MoTrade RX400 Carplay Android Auto interface Installation Guide
- August 22, 2024
- MoTrade
Table of Contents
MoTrade RX400 Carplay Android Auto interface
The interface is connected via a connection plug on the radio and a video cable on the display. It is estimated to take 30-45 minutes of work to connect the interface. No programming is required.
Specifications
- Product Name: Carplay Android Auto Interface LEXUS RX400 LEX4/LEX5
- Connection: Radio connection plug and video cable on display
- Estimated Installation Time: 30-45 minutes
- Programming: No programming is required
Step 1: Remove the Gear Lever Cover Plate
Unclip the gear lever cover plate, lift and loosen the cover panel, and unscrew the gear lever.
Step 2: Remove the Panel Underneath the Radio (unclip)
Pull the panel underneath the radio forward and out.
Step 3: Remove the Radio
The radio is fastened on both sides with 4x 10 mm bolts (2 left and 2 right). Be careful not to let the bolts fall (the use of a magnetic socket wrench is recommended).
Step 4: Remove the Display
The screen is secured with 2x 10mm bolts. Unscrew these bolts to remove the display. This manual has been compiled based on experience. The screen is secured with 2x 10 mm bolts. For improvement suggestions, please contact motrade@kpnmail.nl
Step 5. Connect the plugs and the microphone to the interface
Make sure that the video cable does not kink at the connection point on the
interface.
Step 6. Test the system
Plug in the interface. Choose a CD to switch from the radio to the Vline.
Remove and forget the existing bluetooth connection to the car. Connect the
phone to the bluetooth signal of the interface and turn on WIFI. Test the
system concerning graphics, sound, radio and interface switching, and reverse.
Step 7. Seal the system
Reconnect all parts in reverse order. Place the microphone near the interior
rearview mirror. Smooth out the deed in the seams.
Step 8. Have fun!
This manual has been compiled based on experience and with due care. No
rights can be derived from it. Improvement tips/tricks are of course always
welcome! (motrade@kpnmail.nl)
FAQs
Q: Is any programming required for the Carplay Android Auto interface?
A: No programming is required for this interface.
Q: How long does it take to connect the interface?
A: It is estimated to take between 30-45 minutes to connect the interface.