beko BDPB8010W Heat Pump Tumble Dryer User Manual
- August 21, 2024
- Beko
Table of Contents
BDPB8010W Heat Pump Tumble Dryer
“`html
Specifications
- Model: BDPB8010W
- Language: English (EN)
- Manufacturing Number: 2960313875_EN/080124.1117
Product Information
The Dryer is a modern appliance designed to efficiently dry
clothes using the latest environmentally friendly technology. It
comes with safety features to ensure user protection and has been
manufactured in compliance with national environmental
legislation.
Safety Instructions
1.1 Intended Use
Follow the user manual for the correct usage of the dryer.
1.2 Safety of Children, Vulnerable Persons, and Pets
Keep the dryer out of reach of children, vulnerable persons, and
pets to prevent accidents.
1.3 Electrical Safety
Ensure proper electrical connections and avoid contact with
water to prevent electric shock.
1.4 Transporting Safety
Handle the dryer carefully during transportation to prevent
damage.
1.5 Installing Safety
Follow the installation instructions carefully and use suitable
stacking tables for washing machines and dryers for safe setup.
1.6 Usage Safety
Operate the dryer following the safety guidelines provided in
the manual.
1.7 Maintenance and Cleaning Safety
Regularly clean and maintain the dryer according to the
instructions to ensure safe operation.
1.8 Lighting Safety
Avoid looking directly at the UV radiation emitted by the dryer
to prevent harm.
Environmental Instructions
The dryer complies with WEEE Regulations and waste disposal
guidelines. It is made from recyclable and reusable materials,
ensuring environmental sustainability.
FAQ
Q: Is the dryer safe for children?
A: The dryer has safety features to prevent accidents involving
children. However, it is recommended to keep children away from the
appliance during operation.
Q: How should I clean the dryer?
A: Follow the maintenance and cleaning instructions provided in
the manual to ensure safe and effective cleaning of the dryer.
“`
Dryer
User Manual
BDPB8010W
EN
2960313875_EN/080124.1117
Dear Customer, Please read this guide prior to use this product! Thank you for
choosing Beko product. We would like you to achieve the optimal efficiency
from this high quality product which has been manufactured with state of the
art technology. Please make sure you read and understand this guide and
supplementary documentation fully before use. Observe all warnings and
information herein. Therefore you can protect both yourself and your product
against potential damages. Keep the manual. Include this guide with the unit
if you hand it over to someone else. Symbols and Remarks The following symbols
are used in the user guide:
Danger that may cause death or injury
Read the manual
Important information or useful usage tips
Warning against hot surfaces
B Warning against electric shock
Warning against UV Radiation hazard
Warning against scalding The product’s packaging is made of recyclable
materials, in accordance with the National Environment Legislation.
Warning against fire
NOTICE Danger that may cause material damage on the product or surrounding
area
This product was manufactured using the latest technology in environmentally
friendly conditions
1 Safety Instructions ………………………………………………………………………. 5
1.1 Intended use …………………………………………………………………………………………..5 1.2 Safety of children,
vulnerable persons and pets …………………………………………….5 1.3 Electrical Safety
……………………………………………………………………………………….6 1.4 Transporting safety
…………………………………………………………………………………..6 1.5 Installing safety
………………………………………………………………………………………..7 1.6 Usage safety
…………………………………………………………………………………………..8 1.7 Maintenance and cleaning safety
………………………………………………………………10 1.8 Lighting safety
……………………………………………………………………………………….10
2 Environmental instructions………………………………………………………….. 11
2.1 Compliance with the WEEE Regulations and Waste Disposal ………………………..11 2.2
Packaging information …………………………………………………………………………….11 2.3 Standard conformity
and test information / EU declaration of conformity …………11
3 Your drying machine …………………………………………………………………… 12
3.1 Technical specifications …………………………………………………………………………..12 3.2 General
appearance ……………………………………………………………………………….13 3.3 Scope of delivery
……………………………………………………………………………………13
4 Installation………………………………………………………………………………….. 14
4.1 Right place for installation ………………………………………………………………………..14 4.2 Removing
the shipping safety group ………………………………………………………….14 4.3 Water connection
…………………………………………………………………………………..15 4.4 Adjusting the stands
……………………………………………………………………………….15 4.5 Moving the drying
machine………………………………………………………………………15 4.6 Warning regarding the noise
…………………………………………………………………….15 4.7 Replacing the lighting
bulb……………………………………………………………………….15
5 Preparation ………………………………………………………………………………… 16
