ANSMANN WL230B Workshop Lamp Instruction Manual

: August 22, 2024
: ANSMANN

Table of Contents

SIGNS AND SYMBOLS
****PROPER INTENDED USE
****SAFETY INSTRUCTIONS
INSERTING THE BATTERIES
CARE AND MAINTENANCE
DISPOSAL
LIMITATION OF LIABILITY
DELIVERY INCLUDES
PRODUCT DESCRIPTION (SEE PAGE 2)
OPERATION
TECHNICAL DATA
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ANSMANN WL230B Workshop Lamp Instruction Manual

ORIGINAL OPERATING INSTRUCTIONS:

First unpack all parts and check that everything is there and that nothing is damaged. Do not use damaged products. If you find damage on the product, contact your dealer.

SIGNS AND SYMBOLS

Please take note of the following symbols and words used in the operating instructions, on the product and on the packaging.

= Information : Useful additional information about the product
= Note : This note warns you of possible damage of all kinds
= Warning : Attention – Danger! May result in serious injury or death

****PROPER INTENDED USE

The device serves as a battery-operated, mobile light source. The product is intended exclusively for private household use and not for commercial use.

Read through the complete operating instructions carefully before using the product for the first time. They contain important information for handling the product. If you pass on the product to third parties, pass on these operating instructions as well.

Never expose the product to extreme conditions (extreme heat/cold).
Do not immerse the product in water
Keep the product and the packaging away from children. This product is not a toy. Children should be supervised in order to ensure that they do not play with the product.
This product is not to be used by persons (including children) who have restricted physical, sensory or mental capabilities or who do not have adequate experience and knowledge in handling this product. Such persons must be instructed beforehand by a supervisory person who is responsible for their safety or must be supervised during the use of the product!
Do not modify the product! Repair work shall only be carried out by the manufacturer or by a service technician appointed by the manufacturer or by a similarly qualified person.
The lamp may be used indoors exclusively.
Always keep the product dry.

NOTE:

This product contains batteries. Do not throw the product into a fire.
Improperly inserted batteries could leak and/or cause a fire/explosion
Always change all of the batteries at the same time as a complete set and always use equivalent batteries
Keep batteries away from children > Risk of choking or suffocating
Never try to open, crush or heat a battery or set it on fire.
Do not use the batteries if the product appears to be damaged.
The batteries cannot be recharged!
Always dispose of used batteries & rechargeable batteries in accordance with the local regulations and requirements.
In the event of battery leakage, do not touch. If you come into contact with battery fluid, wash the affected area thoroughly and immediately with plenty of water.
If the battery fluid has caused a skin reaction or has come into contact with your eyes, contact a medical professional immediately.
Do not short-circuit the batteries!
Remove used or empty batteries from the lamp immediately
If the lamp can no longer be used, the batteries must be removed from the lamp before it is disposed of

****SAFETY INSTRUCTIONS

Do not look directly into the light beam. Do not shine the light in other people’s faces. If this occurs for too long, the blue light portion of the beam can cause retinal damage.
The product is categorised as protective class III and thus operates with a non-hazardous voltage range.

INSERTING THE BATTERIES

3 batteries are included with the delivery. In order to activate the product, open the battery compartment and insert the batteries. Ensure that the batteries are inserted with the correct polarity.

CARE AND MAINTENANCE

Cleaning :

Disconnect the power supply from the product before any cleaning.
Use only a soft, dry or slightly moist cloth (with a little mild washing-up liquid if
required) for cleaning. Do not use abrasive agents or solvents for cleaning.

Maintenance :

If the product is not going to be used, remove the batteries and store separately in order to preserve service life.

DISPOSAL

Dispose of unserviceable lamps in accordance with legal provisions. The “waste bin” symbol indicates that, in the EU, it is not permitted to dispose of electrical equipment in household waste. Use the return and collection systems in your area or contact the dealer from whom you purchased the product.
For disposal, pass the device on to a specialist disposal point for old equipment. Do not dispose of the device via household waste as the device contains batteries / re- chargeable batteries. In this way you will fulfil your legal obligations and contribute to environmental protection.

LIMITATION OF LIABILITY

The information contained within these operating instructions can be changed without prior notification. We accept no liability for direct, indirect, incidental or other damage or consequential damage arising though improper handling or through disregard of the information contained within these operating instructions. We accept no liability or warranty claims or guarantee claims in the event of incorrect use of the product.

DELIVERY INCLUDES

1x Plastic workshop lamp
3x AAA 1.5V batteries
1x Operating instructions

First unpack all parts and check that everything is there and that nothing is damaged. Do not use damaged products. If you find damage on the product, contact your dealer.

PRODUCT DESCRIPTION (SEE PAGE 2)

LED
On/off button
Base and fastening clip
Mounting magnets
Battery compartment
Hanging hook

OPERATION

Button
Press 1x: Top LED on
Press 2x: Front LED on
Press 3x: Front LED off

The work lamp can be hung from suitable hanging points with the help of the hanging hook.
The magnets on the underside of the lamp enable the product to be mounted on metallic surfaces.
The clip on the base also enables the lamp to be fastened to different objects.