hama 00186363 Thermometer-Hygrometer Instruction Manual

: June 9, 2024
: Hama

Table of Contents

hama 00186363 Thermometer-Hygrometer
Operating instruction
Safety Notes
Installation
Operation
Warranty Disclaimer
Care and Maintenance
Technical Data
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

hama 00186363 Thermometer-Hygrometer

Operating instruction

Controls and Displays

°C/°F-button = toggles between °C and °F
MAX/MIN button = recalls the stored maximum/minimum values

Safety Notes

The product is intended for private, noncommercialuse only.
Do not operate the product outside the power limits given in the specifications.
Do not use the product in moist environments and avoid splashes.
Do not drop the product and do not expose it to any major shocks.
Dispose of packaging material immediately according to locally applicable regulations.
Do not modify the product in any way.
Doing so voids the warranty.
Protect the product from dirt, moisture and overheating, and only use it in a dry environment.
Do not use the product in the immediate vicinity of heaters or other heat sources or in direct sunlight.
Do not use the product in areas where the use of electronic devices is not permitted.
Keep the packaging material out of the reach of children due to the risk of suffocation.
Do not open the device or continue to operate it if it becomes damaged.
Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
Keep this product, as all electrical products, out of the reach of children!
Use the item only in moderate climatic conditions.

Warning – Batteries

When inserting batteries, note the correct polarity (+ and – markings) and insert the batteries accordingly. Failure to do so could result in the batteries leaking or exploding.
Only use batteries (or rechargeable batteries) that match the specified type.
Before you insert the batteries, clean the battery contacts and the polar contacts.
Do not allow children to change batteries without supervision.
Do not mix old and new batteries or batteries of a different type or make.
Remove the batteries from products that are not being used for an extended period (unless these are being kept ready for an emergency).
Do not short-circuit batteries.
Do not charge batteries.
Do not throw batteries in a fire.
Keep batteries out of the reach of children.
Never open, damage or swallow batteries or allow them to enter the environment. They can contain toxic, environmentally harmful heavy metals.
Immediately remove and dispose of dead batteries from the product.
Avoid storing, charging or using the device in extreme temperatures and extremely low atmospheric pressure (for example, at high altitudes).

Warning – Button cells

Do not ingest battery, risk of burns due to dangerous substances.
This product contains button cells. If swallowed, the button cell can cause severe internal burns within just two hours and lead to death.
Keep new and used batteries out of the reach of children.
If the battery compartment does not close securely, stop using the product and keep it out of the reach of children.
If you think that batteries were swallowed or are in a part of the body, seek medical assistance immediately.

Inserting/changing batteries

Pull the battery compartment out by the notch. Remove the contact breaker.
Remove the spent battery and insert a new CR2025 button cell, observing polarity.
Slide the battery compartment back in.

Installation

You can either stand the thermometer/ hygrometer on an even surface using the hook on the back of the device, or attach it to a wall using the hook on the back of the device.
Install an anchor, screw, nail, etc. in the wall of your choice.

Warning – Batteries
Before mounting, check that the wall you have chosen is suitable for the weight to be mounted Also make sure that there are no electric, water, gas or other lines running through the wall at the mounting site.

Operation

After inserting a battery, all of the segments of the display will flash briefly.
The thermometer/hygrometer is now ready for use.
After calibration, the measured value on the left indicates the temperature, the measured value on the right the humidity.
If the measured value is outside of the measuring range, LL (value lower than minimum) or HH (value higher than maximum) will appear on the temperature display.
Once the elements on the display begin to dim, replace the batteries as described in 2. Inserting/changing batteries.

Celsius / Fahrenheit

Press the °C/°F button to switch between °C and °F for the temperature display.

Maximum and minimum temperature and humidity values

The thermometer/hygrometer automatically stores the maximum and minimum temperature and humidity values.
Repeatedly press the MAX/MIN button to switch between the current temperature and humidity, minimum temperature and humidity (MIN) and maximum temperature and humidity (MAX).
The maximum and minimum values are automatically deleted every 24 hours.

Warranty Disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/ mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes

Care and Maintenance

Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents.
Make sure that water does not get into the product.