5.1 Laundry suitable for drying in drying machine ……………………………………………..16 5.2
Laundry not suitable for drying in drying machine ………………………………………..16 5.3
Preparing the laundry to be dried………………………………………………………………16 5.4 What to do for
energy saving ……………………………………………………………………16 5.5 Correct load capacity
……………………………………………………………………………..17
6 Running the product ………………………………………………………………….. 18
6.1 Control Panel…………………………………………………………………………………………18 6.2 Symbols
……………………………………………………………………………………………….18 6.3 Preparation of drying machine
………………………………………………………………….19 6.4 Program selection and consumption
chart………………………………………………….20 6.5 Auxiliary functions
…………………………………………………………………………………..22 6.6 Warning
indicators………………………………………………………………………………….22 6.7 Starting the
program……………………………………………………………………………….23 6.8 Child Lock
…………………………………………………………………………………………….23 6.9 Changing the program after it is
started ……………………………………………………..23 6.10 Cancelling the
program………………………………………………………………………….24 6.11 End of program
……………………………………………………………………………………24 6.12 Odour feature
………………………………………………………………………………………24
7 Maintenance and cleaning ………………………………………………………….. 25
7.1 Lint filters (internal and external filters) / Cleaning of the Interior
Surface of the Loading Door ……………………………………………………………………………………………..25 7.2
Cleaning the sensor ……………………………………………………………………………….26 7.3 Emptying the water
tank ………………………………………………………………………….27 7.4 Cleaning the
condenser…………………………………………………………………………..27
8 Troubleshooting …………………………………………………………………………. 29
1 Safety Instructions
This section includes the safety instructions necessary to prevent the risk of
personal injury or material damage. · Our company shall not be held
responsible for damages that may occur if
these instructions are not observed. · Installation and repair operations
shall always be performed by Authorized
Service. · Use original spare parts and accessories only. · Do not repair or
replace any component of the product unless it is clearly
specified in the operation manual. · Do not modify the product.
1.1 Intended use
· Product is designed only for household use. It is not intended for
commercial use.
· The product is not designed for outdoor use. · Do not install or operate the
product where freezing is a possibility and/or
vulnerable to external elements. Water frozen in the pump or the hoses may
cause damages · Product can only be used to dry and ventilate laundry which
are washed with water and drying machine safe.
1.2 Safety of children, vulnerable persons and pets
· This product may be used by children aged 8 years and older and persons with
underdeveloped physical, sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or instruction concerning
use of the appliance in a the product safe way and the hazards involved.
Children should not tamper with the device. Cleaning and maintenance should
not be carried out by children unless they are supervised.
· Children under 3 years old shall be kept away from the product unless
supervised.
· Electrical products are dangerous for children and pets. Children and pets
shall not play with the product, climb on or get inside the product.
· Keep the product door closed even when not operated. Children or pets could
be locked inside the product and suffocate.
· Cleaning and user maintenance operations must not be performed by children
unless supervised.
Dryer / User Manual
5
· Keep the packaging materials away from children. Risk of injury and
suffocation.
· Keep all additives used with the product away from children. · Before
disposing of the product, cut the power cord and destroy the loading
door.
1.3 Electrical Safety
· The product must not be plugged in during installation, maintenance,
cleaning, repair and transporting operations.
· If the power the cord is damaged, it shall be replaced by authorized service
to avoid any risk that may occur.
· Do not tuck the power cord under the product or to the rear of the product.
Do not put heavy items on the power cord. Power cord shall not be kinked,
pinched and shall not come in contact with any heat source.
· Do not use an extension cord, multi-plug or adaptor to operate your product.
· The product shall not be powered via an external switch such as a timer or
shall not be connected to a circuit that is regularly opened and closed with a
tool. · The plug shall be easily accessible. If this is not possible, a
mechanism that meets the electrical legislation and that disconnects all
terminals from the mains (fuse, switch, main switch, etc.) shall be available
on the electrical installation. · Do not touch the plug with wet hands.
· When unplugging the appliance, don’t hold the power cord, but the plug.
1.4 Transporting safety
· Unplug the product prior to transport, empty the water tank and if any,
remove the water drain connections.
