elipson PF 14F BT Prestige Facet Powered Bluetooth Speaker Instruction Manual
- June 6, 2024
- elipson
Table of Contents
Prestige Facet
Powered Bluetooth Speaker
Dear Customer,
Thank you for choosing an Elipson audio product.
Please read carefully the following information before using your new
loudspeakers.
It contains tips to get the most of it and instructions for safety use.
We strongly recommend that you keep the packaging and this user manual for
further use.
FCC STATEMENT
-
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. -
any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits arc designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver. Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. Consult the dealer or an experienced radio/TV
technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance 20cm between the radiator & your body
IC warning
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation. Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference; and
- This device must accept any interference, including interference that may cause undesired operation of the device.
FCC/ IC Radiation Exposure Statement
This equipment complies with FCC and IC radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance 20cm between the radiator & your body
CONTENT
| Prestige Facet 6B BT | Prestige Facet 14F BT |
|---|
• 1 active speaker
• 1 passive speaker
• 2 removable magnetic grids
• 8 rubber pads
• 1 user manual
• 1 remote control
• 1 speaker cable
• 1 power cable| • I active speaker
• I passive speaker
• 2 removable bases
• 2 removable magnetic grids
• 8 screws
• 8 decoupling spikes
• I user manual
• I remote control
• I speaker cable
• I power cable
SETUP
SETUP PRESTIGE FACET 68 BT
Sticking the rubber pads
We recommend that you stick the rubber pads under the loudspeakers to protect itself.
SETUP PRESTIGE FACET 14F BT
- Mounting the removable base on the cabinet
Caref0y turn the cabinet over and place it on the packaging foams, or on a carpet, to avoid any damage of the top part. Take care not to damage the woodworking, the lacquered front or the drivers during This operation. Adjust the base on the cabinet and screw it using the four provided screws. - Putting spikes
After mounting the base of the speaker, screw the spikes on it
(no required tools). Note : The presence of pads or decoupling spikes prevents
vibrations to be transmitted to the floor.
FRONT AND REAR PANEL
PRESTIGE FACET 6B BT FRONT – ACTIVE
PRESTIGE FACET 6B BT
REAR – ACTIVE
PRESTIGE FACET 14F BT FRONT – ACTIVE
PRESTIGE FACET 14F BT REAR – ACTIVE
STEREO SETUP
POSITION OF THE SPEAKERS
The Prestige Facet loudspeakers have been designed to reproduce all types of
music as accurately as possible, provided that a few rules should be followed
to optimise performance and achieve a realistic sound image.
Ideally, the speakers should be placed symmetrically in front of the listening
position to form an equilateral triangle. The cabinets should be placed at the
same height and the same distance from the rear wall and the adjacent side
surfaces.
In order to optimise the setup of the speakers in your listening room, we
recommend the following tests :
- Above all, you should avoid positioning the loudspeakers in the corners of your room. The result will be an artificial increase in the level of bass, masking the speed and details of this range.
- First, adjust the spacing of the two speakers in order to find the realistic balance between a wide sound image (wide apart speakers) and a sound image respecting the punctuality of the voices (close speakers).
- Secondly, move the speakers away from the rear wall by steps of 10 cm to find the balance between the depth of the sound image (far from the back wall) and the level of the extreme low frequencies (close to the back wall).
- Finally, adjust the loudspeakers orientation by turning them gradually toward the center of the listening area. If you leave the speakers parallel, you may want to bring them closer together, if you orient them more than 30°, you may increase their spacing.
Note: Floorstanding speakers (PF 14F BT) are naturally positioned at listening height, by their dimensions. It is recommended to place the PF 6B BT speakers on legs in order to satisfy the listening position.
Prestige Facet 6B BT setup
Prestige Facet 14F BT setup
SPEAKER WIRING DIAGRAM
Connect the REDH and BLACK (-1 terminals from the active speaker to the
corresponding terminals on the passive speaker using the included speaker
cable. The active speaker has to be placed on the left of your setup, the
passive speaker on the right, to insure a good stereophonics quality. Sheath
on cable must be stripped on all ends.
Note: Please do not connect two active speakers in stereo.
Connect the power supply cable.
