LIFE Rainforest Weather Station with Wireless Outdoor Sensor and Clock User Manual

LIFE Rainforest Weather Station with Wireless Outdoor Sensor and Clock

Weather station with wireless outdoor sensor and clock with alarm function

PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS.
Read the operating instructions carefully before putting the appliance into operation and keep the instructions, the receipt and, if possible, the box with the internal packing. If you give this device to other people, please also pass on the operating instructions.

USER MANUAL SYMBOLS
Important information for your safety is specially marked. It is essential to comply with these instructions in order to avoid accidents and prevent damage to the machine:

WARNING: This sign warns you of dangers to your health and indicates possible injury risks.
CAUTION: This sign refers to possible hazards to the machine or other objects.
NOTE: This sign highlights tips and information

SAFETY INSTRUCTIONS

The device must be used with due care and you must follow the basic safety instructions as follows:

1. Keep it the device away from sources of heat, direct sunlight, humidity (never dip it into any liquid) and sharp edges.
2. Do not immerse the device in water or any other liquid.
3. The device is designed exclusively for private, domestic use and for the envisaged purpose.
4. This device is not suitable for commercial use.
5. To ensure the safety of your children, please keep away from all packaging materials such as plastic bags, boxes, foil etc.
6. CAUTION: Do not allow babies and young children to play with the packaging materials. Risk of suffocation!
7. If you do not intend to use the device for a long time, remove the battery before storage to avoid a fluid leakage.

FEATURES

Weather station with wireless outdoor temperature measurement unit

1. Indoor and outdoor thermometer
2. Indoor temperature measuring ranges: 0°C (32° F) ~ 50°C (122° F)
3. Outdoor temperature measuring ranges: -20°C (-4° F) ~ 60°C (140° F)
4. Indoor and outdoor hygrometer: measuring ranges 20% – 95% RH
5. Display lowest / highest outdoor temperature and humidity records (Lo / Hi)
6. Display temperature and humidity trend
7. Barometric pressure measuring ranges: 600 hPa/mb~ll00 hPa/mb (17.72 inHg~32.50 inHg & 450.0mmHg~825.0mmHg)
8. Display records of the barometric pressure in the past 12 hours
9. Display barometric pressure trend
10. Weather forecast and display with 7 icons: Sunny, Partly cloudy, Cloudy, Rainy, Heavy rainy, Snowy,Heavy Snowy
11. Temperature measurement unit: °C or ° F
12. Barometric pressure measurement unit: hPa/mb or mmHg or inHg
13. Frost alert
14. Lunar phases display
15. Digital clock display (12/24h)
16. Date and weekday display ( 8 languages available: English, German, Italian, French, Russian, Spanish, Netherlands and Danish)
17. Alarm and snooze function
18. LCD display with LED backlight
19. Dimensions: 164.5 x 124 x 53mm
20. Power supply: included adapter DC SV 200 mAh or 2 x AA (not incl.)

Wireless remote outdoor sensor

1. Transmission frequency: 433.92MHz
2. Range of transmission: max. 60m (200ft)
3. Easy to install with practical stand support or wall-mounted
4. Dimensions: 97 x 50 x 32mm
5. Power supply: 2 x AA (not incl.)

WEATHER STATION DISPLAY

Part A- LCD Display

• A1: Time
• A2: Weekday
• A3: Date
• A4: Outdoor Temperature display
• AS: Alarm icon
• A6: Indoor sensor icon
• A7: Outdoor sensor icon
• AS: Indoor Temperature display
• A9: Indoor minimum/maximum temperature display AlO: Indoor Humidity display
• A11: Indoor minimum/maximum humidity display

• A12: Barometric pressure display
• A13: Records of the barometric pressure for the past 12 hours
• A14: Lunar phases
• A15: Outdoor humidity display
• A16: Outdoor minimum/maximum humidity display
• A17: Frost alert icon
• A18: Outdoor minimum/maximum temperature display
• A19: Outdoor temperature alert icon

Part B – Buttons ( rear side) and power supply

• Bl: “SNOOZE/LIGHT” button
• B2: “ALERT” button
• B3: “RESET” button
• B4: “ALARM” button
• BS: “+” button
• B6: “MODE” button
• B7: DC-POWER input
• B8: “-” button
• B9: Battery compartment

Part C -Wireless Outdoor Sensor:

• Cl: LCD display – Outdoor temperature
• C2: LCD display – RF icon
• C3: LCD display – Outdoor humidity
• C4: Indicate LED light for RF
• C5: ‘”‘C./°F” button
• C6: “TX” button
• C7: Battery compartment

BATTERY INSTALLATION

1. Open the battery compartment cover at the wireless outdoor sensor.
2. Insert the batteries with the right polarity [“+”and” -“]
3. Connect the included power supply to the weather station. When you connect the power supply to the mains all the icons on the LCD display will briefly light up for 3 seconds, and you will hear a beep tone, detecting indoor temperature & humidity.
4. The weather station will now start the connection with the wireless outdoor sensor. This operation lasts approximately for 3 minutes. An icon of a RF antenna will flash on the “outdoor sensor icon” of the receiver.