· This product is heavy, do not handle it by yourself. · Take required
precautions for the product against falling and tipping. Do not
crash or drop the product when transporting. · Do not use the extruding parts
of the product (such as the loading door) to
move the product. · Move the product in upright position. If it cannot be
moved upright, transport
via tilting to the right side when viewed from the front.
6
Dryer / User Manual
1.5 Installing safety
· To prepare the product ready for installation, ensure that the electrical
installation and water drain is proper by checking the information in the user
manual. If it is not suitable for installation, call a qualified electrician
and plumber to arrange the utilities as necessary. These operations shall be
undertaken by the customer.
· Check for any damage on the product before installing it. Do not have the
product installed if it is damaged.
· Do not remove the adjustable stand.
· Place the product on a level and hard surface and balance with the
adjustable legs.
· The gap between the product and the floor shall not be reduced via materials
such as rugs, pieces of wood and bands. The ventilation holes under the base
of the product shall not be clogged with a rug.
· The product shall be installed not to clog the ventilation holes.
· Install the product in an environment free of dust with good ventilation.
· Do not install the product in close proximity to flammable and explosive
materials and do not keep flammable and explosive materials near the product
when it is in operation.
· The product shall not be installed against a door, sliding door where the
product loading door cannot be completely opened, or behind a hinged door
where the product hinge is faced against the door’s hinges.
· Install the product where periodic maintenance and cleaning can be done with
ease.
· Place the product with its back surface to the wall (for heater models).
· After placing the product, ensure that the back wall does not come in
contact with any extrusion (a water tap, electrical outlet etc.).
· Place the product with at least 1 cm space between the product and the
furniture edges.
· Follow the flue connection rules specified in the guide (for models with
flue).
· The exhaust air shall not be directed to flue which is used to exhaust the
smoke of devices that consume gas or other fuels (for models with flue).
· The ventilation hose shall not be connected to a heating stove or a chimney
flue (for models with flue).
· Plug the product to a grounded outlet protected with an appropriate fuse in
align with the specified type and current rates. Have an expert electrician
set grounding equipment. Do not use the product without a grounding conforming
with regional/national regulations.
· Plug the product in a grounded socket that conforms with the voltage,
current and frequency values specified in the type label.
Dryer / User Manual
7
· Do not plug the product to loose, broken, dirty, greasy sockets or sockets
that has come out their seats or sockets with a risk of water contact.
· The new hose sets supplied with the product shall be used. Do not re-use the
old hose sets. Do not make attachments to the hoses.
· Place the power cord and hoses not cause a risk of tripping over.
· To use the product on top of a washing machine, a fixing aperture shall be
used between two products. Fixing aperture shall be mounted by the authorised
service.
· When the product is placed on the washing machine, their combined weight
when full could be around 180 kg. Place the products on a sturdy floor that
can carry adequate amount of load.
· Washing machine cannot be placed on top of the drying machine.
Suitable Stacking Table for Washing Machine and Drying Machine
Connection Kit Type
Depth Measurement (DM: Drying Machine, WM: Washing Machine)
Plastic – 54/60 cm (with belt) (SKU: 2986960100)
DM WM DM – WM = max. 10 cm
Plastic – 46cm (with belt)
DM WM DM – WM = max. 10 cm
With Shelf – 60 cm (SKU: 7189731310)
DM WM
With Shelf – 54 cm (SKU: 7189731320)
DM WM
1.6 Usage safety
· The maximum weight of dry laundry prior to washing is specified in
“Technical Specifications” section.
· Do not place the unwashed items in the drying machine.
· Items that are soiled with materials such as cooking oils, acetone, alcohol,
petrol, kerosene, stain removers, turpentine, wax or was removers shall be
washed in hot water with more amount of detergent prior to drying with the
drying machine.
· If chemicals are utilized for cleaning, the drying machine shall not be
used.
· Rubber foam (latex foam), shower bonnets, water resistant textiles, rubber
supported materials and clothes, pillows with rubber foam pads shall not be
dried in a drying machine.
· The items with hair spray, hair product residue or similar materials shall
not be dried in a drying machine.
8
Dryer / User Manual
· Empty the pockets of the clothes and remove items such as matches and
lighters.
· If all items cannot be removed rapidly and cannot be placed where heat can
dissipate, do not stop the drying machine before drying cycle completed.
· The last part of the drying machine cycle is conducted without heating
(cooling cycle) in order to ensure that the items are kept at a temperature
that will not harm the items.
