JOYROOM JR-W020 20W Magnetic Wireless Charging Power Bank User Manual
- August 26, 2024
- Joyroom
Table of Contents
User Manual
Product introduction
This power bank can provide wired charging or wireless charging function for mobile phones, tablets, book readers, game machines and other products. Equipped with wireless and wired 2-in-1 charging design, snap and charge, the strong magnetic force can achieve wireless charging function, And it supports iP PD 20W fast charging. Samsung AFC, QC, FCP and other brands of fast charging protocols. The product has a built-in smart chip and a variety of safety protections such as over-charge, over-discharge, over-voltage and over- temperature protection, etc.
Parameters
Model: JR-W020
Battery: Polymer Lithium Battery
Capacity: 10000mAh 3.85V(38.5Wh)
Rated Capacity: 5800mAh (5V 2.4A)
Energy Conversion Rate: 275%
Type-C Input: 5V 3A, 9V 2A
Type-C Output: 5V 22.4A, 9V 2.22, 12V 1.674
USB-A Output: SV 2.44, 9V 2A, 1ZV5 1.54
Wireless Output: 5W/7.5W/10\W/15W(Max)
Multi-port Output: 5V 3A (Max}
Size: 105°68*20mm
Material: PC+ABS fireproof material
Net weight: 205g
Packing list
Operation instruction
Wireless charging operation: The power bank comes with an auto-wake function
for wireless charging.When it detects any phone placed on, it will
automatically start charging.Due to compatibility issues,certain smart phones
need to press power button to turn
on the power output function.The wireless charging mobile phone should be
placed in the wireless charging area of the product (as shown in the picture)
for wireless charging.The wireless charging distance is within 5mm.If the
distance exceeds 5mm, the wireless charging can not function.Please adjust the
wireless charging distance within the wireless charging range.
Important safety instructions
- Please fully charge the power bank when using it for the first time.
- If this product is not used for long periods of time, you should charge and discharge it once every three months.
- Please choose an appropriate charger for recharging this product and suitable cables when charging other devices.
- Please ensure some supervision is in progress when recharging this product,Do not charge this product without any care.
- Using ambient temperature: 0°C to 25°C, non-tropical areaStorage ambient temperature: OT to 40°C.
- Do not leave this product in the car. The high temperature of sunlight will damage the product.
- Please place this product in areas that are not easily accessible by children.Do not allow children to operate this product,or accidents may occur.
- If this product suffers from deformation,leakage or radical decline in performance,please stop using this product.
- This product can not be disassembled,applied pressure, pierced,short-circuited,immersed in liquid disposed of in a fire,or exposed to a high temperature or heat source with a temperature greater than 140°F (60°C).
- This product contains lithium batteries,Do not disassemble it!Or danger or battery damage may occur.
- This product subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.
It is hereby declared that this product model of JOYROOM, complies with the
provisions of Directive 2014/53/EU and Directive 2011/65/EU The full text of
the EC Declaration of Conformity can be found on the following website:
https://Awwwjoyroom.com
This equipment complies with the provisions of Directive 2012/19/EU and
2006/66/EU.
It is strictly forbidden to dispose of this equipment with ordinary trash. It
must be recycled.
This symbol indicates that the product shall not be treated as regular
domestic trash, and must be delivered to a recycling center that is capable of
recycling electronic and electrical equipment.
Warranty Card
User Name:
User Tel:
User address (with postcode):
Purchase date:
Invoice No.:
Dealer Name:
Dealer Tel:
Dealer Address (with postcode):
Warranty service instructions
A. If there is performance failure on this product and it’s not caused by
human error, we will provide a 36-month free warranty service for consumers
from the date of purchase.
B. Warranty exceptions:
- Human damage:
- Expired the warranty period;
- Failure to provide valid purchase proof:
- Product damage caused by failure to follow the use. maintenance and care instructions;
- Product damage caused by disassembling or repairing the product without authorization, or immersing it in water;
- Damage caused by force majeure.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
“The FCC certification of this device refers to RF exposure testing performed in typical operating conditions, where a person is no closer than 0cm centimeters from the device surface at all times, except for non-repetitive patterns with transient time intervals in the order of a second. Only in the stated conditions, the device is shown to fully comply with the FCC RF Exposure requirements of KDB 447498.”
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>