W                                          30 – 120W| 40 – 200W| | 50 – 350W| 70 – 350W| 30 – 150W| 40 – 200W
Loudspeakers| Tweeter : 1”                                     Tweeter : 1”

Mid-woofer : 5”                              Mid-woofer : 7”

| Tweeter : 1”

Mid-woofer : 7”

Woofer : 7”

| | Tweeter : 1”

Mid-range : 7”

Woofers : 2 x 8”

| Tweeter : 1”

Mid-ranges : 2 x 7”

Woofers : 2 x 10”

| Tweeter : 1”

Mid-woofers : 2 x 5”

| Tweeter : 1”

Mid-woofers : 2 x 7”

Frequency response| 57Hz-25kHz (±3dB)                          47Hz- 25kHz (±3dB)| 38Hz-25kHz (±3dB)| | 28Hz-25kHz (±3dB)| 25Hz-25kHz (±3dB)| 55Hz- 25kHz (±3dB)| 43Hz-25kHz (±3dB)
Sensitivity| 90dB/1W/1m 91dB/1W/1m| 92dB/1W/1m| | 93dB/1W/1m| 94dB/1W/1m| 92dB/1W/1m| 93dB/1W/1m
Impedance| 6 Ohms                                             6 Ohms| 6 Ohms| | 6 Ohms| 6 Ohms| 6 Ohms| 6 Ohms
| | | | | | |
Dimensions without stand| W176 x H298 x D223 mm             W207 x H340 x D323 mm| W207 x H990 x D302 mm| | W244 x H1100 x D360 mm| W295 x H1190 x D360 mm| W470 x H176 x D180 mm| W600 x H207 x D250 mm
Dimensions with stand| – W230 x H361 x D348 mm| W238 x H1011 x D325 mm| | W274 x H1121 x D383 mm| W355 x H1211 x D420 mm| –| W623 x H228 x D275 mm
Weight without/with stand| 5.6 kg / – 8 kg / 9.3 kg| 19 kg / 20.5 kg| | 27.7 kg / 29.5 kg| 42.4 kg / 44.6 kg| 8.4 kg / –| 11.9 kg / 14.9 kg
Colours| Black, white, black/walnut         Black, white, black/walnut| Black, white, black/walnut| | Black, white, black/walnut| Black, white, black/walnut| Black, white, black/walnut| Black, white, black/walnut

| Prestige Facet                    Prestige Facet 6B 8B| Prestige Facet 14F| | Prestige Facet 24F| Prestige Facet 34F| Prestige Facet 11C| Prestige Facet 14C
---|---|---|---|---|---|---|---
Type| Bookshelf speaker Bookshelf speaker

2-way                                                2-way

Bass-reflex                                        Bass-reflex

| Floorstanding speaker 2 ½-way

Bass-reflex

| | Floorstanding speaker 3 ½-way

Bass-reflex

| Floorstanding speaker 3 way

Bass-reflex

| Centre speaker 2-way

Sealed

| Centre speaker 2-way

Laminar bass-reflex

Power| 70W RMS                                          85W RMS| 150W RMS| | 250W RMS| 300W RMS| 120W RMS| 500W RMS
Power amplifier| 20 – 100W                                          30 – 120W| 40 – 200W| | 50 – 350W| 70 – 350W| 30 – 150W| 40 – 200W
Loudspeakers| Tweeter : 1”                                     Tweeter : 1”

Mid-woofer : 5”                              Mid-woofer : 7”

| Tweeter : 1”

Mid-woofer : 7”

Woofer : 7”

| | Tweeter : 1”

Mid-range : 7”

Woofers : 2 x 8”

| Tweeter : 1”

Mid-ranges : 2 x 7”

Woofers : 2 x 10”

| Tweeter : 1”

Mid-woofers : 2 x 5”

| Tweeter : 1”

Mid-woofers : 2 x 7”

Frequency response| 57Hz-25kHz (±3dB)                          47Hz- 25kHz (±3dB)| 38Hz-25kHz (±3dB)| | 28Hz-25kHz (±3dB)| 25Hz-25kHz (±3dB)| 55Hz- 25kHz (±3dB)| 43Hz-25kHz (±3dB)
Sensitivity| 90dB/1W/1m 91dB/1W/1m| 92dB/1W/1m| | 93dB/1W/1m| 94dB/1W/1m| 92dB/1W/1m| 93dB/1W/1m
Impedance| 6 Ohms                                             6 Ohms| 6 Ohms| | 6 Ohms| 6 Ohms| 6 Ohms| 6 Ohms
| | | | | | |
Dimensions without stand| W176 x H298 x D223 mm             W207 x H340 x D323 mm| W207 x H990 x D302 mm| | W244 x H1100 x D360 mm| W295 x H1190 x D360 mm| W470 x H176 x D180 mm| W600 x H207 x D250 mm
Dimensions with stand| – W230 x H361 x D348 mm| W238 x H1011 x D325 mm| | W274 x H1121 x D383 mm| W355 x H1211 x D420 mm| –| W623 x H228 x D275 mm
Weight without/with stand| 5.6 kg / – 8 kg / 9.3 kg| 19 kg / 20.5 kg| | 27.7 kg / 29.5 kg| 42.4 kg / 44.6 kg| 8.4 kg / –| 11.9 kg / 14.9 kg
Colours| Black, white, black/walnut         Black, white, black/walnut| Black, white, black/walnut| | Black, white, black/walnut| Black, white, black/walnut| Black, white, black/walnut| Black, white, black/walnut