· Laundry softeners or similar products shall be used in align with the
laundry softener instructions.
· Do not use the drying machine without the fibre filter.
· Do not allow fibre accumulation around the drying machine.
· To prevent back draft of gas in the room from the devices that consume other
fuels, including open fire, appropriate ventilation shall be provided (for
models with flue).
· Do not operate the product together with heaters such as gas heater and a
chimney. It may cause the flue to catch fire. (for models with flue)
· Do not lean or sit on the loading door when it is open, the product may tip
over.
· Do not get on the product.
· Do not place a source of flame (candles, cigarettes, etc.) on the product or
in the vicinity of it. Do not keep flammable/explosive materials.
· Do not touch the drum as it revolves.
· The back wall of the product will be hot during operation. Do not touch the
back side of the product during drying or after the drying process is
completed. (For models with heating)
· Do not touch the inner surface of the drum while adding or removing clothes
during a continuing program. The drum surface is hot.
· Do not press the buttons with sharp objects such as forks, knives, with your
nails etc.
· Do not operate the faulty or damaged product. Unplug the product (or shut
down the connected fuse) and call the authorized service.
· Unplug the product when not in use.
· Oil-affected items can ignite spontaneously, especially when exposed toheat
sources such as a tumble dryer. The items become warm, causing an oxidation
reaction in the oil. Oxidation creates heat. If the heat cannot escape, the
items can become hot enough to catch fire. Piling, stacking or storing
oilaffected items can prevent heat from escaping and so create a fire hazard.
Dryer / User Manual
9
· If it is unavoidable that fabrics that contain vegetable or cooking oil or
have been contaminated by hair care products be placed in a tumble dryer they
should first be washed in hot water with extra detergent this will reduce,
but not eliminate, the hazard.
1.7 Maintenance and cleaning safety
· Do not wash the product by spraying or pouring water on it. Do not use a
pressure cleaner, steam cleaner, hose or pressurised gun to clean the product.
· Do not use sharp or abrasive tools to clean the product. · Do not use
materials such as household cleaning agents, soaps, detergents,
gas, gasoline, alcohol, wax, etc. to clean the product. · The fibre filter
shall be regularly cleaned. After each drying cycle, clean the fibre
filter and the inner surface of the loading door. · Clean the fibre
accumulation on the fins of the evaporator behind the filter
drawer with a vacuum cleaner. You can clean by hand, provided you wear
protective gloves. Do not try to clean with bare hands. Evaporator fins may
damage your hands. (For products with heat pump) · Due to fire and explosion
hazard, do not use solutions, cleaning materials, steel wool or similar
materials and tools to clean sensors. · Clean the flue. (for models with flue)
· Do not drink the condensed water.
1.8 Lighting safety
· Contact an authorized service when you need to replace the LED/bulb using
for lighting (for products with lighting).
10
Dryer / User Manual
2 Environmental instructions
2.1 Compliance with the WEEE Regulations and Waste Disposal This product does
not contain the dangerous and prohibited materials indicated in the
“Regulation on The Control of Waste Electrical and Electronic Equipment”
published by Ministry of Environment and Urbanisation of Republic of Turkey.
Complies WEEE Regulations. This product was manufactured from recyclable and
reusable high quality parts and materials. Therefore, do not dispose of this
product with other domestic
wastes at the end of its life cycle. Take it to a collection point for
electrical and electronic equipment. You can ask your local administration
about these collection points. You can help protect the environment and
natural resources by delivering the used products for recycling.
Also R290 is a flammable refrigerant. Therefore ensure that the system and
pipes are not damaged during operation and transportation. Keep the product
from heat sources, otherwise it may catch fire if damaged. Do not dispose of
the product by throwing it into fire.
2.2 Packaging information The product’s packaging is made of recyclable
materials, in accordance with the National Legislation. Do not dispose the
packaging waste with the household waste or other wastes, dispose it to the
packaging collection areas specified by local authorities. 2.3 Standard
conformity and test information / EU declaration of conformity
The development, manufacturing and sales phases of this product is conducted
in conformity with the safety rules specified in all related instructions of
the European Union.
Dryer / User Manual
11
3 Your drying machine
3.1 Technical specifications EN Height (Min. / Max.) Width Depth Capacity
(max.) Net weight (± %10) Voltage Rated power input Model code
84,6 cm / 86,6 cm 59,8 cm 60,7 cm 8 kg 44 kg
See type label
- Min. height: Height with the adjustable stand closed. Max. height: Height with the adjustable stand opened at maximum height.
