Marshall 1001908 Emberton Portable Bluetooth Speaker User Manual
- May 15, 2024
- Marshall
Table of Contents
Marshall 1001908 Emberton Portable Bluetooth Speaker
Product Information
- Specifications:
- Control Knob Functions: Power On/Off, Play/Pause, Skip Forward/Back, Fast Forward/Rewind, Volume Control
- Battery Indicator: 10-segment display
- USB Port: For charging the speaker
Product Usage Instructions
- Power On/Off
- Press and hold the control knob for 2 seconds to power on/off the speaker.
- Play/Pause
- Push the control knob once to play or pause the audio.
- Skip Forward/Back
- Push the control knob to the right or left to skip forward or back in the tracklist.
- Fast Forward/Rewind
- Push and hold the control knob to the right or left for fast-forward or rewind functionality.
- Volume Control
- To adjust the volume, push the control knob upwards or downwards.
- Charging the Battery:
- Connect the speaker to a power source using the provided USB cable. The battery indicator will stop blinking when fully charged.
- Getting Started:
- Push and hold the control knob for 2 seconds to turn on the speaker and enter pairing mode.
- Select “EMBERTON” from your audio device’s Bluetooth list to pair with the speaker.
FAQs
- Q: How do I know when the battery is fully charged?
- A: The battery indicator will stop blinking when the battery is fully charged.
PRODUCT FEATURES
DEVICE LAYOUT
- CONTROL KNOB
- POWER ON/OFF
* Push and hold for 2 seconds
2. **PLAY/PAUSE**
* Push once
3. **SKIP FORWARD/BACK**
* Push to the right or the left
4. **FAST FORWARD/REWIND**
* Push to the right or left and hold
5. **TURN UP/DOWN THE VOLUME**
* Push upwards or downwards- BLUETOOTH® PAIRING BUTTON AND INDICATOR
- Push the Bluetooth® button until the indicator above starts blinking to initiate Bluetooth pairing mode.
- BATTERY INDICATOR
- The 10-segment battery indicator shows the battery charge.
- USB PORT FOR CHARGING
- Connect the speaker to a power source via the included USB cable to charge the battery.
- The battery is fully charged when the battery indicator stops blinking.
GETTING STARTED
- Push the control knob for 2 seconds. The speaker turns on and is in pairing mode.
- Select EMBERTON from your audio device’s Bluetooth list.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>