SETTING TIME

1. Press and hold the “MODE” button for 2 seconds and the 12/24 hour mode display will start to flash. Now use”+” and”-” buttons to set the correct 12/24 hour mode. Press the “MODE” button to confirm your setting.
2. The temperature display (°C) will start to flash. Now use”+” and”-” buttons to set the temperature unit in °C or ° F. Press the “MODE” button to confirm your setting
3.  The barometric pressure display (mb/hPa) will start to flash. Now use”+” and”-” buttons to set the pressure unit in mb/hPa or inHg or mmHg. Press the “MODE” button to confirm your setting.
4.  The hour display will start to flash. Now use”+” and”-” buttons to set the correct hour. Press the “MODE” button to confirm your setting.
5. The minutes display will start to flash. Now use”+” and”-” buttons to set the correct minutes. Press the “MODE” button to confirm your setting.
6. The month and date display will start to flash. Now use”+” and”-” buttons to set the date display either on Month/Date or Date/Month. Press the “MODE” button to confirm your setting.
7. The year display will start to flash. Now use”+” and”-” buttons to set the correct year. Press the “MODE” button to confirm your setting.
8. The month display will start to flash. Now use”+” and”-” buttons to set the correct month. Press the “MODE” button to confirm your setting.
9. The date display will start to flash. Now use”+” and”-” buttons to set the correct date. Press the “MODE” button to confirm your setting.
10. The language selection for the weekday display will start to flash. Now use”+” and”-” buttons to select a language (advise below table). Press the “MODE” button to confirm your setting. The setting procedures just finish and entering the clock mode .

NOTE: After 20 seconds without pressing any button, the clock switches automatically from “Set” mode to “Normal Time” mode.

SETTING DAILY ALARM

1. Press once the “ALARM” button, LCD display shows the “ ” icon, indicating the activation/deactivation of the alarm function.
2. Press and hold the “ALARM” button for 2 seconds until the hour display of the alarm time starts to flash. Use the”+” and”-” buttons to set the required hour. Press the “ALARM” button to confirm your setting.
3. The minute display of the alarm time starts to flash. Use the”+” and”-” buttons to set the required minutes. Press the “ALARM” button to confirm your setting. The setting procedures just finish and entering the clock mode .

NOTE:

1. After 20 seconds without pressing any button, the clock switches automatically from “Set” mode to “Normal Time” mode.
2. The alarm will ring for 2 minutes if you do not deactivate it by pressing any button. If you don’t deactivate it by pressing any button the alarm will be repeated automatically after 24 hours.
3. The alarm (crescendo, duration: 2 minutes) rises its volume 4 times while it rings.

SWITCHING OFF THE ALARM:
Press any button except the “SNOOZE/LIGHT” button to stop the alarm’s ringing. It is not necessary to reactivate the alarm. The alarm time switches automatically the next day same time.

AUTOMATIC SNOOZE FUNCTION:
Press the “SNOOZE/LIGHT” button while the alarm is ringing to activate the SNOOZE mode.
The alarm will ring again after 5 minutes.

LUNAR PHASES

1. The weather station displays automatically the current lunar phase.

TEMPERATURE/HUMIDITY/ BAROMETRIC PRESSURE AND TEMPERATURE/HUMIDITY TREND DISPLAY

1. The current indoor temperature/humidity/barometric pressure and the temperature/humidity indoor trend are shown in the LCD display.
2. After successfully connecting with the outdoor sensor, the weather station can display the outdoor temperature/humidity and the outdoor temperature/humidity trend.
3. You may see the following displays:

RF TRANSMISSION PROCEDURE:

1. The outdoor sensor will automatically transmit temperature and humidity signal to the weather station after the batteries are inserted.
2. If the weather station fails to receive transmission from the outdoor sensor(“- -“display on the LCD),press and hold the”-” button for 3 seconds to receive transmission manually. RF icon” “will flash on

MINIMUM/MAXIMUM TEMPERATURE/HUMIDITY DISPLAYS

1. When the indoor / outdoor temperature and humidity are shown in the LCD display,temperature/humidity maximum/minimum, are also recorded at the same time. The LCD display shows maximum (Hi) and minimum (Lo) records for indoor / outdoor temperature and humidity.
2. The maximum/minimum temperature and humidity daily records starts at 00:00 (automatic clearance) .