Type| Atmos speaker 2-way

Sealed

| Surround dipolar speaker 2-way

Bass-reflex

| Front/centre/surround speaker

2-way Bass-reflex

---|---|---|---
Power| 70W RMS| 80W RMS| 150W RMS
Power amplifier| 30 – 120W| 30 – 120W| 40 – 200W
Loudspeakers| Horn tweeter : 1” Mid-woofer : 5”| Horn tweeters : 2 x 1”

Mid-woofer : 5”

| Tweeter : 1”

Mid-woofers : 2 x 7”

Frequency response| 65Hz-25kHz (±3dB)| 65Hz-25kHz (±3dB)| 53Hz-25kHz (±3dB)
Sensitivity| 90dB/1W/1m| 87dB/1W/1m| 93dB/1W/1m
Impedance| 6 Ohms| 8 Ohms| 6 Ohms
Dimensions without stand| W207 x H181 x D290 mm| W380 x H220 x D170 mm| W650 x H280 x D170 mm
---|---|---|---
Dimensions with stand| –| –| –
Weight without/with stand| 4.8 kg / –| 5 kg / –| 13 kg / –
Colours| Black, white, black/walnut| Black| Black

Type| Subwoofer Bass-reflex Down-firing| Subwoofer Bass-reflex Down- firing| Subwoofer Bass-reflex Down-firing
---|---|---|---
Output power| 150W RMS Class D| 250W RMS Class D| 500W RMS Class D
Loudspeaker| Woofer : 8”| Woofer : 10”| Woofer : 12”
Frequency response| 35Hz-150Hz (±3dB)| 27Hz-150Hz (±3dB)| 22Hz-200Hz (±3dB)
Subsonic filter| 24dB at 20Hz| 24dB at 20Hz| 24dB at 20Hz
Variable cut-off freq.| 50Hz to 150Hz| 40Hz to 150Hz| 30Hz to 200Hz
Adjustable phase| –| 0° to 180°| 0° or 180°
Standby| Auto| Auto| Auto
Inputs| Stereo line level, LFE| Stereo line level, LFE| Stereo line level, LFE
Dimensions| W350 x H374 x D405 mm| W405 x H424 x D469 mm| W410 x H410 x D496 mm
---|---|---|---
Weight| 16 kg| 22 kg| 29 kg
Colours| Black, white, black/walnut| Black, white, black/walnut| Black, white, black/walnut

WARNING Packaging
The packaging (box and packing) was designed for effective protection of your Elipson loudspeakers and electronics during transportation and shipping. Please save them for later use.

Protect the environment
If you wish to dispose of the packaging, please do so in the most environmentally responsible manner possible according to available measures (for example, sorted recycling). At the end of its life, this device should not be disposed of the same way as household refuse. It should be returned to a center for the recycling of electronic equipment. This symbol on the product indicates that it has been designed so that it can be recycled according to specific procedures. You will therefore be making a significant contribution to the protection of the environment. This device respects the RoHS European directive. This means that it does not emit polluting substances when it is recycled (such as lead, mercury, cadmium, hexavalent chromium, polybromobiphenyles, polybromdiphenylethers).

Precautions for proper use

This product was designed according to rigorous norms and complies with safety standards. It should only be used under normal conditions as described below. Verify the electrical voltage before connecting it to a power source. This electronic device was designed to work in numerous countries. We advise you to hook it up completely before connecting it to the AC power source. Take care when unplugging the power cord. When you unplug the power cord from the power source, do so by pulling on the head of the plug rather than on the cable. If you do not expect to use this device for a prolonged period of time, you are advised to unplug it from the power source. Do not open the case. This device contains no parts that can be exchanged by the user. Accessing the inside of this device’s case can lead to electric shock. Any modification to the product will nullify the guarantee. If a foreign object or liquid falls into the case, contact your retailer to arrange for a technician to remove it from the device safely.

WARRANTY

Elipson speakers has been designed and manufactured to the highest quality standards. If something goes wrong with your product, Elipson or its authorized distributor / dealer will handle the service and repair under these limited warranty terms. This limited warranty is valid for a 2-year period from original purchase date from an authorized Elipson dealer.

Terms of limited warranty
The warranty is limited to equipment repair. Neither transportation, nor any other costs, nor any risk for removal, transportation and installation of products is covered by this warranty. The warranty is only valid for the original purchaser and is not transferable.

The warranty will not apply in cases other than defects in materials and / or workmanship at the date of purchase and will not be applicable in the following cases :

• Damages caused by wrong or incorrect installation or connection.
• Damages caused by incorrect use, other use than the one described in the owner’s manual, negligence, unauthorized modification or use of parts or of accessories that are not authorized by Elipson.
• Damages caused by unauthorized, unsuitable or faulty ancillary equipment.
• Damages caused by accidents, lightning, water, fire, heat or any other disturbance that would not be under Elipson control or responsibility.
• For products, which serial number has been altered, deleted, removed or made illegible.
• In case of repair and service executed by an unauthorized service person.
  This warranty complements any national/federal/regional law obligations of local distributors/dealers and does not affect your statutory rights as a customer.

To claim repair under warranty
To claim repair or service under warranty you simply have to contact your local Elipson dealer, from whom your equipment has been purchased. To ensure that you will be able to ship your damaged product in correct manner, always retain the original packaging of your Elipson equipment. If you cannot contact your original dealer, or if you are using your Elipson product outside the purchase country, you should contact Elipson national distributor in the residence country, who will advise where the equipment can be serviced.
You can also visit our web site to check our contact information : www.elipson.com
To validate your warranty, you need to produce, as a proof of purchase, your original purchase invoice specifying the date of purchase and stamped by your dealer.

Website: www.elipson.com

References

• Elipson - High end loudspeakers

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>