WARNING: Do not connect extern amplifier to output active speaker
Prestige Facet 6B BT setup
Prestige Facet 14F BT setup
REMOTE CONTROL
PAIRING SPEAKER TO A BLUETOOTH SOURCE
PAIRING WITH REMOTE CONTROL
Turn on your Prestige Facet.
On the remote, press Bluetooth key.
On the remote, select Pair key. This will put your Prestige Facet into
detectable mode. The LED light will flash quickly.
Please make sure that the Bluetooth function is enabled
on your Bluetooth Audio Device.
On your Bluetooth Audio Device, please select PF6BBT or
PF14FBT.
If pairing is successfull, the LED tight will stay solid.
PAIRING DIRECTLY ON THE ACTIVE SPEAKER
Turn on your Prestige Facet 68 BT or your Prestige Facet 14F BT with a short
press on the volume control.
Press briefly several times the volume control until Bluetooth input is selected (LED light blinks slowly).
Press and hold the volume control. This will allow your Prestige Facet to be
detected. The LED fight will blink rapidly.
Make sure the Bluetooth function is enabled on your Bluetooth
audio device.
On your Bluetooth Audio Device, please select PF6BBT or
PF 1 4FBT. If pairing is successfull, the LED fight will stay solid.
CONNECTING TO ANOTHER SOURCE
CHANGING THE INPUT
Inputs can be selected with the
suppled remote control or with the Volume Adjustment) on the back of the
speaker.
AUX2 INPUT: JACK 3.5 MM
Plug our domestics devices (MP3, smartphones, laptop,…)
with help of 3.5mini jock to the AUX2 input
WARNING: When connecting audio cable, make sure that your speakers are
turned off.
DIGITAL OPTICAL INPUT
To use the opticab input to connect our digital
devices with help to optical cable. You can get a better audio quay with this
input.
SUBWOOFER OUTPUT
If you need more bass, you can connect a powered Subwoofer to your Prestige Facet by using an analog RCA cable.
AUXI INPUT (LINE)
Connect any audio analog stereo
source with RCA cable.
WARNING: When connecting audio cable, make sure that your speakers are
turned off.
AUX1 INPUT (PHONO)
Connect your turntable to the RCA – AUX.1 input. Make
sure that the phono or line input selector is in c(PHONO)) position.
WARNING: Connect the ground wire of your turntable to the ground phono
input of the speaker
USE
-
Bum-In period
When you take them out of the packaging, the Prestige Facet speakers are not yet able to reproduce with the same efficiency all the sound frequencies they are supposed to play. The Prestige Facet range loudspeakers are complex mechanical assemblies which need a period of adaptation (“burn-in”) to operate at their best and become acclimatised to the temperature and humidity conditions of your environment. This burn-in period may last for some weeks, but you can quicken it by operating the speakers between 20 and 50 hours consecutively, on a moderate volume and broadcasting a radio station. -
Cleaning Instructions
To improve the lifetime of your speakers, we recommend regular cleaning. A soft cloth will be enough for dusting. If the speaker is stained, we recommend simply using a damp cloth with some mild soap if necessary. The lacquered front panel can be cleaned with a soft cloth and standard glass cleaning product. Never use solvents, detergents, alcohol-based or corrosive products, scrapers or scourers to avoid any damage on the speaker surface. Keep the loudspeakers away from sources of heat.
SPECIFICATIONS
| Prestige Facet 6B BT | Prestige Facet 14F BT |
|---|---|
| Type | Bookshelf 2 way – bass-reflex |
reflex
Power| 2 x 70 W RMS – Class D| 2 x 150 W RMS – Class D
Unit driv ers| Tweeter 25mm| Tweeter 25mm
| Medium170 mm
Medium-Wooferl 40 mm| Woofer170 mm
Frequency Response| 57Hz – 25kHz| 38Hz – 25kHz
Sensitivity| 90dB/1W/lm| 92dB/1W/1m
Inputs| RCA Line – RCA Phono 3,5mm jack – Optical S/PDIF| RCA Line – RCA
Phono 3,5mm jack – Optical S/PDIF
Output| Subwoofer 20-220 Hz (+1-3dB)| Subwoofer 20-220 Hz (+/-3dB)
Dimensions| WI76 x H298 x D223mm| W238 x H 1026 X D325mm
Weight| Active : 7kg / Passive : 5,6kg| Active : 22kg / Passive : 20,5kg
WARNING
Packaging
The packaging (box and packing) was designed for the effective protection of
your Elipson loudspeakers and electronics during transportation and shipping.