** Weight of dry laundry before washing. *** Data plate is under the door on the drying machine.
In order to increase the drying machine’s quality, the technical specifications may be changed without prior notice. Figures in this manual are schematic and may not exactly match the product. The values provided with the drying machine or its accompanying documents are laboratory readings in accordance with the respective standards. These values may differ depending on the use and ambient conditions.
12
Dryer / User Manual
3.2 General appearance
11
10
9 8
7
6
1. Top panel 2. Control panel 3. Loading door 4. Kick plate handle 5.
Ventilation grids 6. Adjustable feet 7. Kick plate 8. Rating plate 9. Lint
filter 10. Water tank drawer 11. Power cord
3.3 Scope of delivery
1. Water discharge hose*
1
2. Filter
drawer spare
2
sponge*
3
3. User
Manual
4
5 4. Brush*
5. Water filling cap
6. Pure Water
7. Odour Capsule Group
8. Filter cloth
*Optional – may not be included, depends on model.
Dryer / User Manual
13
4 Installation
Read the “Safety Instructions” first!
Before consulting the nearest Authorized Service for installing the drying
machine, see the information in the user guide and make sure the electric and
water utilities are as required. If not, call an electrician and plumber to
arrange the utilities as necessary.
It is customer’s responsibility to prepare the location the drying machine
shall be placed on and also have power and waste water installation prepared.
Check for any damage on the drying machine before installing it. If drying
machine is damaged, do not get it installed. Damaged products cause a risk for
your safety. Wait 12 hours prior to operating the drying machine.
NOTICE
The product includes a cooling agent and if the product is operated right after its transported, it may get damaged. After each time the product is moved, it shall be left to rest for 12 hours.
4.1 Right place for installation
· Install the drying machine on a flat and stable surface.
· Dryer machine is heavy. Do not move it by yourself.
· Operate the drying machine in an environment free of dust with good ventilation.
· The gap between the drying machine and the floor shall not be reduced via materials such as rugs, pieces of wood and bands.
· Do not block the ventilation grilles of the drying machine.
· There shall not be doors that can be locked, sliding doors or hinged doors near the installation environment of the drying machine that may block the loading door to be opened.
· Once the drying machine is installed, the connections must stay stable.
After placing the drying machine, ensure that the back wall does not come in
contact with any extrusion (a water tap, electrical outlet etc.).
· Place the drying machine with at least 1 cm space between the product and
the furniture edges.
· Your drying machine is suitable to be operated between +5°C to +35°C. If
operated outside this temperature range, your drying machine’s operation may
be compromised and get damaged.
· The drying machine shall not be placed with the back side against a wall.
B Do not place the drying machine on its power cord.
- Ignore following warning if your product’s system does not contains R290.
Dryer contains R290 refrigerant. R290 is an environment-friendly, but flammable refrigerant. Ensure that the air inlet of the dryer is open and it is well-ventilated. Keep potential flame sources away from the dryer.
4.2 Removing the shipping safety group
Remove the shipping safety group prior to first use the product.
14
Dryer / User Manual
Do not leave an accessory or any NOTICE parts of the shipping safety group
inside the drum.
4.3 Water connection Instead of periodically draining the water accumulated in the water tank, you can discharge via the water discharge hose supplied with the drying machine.
Connecting the water drainage hose
1-2 Remove the
1
2
hose behind the
drying machine
by pulling it
manually from
3
4
where it is
attached. Do
not use a tool
to remove the
hose.
3 Insert one end of the water discharge hose supplied with the drying machine
to where you have removed the hose on the drying machine.
4 Fix the other end of the water discharge hose to directly waste water
drainage or a sink.
NOTICE
The water discharge hose shall be fixed at maximum 80 cm height. Ensure that the water discharge hose do not get kinked, collapsed or pressed on between the discharge and the drying machine. Hose shall be connected not to be disconnected from its location. Leaked water may cause damage. Do not extend the water drainage hose. Check whether the water runs at an appropriate flow. The drainage line shall not be closed or clogged.
If an accessory package is provided with your product, check the detailed instructions.
4.4 Adjusting the stands
Until the drying machine stands level and sturdy, adjust the stands by turning
them left and right.
