SprintRay SRE-1000737 EU Castable Instructions
- June 10, 2024
- SprintRay
Table of Contents
SRE-1000737 EU Castable
SprintRay EU Castable Instruction for Use
Product Information
SprintRay EU Castable is a resin designed for the generative production of
dental cast forms based on image projection systems. The material consists of
functional (meth)acrylic resins and is available in 1 kg packaging. The
product has a flexural strain (at break) of approximately 5% (ISO 48-4), a
viscosity of approximately 85, and a density of approximately 0.3.
The product requires the following software and hardware:
- Software: RayWare (CAD)
- Hardware: Pro Desktop 3D (3D Printing), Pro Wash / Dry (Cleaning), ProCure (Post Curing)
The product is manufactured by SprintRay, Inc. located at 3577 North Figueroa St., Los Angeles, CA 90065. The lot number and best before date are indicated on each packaging. The product should not be used after the expiration date and must be disposed of according to official regulations.
Product Usage Instructions
- Ensure that the required software and hardware are available and properly set up.
- Follow the software design specifications for geometric presetting.
- Prepare the material according to the manufacturer’s instructions.
- Load the material into the Pro Desktop 3D printer and start the printing process.
- After printing, clean the cast form using the Pro Wash / Dry system.
- Post-cure the cast form using the ProCure system.
- If necessary, build up the material or repair using LCR-1 gel.
- Handle the polymerized resins with care to avoid skin or eye contact. In case of accidental contact, rinse with running water and consult a doctor if necessary.
It is important to note that SprintRay EU Castable is contraindicated for any application that is not part of the indication listed in the user manual. The product may cause skin, eye, or respiratory irritation and should be kept away from sunlight. Please refer to the user manual for further information and instructions.
Indication
SprintRay EU Castable is a resin for the generative production of dental
castforms based on image projection systems.
Contraindication
SprintRay EU Castable is contraindicated for every application that is not
part of the indication (see above).
Requirements
Software:
- RayWare (CAD)
Hardware:
- Pro Desktop 3D (3D Printing)
- Pro Wash / Dry (Cleaning)
- ProCure (Post Curing)
SprintRay, Inc., 3577 North Figueroa St., Los Angeles, CA 90065
Material
SprintRay EU Castable consists of functional (meth)acrylic resins.
Geometric presetting
According to the software design specifi cations.
Material parameters
Radiation penetration depth controllable by exposure time 25 μm 50 μm 100 µm
Manufacturing process (fi g. 1-10)
-
Prepare data (RayWare).
-
Choose process parameters (build style, etc.).
-
Transfer prepared data to 3D printing device.
-
Prepare 3D printing – shake bottle.
-
Fill resin tank of 3D printing device.
-
Build the parts.
-
Clean parts (ProWash / Dry): 5 min. / 5 min.
-
Dry parts (ProWash / Dry): 3 min.
-
Post curing (ProCure): 5 min. / 60 °C.
-
Finish parts.
Finishing processes
Build up of material or repair possible with LCR-1 gel.
Notice
Please follow the instructions provided by the software manufacturer in terms
of parameter settings and design re-commendations. Please follow the
instructions provided by the hardware manufacturer in terms of parameter
settings/printing & post curing recommendations. To avoid detrimental effects
on material quality do not expose the liquid material to irradiation under any
circumstances. Deviations from the described manufacturing processes or
storing conditions may lead to different mechanical and optical properties of
the material. Ensure personal protective gear during processing.
Caution: Polymerized resins are chemically resistant – avoid stains on clothing! Avoid any contact with skin and eyes! In case of accidental contact, rinse with adequate running water, consult a doctor if necessary. The lot number and the best be-fore date are indicated on each packaging. In case of claims please always indicate the lot number of the product. Do not use the product after expiry of the best before date. Dispose of contents/container according to offi cial regulations.
Hazard statements
Causes skin irritation. May cause an allergic skin reaction. Causes serious
eye irritation. May cause respiratory irritation. May cause long lasting
harmful effects to aquatic life.
SprintRay EU Castable
-
Flexural stress
MPa (ISO 178): ≥ 80 -
Flexural strain (at break)
(ISO 178): ca. 5 %** -
Shore hardness
(ISO 48-4): ca. 85** -
Viscosity
(DIN 53019-1): ca. 0.3**
Ordering information
SprintRay EU Castable
1 kg: ≤ 405 nm
red
REF: SRE-1000737
This side up.
Temperature limit
Warning
Do not use if package is damaged.
Consult instructions for use.
Keep away from sunlight.
Use by date
Catalogue number
Lot number
Date of manufacture
Manufacturer:
pro3dure medical GmbH
Am Burgberg 13 · 58642 Iserlohn, Germany
Phone: +49 (0)2374 920050-0
Fax +49 (0)2374 920050-50
info@pro3dure.com ·
www.pro3dure.com · Made in Germany
Distributor:
SprintRay Europe GmbH
Brunnenweg 11 · 64331 Weiterstadt · Germany
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>