Marshall CV-H20-HFL Compact Weatherproof Camera Housing with Fan and Heater User Manual
- June 3, 2024
- Marshall
Table of Contents
Marshall CV-H20-HFL Compact Weatherproof Camera Housing with Fan and
Heater
Safe Use of Equipment
WARNING
To reduce the risks of an electric shock, do not expose inside of this unit to
rain or moisture. Installation on a rainy day may also cause fog around the
capsule.
Installation
Installation shall be done by qualified installer only and should conform to
all local codes.
Ensuring strength of supporting Housing Unit
The unit must be properly and securely mounted to a supporting structure
capable of sustaining the weight of the unit. Recommend using 3/8” stainless
screws x four (4).
Prohibit changes or modifications of equipment
You are cautioned that any changes or modifications not expressly approved in
these instructions could void your authority to operate this equipment.
Basic Operating Environment Condition
We provide warranty for the products that are installed under normal outdoor
-20°C ~ +50°C conditions. We are unable to provide warranty for the products
which are installed indoors and exposed to constant high temperature over
+50°C and over 90% humidity. Operating temperature and humidity of camera
varies from camera to camera. You are requested to conform to camera
specifications with camera manufacturer and housing specifications in advance.
i.e. -20°C or below, you are requested to use additional heater and +50°C or
above you are requested to use two blowers and Sunshield.
Fasten wires tightly. Attention:
Keep wires away from the Fan / Heater, and do not disturb Fan/Heater’s
performance.
CV-H20-HFL Installation
WARNING
The unit must be properly and securely mounted to a supporting structure
capable of sustaining the weight of unit. Using stainless screws is
recommended.
Cables
Component Parts for Assembly
Cable Assembly
- AC 24V OUT (Internal cable connected)
- AC 24V HEATER
- AC 24V IN (Internal cable connected)
- AC 24V POWER IN
- DC 12V FAN
- DC 12V OUT
- AC 24V OUT
Dimensions
Top view of the camera outdoor housing dimension
IMPORTANT SAFEGUARDS
- Read Instructions – All the safety and operating instructions should be read before operating the unit.
- Retain Instructions – The safety and operating instructions should be retained for future reference.
- Heed Warnings – All warnings on the unit and in the operating instructions should be adhered to.
- Follow Instructions – All operating user instructions should be followed.
- Electrical Connections – Only a qualified electrician should make the electrical connections.
- Attachments – Do not use attachments not recommended by the product manufacturer as they may cause hazards.
- Cable Runs – All cable runs must be within permissible distance.
- Mounting – This unit must be properly and securely mounted to a supporting structure capable of sustaining the weight of the unit. Accordingly:
- The installation should be made by qualified installer.
- The installation should be in compliance with local codes.
- Care should be exercised to select suitable hardware to install the unit, taking into account both the composition of the mounting surface and the weight of the unit. Be sure to periodically examine the unit and the supporting structure to make sure that the integrity of the installation is intact. Failure to comply with the foregoing could result in the unit separating from the support structure and falling, with resultant damages or injury to anyone or anything struck by the falling unit.
SAFETY PRECAUTIONS
CAUTION
TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT EXPOSE COMPONENTS TO WATER
OR MOISTURE.
- The lightning flash with an arrow-head symbol, within an equilateral triangle, is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
- The exclamation point within an equilateral triangle is intended to alert the user to presence of im-portant operating and maintenance (servicing) instructions in the litera-ture accompanying the appliance.
UNPACKING
Unpack carefully. Electric components can be damaged if improperly
handled or dropped. If any of the products appears to have been damaged during
the shipment, replace it properly in its carton and notify the shipper.
Be sure to save:
- The shipping carton and packaging material. They are the safest material in which to make future shipments of the equipment
- The Installation and Operating Instructions.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>