4.5 Moving the drying machine · Drain the water in the drying machine
completely. · If the product is connected via direct
discharge, remove the hose connections.
The drying machine is recommended to be moved in upright position. Otherwise,
tilt it to the right side when viewed from the front and move the drying
machine. Wait 12 hours prior to operating the drying machine. 4.6 Warning
regarding the noise
As the product is operated, metallic noises may come from the compressor from
time to time, it is normal.
When the product is operated, the accumulated water is pumped to the water
tank. It is normal to hear pumping sounds from the appliance during this
operation.
4.7 Replacing the lighting bulb If your drying machine has drum lighting lamp;
Consult the authorized service to replace the bulb/LED used in lighting your
drying machine. The bulb in this product is not suitable for home lighting.
The intended use of this lamp is to ensure safely loading the laundry to the
drying machine. The lamps used in this appliance is resistant to heavy
physical conditions such as temperatures over 50°C.
Dryer / User Manual
15
5 Preparation
Read the “Safety Instructions” first!
5.1 Laundry suitable for drying in drying machine
NOTICE
Laundry that are not drying machine safe may damage the appliance and the laundry during drying. Follow the instructions on the labels on the laundry to be dried. Only dry the laundry with “drying machine safe” written on their labels.
Do not dry with dryer
5.2 Laundry not suitable for drying in drying machine
NOTICE
Undergarments with metal supports shall not be dried in drying machine. If these metal supports get loose and ripped from the garment, it may damage the machine. Delicate embroidery textiles, cotton and silk garments, garments manufactured from delicate and valuable textiles, non breathing garments and tulle curtains shall not be dried in drying machine.
5.3 Preparing the laundry to be dried
Items such as coins, metal parts,
needles, nails, screws, stones etc.
may damage the drum group of the
product or may cause functional
operation issues. Therefore check
all laundry that will be loaded to the
NOTICE
product. Dry the laundry with metal
accessories such as zippers by
turning them inside out.
Close the zippers, hooks and
clasps, button up the covers’
buttons, tie textile belts and apron
belts.
5.4 What to do for energy saving
· Use the highest possible wringing option as you wash the laundry. Therefore you can reduce the drying period and reduce energy consumption. Sort the laundry based on their types and thickness. Dry same types of laundry together. For instance kitchen towels and table cloths dry faster than bathroom towels.
· Follow the recommendations in the user manual for program selection.
· During drying do not open the loading door unless necessary. If you are required to open the loading door, do not keep it open for too long.
· Do not add wet laundry as the drying machine operates.
· Clean the Fibre Filter before and after each drying session.
· For condensation models, be sure to clean the condenser at least once a month or after each 30 drying sessions.
· Make sure the filters are clean. Refer to maintenance and cleaning for details.
· For models with flue, follow the flue connection rules specified in the guides and clean the flue.
· During drying session, properly ventilate the environment in which the drying machine is in.
· On models with heat pump, check the condenser at least every six months and clean it if it is dirty.
16
Dryer / User Manual
· If you are using environment friendly filter, you are not required to clean
the filter after every cycle. When the environment friendly icon is lit on the
screen, change the filter cloth.
5.5 Correct load capacity
NOTICE
If the laundry in the product exceed maximum load capacity, it may not operate
as intended and may cause material damage or damage the product. For each
program, follow the maximum load capacity.
The weights below are provided as examples.
Laundry
Approx. weight
(g)*
Laundry
Approx. weight
(g)*
Cotton bedding (double size) Bedding (single size) Bed sheet (double size) Bed
sheet (single size) Large table cloth Small table cloth
Tea napkin
Bath towel
Hand towel
1500 Cotton dress 500
1000
Dress
350
500
Denim
700
350
Handkerchief (10 pcs)
100
700
T-Shirt
125
250
Blouse
150
100
Cotton shirt 300
700
Shirt
200
350
*Weight of dry laundry before washing.
Dryer / User Manual
17
6 Running the product
6.1 Control Panel
1
2
1. On/Off / Programme selection button. 2. Reverse drum selection button. 3.
Dryness level and wrinkle prevention
selection button.
6.2 Symbols
3
4
5
6
4. End time selection button and child lock selection button.
5. Timer programs and audible warning selection button.
6. Start / Standby selection button.
18
Dryer / User Manual
6.3 Preparation of drying machine · Plug the drying machine. · Open the
loading door. · Place the laundry to the drying machine
without jamming them. · Push and close the loading door.