NOTE

• If the temperature is below ranges “LL.L” will be displayed. If the temperature is above ranges “HH.H” will be displayed.
• If the barometric pressure is below ranges “LLLL” will be displayed. If the barometric pressure is above ranges “HHHH” will be displayed.

OUTDOOR TEMPERATURE ALERT SETTING

1. Press and hold the “ALERT” button for 2 seconds until the icon for the “Temperature Alert” starts to flash.
2. The icon of maximum limit of the Temperature alarm will start to flash. Use the”+” and”-” buttons to set the maximum temperature. Press “ALERT” button to confirm your setting.
3. The icon of the minimum limit of the Temperature alarm will start to flash. Use the”+” and”-” buttons to set the minimum temperature. Press “ALERT” button to confirm your setting and finish the setting procedure.

TEMPERATURE AND FROST ALERT

1. To activation/ deactivation the temperature alert or frost alert briefly press the “ALERT” button.

2. If the frost alert is activated the matching icon (Al 7) displays next to the outdoor temperature. The alarm signal sounds at -1 “C to+ 3 “C (or +30°F to+ 37°F).
   If the temperature alarm is activated the matching icon (A19) displays next to the outdoor temperature. The alarm signal rings at the adjusted values.

3. If the temperature and frost alarm are activated, both icons display ( A17 and A19) .
   NOTE: If the temperature is below measuring ranges “LL .L” will be displayed. If the temperature is above measuring ranges “HH.H” will be displayed.

BAROMETRIC PRESSURE OF THE LAST 12 HOURS:
Press the”+” button repeatedly to see the barometric pressure values of the last 12 hours.

• OHR = present barometric pressure
• lHR = barometric pressure one hour earlier
• 2HR = barometric pressure two hours earlier, etc .

NOTE:

1. After 20 seconds without pressing any button the clock switches automatically from setting mode to present barometric pressure.
2. The weather station can display the barometric pressure trend.
3. You may see the following displays:

WEATHER FORECAST

1. The weather station displays the following weather symbols:

2. he weather symbols indicate the weather forecast over the next eight hours and not the current weather conditions .

NOTE:

• Please note the weather forecast from your local weather forecasting service into account as well as the forecast from your weather station. If there are discrepancies between the information from your device and from the local weather forecasting service, please take the advice of the latter as authoritative.
• The weather forecast is based on the evaluation of fluctuations in the barometric pressure and may deviate from the actual weather conditions.

BACKLIGHT

1. When you use the device with the power supply, press “SNOOZE/LIGHT” button to choose off/ low/high backlight brightness.
2. When the device is battery-powered, press the “SNOOZE/LIGHT” button and the backlight will light up for 15 seconds.

CLEANING AND CARE

1. Never immerse device in water or in any other liquid.
2. Wipe the housing and the screen of the device with a soft cloth.

STORAGE

1. Always store the device in a safe and clean place. For the better protection of the device, store it in its original packaging.
2. If you do not intend to use the device for a long time, remove the battery before storing it to prevent leakage of the battery fluid.

DECLARATION OF CONFORMITY

Hereby, SUN SA declares that the radio equipment type LIFE RAINFOREST is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.sun.gr

DISPOSAL OF APPLIANCE AND ACCESSORIES

This symbol appearing on the product, its accessories or accompanying manuals indicates that the product and its electronic accessories should not be disposed of with other household trash. In order to avoid possible harmful effects on the environment or health due to uncontrolled waste disposal, please separate these products from other types of waste and recycle them.
Household users should contact either the store where they purchased this product or their local services for details of where and how they can return these products for environmentally safe recycling.

DISPOSAL OF BATTERIES
This marking on the battery, manual or packaging indicates that the batteries of this product should not be disposed of with other household waste at the end of their life cycle.

Iwviac; Ka>-oxwp1, 570 09 0EOOOAOViKrJ, EMMa, THA. +30 2310 700.777 Ionias Kalochori, 570 09 Thessaloniki, Greece, TEL. +30 2310 700.777
e-mail: info@sun.gr
www.life.gr

Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>