Please save them for later use. Protect the envionment: if you wish to dispose
of the packaging, please do so in the most environmentally responsible manner
possible according to available measures (for example, sorted recycling). At
the end of its life, this device should not be disposed of the same way as
household refuse. It should be returned to a center for the recycling of
electronic equipment. This symbol on the product indicates that it has been
designed so that it can be recycled according to specific procedures. You will
therefore be making a significant contribution to the protection of the
environment. This device respects the RoHS European directive. This means that
it does not emit polluting substances when it is recycled (such as lead,
mercury, cadmium, hexavalent chromium, polybromobiphenyles,
polybromdiphenylethers).
Precautions for proper use
This product was designed according to rigorous norms and complies with safety
standards. It should only be used under normal conditions as described below.
Verify the electrical voltage before connecting it to a power source. This
electronic device was designed to work in numerous countries. We advise you to
hook it up completely before connecting it to the AC power source. Take care
when unplugging the power cord. When you unplug the power cord from the power
source, do so by pulling on the head of the plug rather than on the cable. If
you do not expect to use this device for a prolonged period of time, you are
advised to unplug it from the power source. Do not open the case. 
This device contains no parts that can be exchanged by the user.
Accessing the inside of this device’s case can lead to electric shock. Any
modification to the product will nulify the guarantee. If a foreign object or
liquid falls into the case contact your retailer to arrange for a technician
to remove it from the device safely.
WARRANTY
Elipson speakers has been designed and manufactured to the highest quality standards. If something goes wrong with your product, Eipson or its authorized distributor/dealer wil handle the service and repair under these limited warranty terms. This limited warranty is valid for a 2-year period from original purchase date from an authorized Eipson dealer.
Terms of limited warranty
The warranty is limited to equipment repair. Neither transportation, nor any other costs, nor any risk for removal, transportation and installation of products is covered by this warranty. The warranty is only valid for the original purchaser and is not transferable. The warranty will not apply in cases other than defects in materials and / or workmanship at the date of purchase and will not be applicable in the following cases :
- Damages caused by wrong or incorrect installation or connection.
- Damages caused by incorrect use. other use than the one described in the owner’s manual, negligence, unauthorized modification or use of parts or of accessories that are not authorized by Elipson.
- Damages caused by unauthorized, unsuitable or faulty anclary equipment.
- Damages caused by accidents, lightning, water, fire, heat or any other disturbance that would not be under Elipson control or responsibility.
- For products, which serial number has been altered, deleted, removed or made illegible.
- In case of repair and service executed by an unauthorized service person.
This warranty complements any national/federal/regional law obligations of local distributors/ dealers and does not affect your statutory rights as a customer.
To claim repair under warranty
To claim repair or service under warranty you simply have to contact your
local Elipson dealer, from whom your equipment has been purchased To ensure
that you will be able to ship your damaged product in correct manner, always
retain the original packaging of your Elipson equipment. If you cannot contact
your original dealer, or if you are using your Epson product outside the
purchase country, you should contact Elipson national distributor in the
residence country, who will advise where the equipment can be serviced.
You can also visit our web site to check our contact information:
www.elipson.com
To validate your warranty, you need to produce, as a proof of purchase, your
original purchase invoice specifying the date of purchase and stamped by your
dealer.
The Bluetooth word mark and logos
are owned by the Bluetooth SIG. Inc. and any use of such marks by Elipson is
under tense. Other trademarks and trade names are those of their respective
owners.
Qualcomm® aptX™ 
Qualcomm is a trademark of Qualcomm Incorporated. registered in the United
States and other countries, used with permission. aptX is a trademark of
Qualcomm Technologies International, Ltd., registered in the (kited States and
other countries, used with permission.
© Epson 2017
Epson is a registered trademark of AV Industry.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>