comsol PBH10BK 10-000mAh USB-C PD Power Bank Charger User Manual
- June 3, 2024
- comsol
Table of Contents
Model: PBH10BK
10,000mAh USB-C PD Power Bank Charger
User Manual v1.1
PBH10BK 10-000mAh USB-C PD Power Bank Charger
- USB-A Output 1
- USB-C Input/Output
- USB-A Output 2
- Power On/Off
- LED Battery Capacity
Features & Specification
- Battery type: Lithium-Polymer
- 10,000mAh provides 360% extra battery for an average smartphone*
- USB-C PD (Power Delivery) port can fast charge an iPhone 8 or later from 0 to 50% in 30 minutes
- Rechargeable more than 500 times
- Includes 20cm USB-A to USB-C cable to charge power bank
- Built-in over charging and short circuit protection
- Watt Hour Rating: 38.5Wh
- 360% extra battery based on an iPhone 8 with 1821mAh battery
- USB-C Input: DC 5V/3A 9V/2.2A 12V/1.67A
- USB-C Output: DC 5V/3A 9V/2.2A 12V/1.67A
- USB-A Output 1 & 2: DC 4.5V/5A 5V/4.5A 9V/2A 12V/1.5A
- Total Output: 22.5W
- Charging Time: 4 to 6 hours depending on charger output
- Size: 110mm (L) x 72mm (W) x 16mm (H)
- Weight: 180g
- Certifications: RCM, RoHS, UN38.3
To Charge Power Bank
- Charge the power bank using the USB-C port
- To charge, use the USB-A to USB-C cable and connect the power bank to a wall charger
- During charging the LEDs will flash to show charging status
- When charging is complete all 4 LED’s will remain on
To Charge Phone or USB device
- You can charge one, two or three devices simultaneously
- To fast charge a compatible device, use the USB-C port Use a USB-C to Lightning cable to fast charge an iPhone or a USB-C to USB-C cable to fast charge an Android device
- To charge at standard speeds, use the USB-A port Use a USB-A to Lightning cable to charge an iPhone or the included USB-A to USB-C cable to charge an Android device
- When your device is connected charging should automatically commence
To Check Remaining Capacity
• Press the On/Off button and the digital LED will show remaining capacity
• The digital LED will turn off automatically after 40 seconds
CAUTION
- Do not drop, misuse or apply excessive force to your power bank. Power banks contain batteries and a circuit board with fragile components that can be damaged if misused. If you drop or damage your power bank, discontinue use immediately.
- If crushed, punctured, exposed to fire or high temperatures or disassembled, batteries may catch fire, explode or cause burns.
- If your power bank swells or bulges, stop use immediately and dispose of the power bank in an appropriate manner. Continued use may cause the power bank to catch fire or explode.
- Do not charge the power bank and your device at the same time. It may cause the power bank to overheat.
- Store power bank in a cool and dry place. Do not store in hot or humid environments. Eg. In a car or directly in the sun.
- Power bank usage by children should be supervised.
- Do not put your power bank in a handbag, backpack or other bag where small metal objects can cause a short circuit.
- Do not dispose of power bank in heat or fire.
- All Comsol power banks have safety power cut off features to stop overcharging & overheating. However, we commend disconnecting the power bank once it is fully charged and removing all cables.
- When charging a device, the power bank may feel warm, this is a normal operating condition & should not be cause for concern.
- In normal conditions, battery performance will decline over several years.
- Operating temperature should be between 0˚c to 45˚c.
iPhone and Lightning are trademarks of Apple Inc.,
registered in the U.S. and other countries. USB-C
is a trademark of USB Implementers Forum.
Android is a trademark of Google Inc.
www.mycomsol.com.au
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>