NOTICE
Ensure that no laundry is jammed to the loading door. Do not close the loading
door with force.
· Select the desired program by using On/Off/Program Selection button, the
machine will turn on.
Selecting the program with the On/ Off/Program Selection button does not mean
that the program started. Press Start / Stand-by button to start the program.
Dryer / User Manual
19
6.4 Program selection and consumption chart EN
Capacity (kg) Spin speed in washing
machine (rpm) Drying Time (minutes)
Programmes
Programme Description
Cottons Cottons Eco Cottons Iron dry Synthetics Mix Towels Outdoor/Sports
Freshen up
Time Setting Gentle Care Bedding Duvet/ Down Wear Jeans Shirts
20
You can dry your heat-resistant cotton textiles with this
programme. A drying setting suitable for the thickness of the products to be dried and the desired level of
8
dryness should be selected.
It dries single layer, casual cotton textiles in the most economical way.
8
You may dry your cotton laundry to be ironed in this
program to have them slightly damp for ease of ironing.
8
(Shirt, T-shirt, tablecloth, etc.)
You can dry all your synthetic textiles with this
programme. A drying setting suitable for the level of
4
dryness you desire should be selected.
Use this programme to dry non-pigmenting synthetic
and cotton laundry items together.Sports and fitness
4
clothes may be dried with this program.
Drying towels such as kitchen towel, bath towel and hand towel.
5
Use it to dry your clothes made of synthetics, cotton
or mixed fabrics or waterproof products such as functional jacket, raincoat etc. Turn them inside out
2
prior to drying.
It just provides airing for 10 – 160 minutes without any
hot air. You can air the cotton and linen laundry that are kept closed for a long time , and eliminate the odour
–
in them.
You may select from time programmes between 10
and 160 minutes to achieve the desired drying level
at low temperature. In this programme, tumble drier’s
–
operation lasts for the set time independently from the
dryness of laundry.
You may dry your delicate laundry or laundry with
hand wash symbol (silk blouses, thin underwear, etc.)
2
at low temperature in this program.
Dry 1 cotton and synthetic duvet cover set by closing the button/zipper.
4
Use it to dry your feather filled duvet
–
You may dry denim pants, skirts, shirts or jackets in this program.
4
It dries the shirts in a more sensitive manner, and causes less creasing and easier ironing.
1,5
1000
205
1000
197
1000
139
800
70
1000
125
1000
170
1000
130
–
10
–
–
1200
45
800
121
800
119
1200
130
1200
50
Dryer / User Manual
Hygienic Drying
Daily Express Energy consumption values
It is the programme that you can dry your washed
products you want to provide with extra hygiene (baby clothes, underwear, towels, etc.). It provides high
5
hygiene for your textiles via heat effect.
Use this program to have 2 shirts ready for ironing.
0,5
800
185
1200
30
Programmes
Capacity (kg)
Energy consumption value Energy rating
kWh per year
star
Cottons, Dryness Level Cupboard ++**
8
135
8
“If you regularly dry the 8 Kg maximum load of Cottons we suggest to connect the drain hose to prevent the dryer stopping mid-cycle in order to empty the tank” (see Section “Connection to the drain”)
** : Energy Label Standard Program according to AS/NZS 2442. Consumption values may vary from the values in the chart depending on laundry type, spinning speed, ambient conditions and voltage levels.
Dryer / User Manual
21
Allergy UK is the trademark of the British Allergy Foundation. The Seal of
Approval has been created to guide people requesting an advice that the
product significantly reduces the amount of the allergens in an environment
where allergic people are present or the product restricts/reduces/ eliminates
the allergens. The purpose is to provide evidence that the products have been
scientifically tested or analysed to yield measurable results.
6.5 Auxiliary functions Dryness level Dryness level button is used for
adjusting to desired dryness. Program time may change depending on the
selection.
You can activate this function only prior to start of program.
Wrinkle prevention You can activate and deactivate the wrinkle prevention
function by holding the end time button for 3 seconds. If you will not take
the laundry out immediately after the program has completed, you may use
Wrinkle prevention function to prevent wrinkling of your laundry.
Audible warning Drying machine makes an audible warning when the program is
completed. Press the “Audible Warning” button if you do not want audible
warning. When you press the audible warning button, the light goes off and it
does not sound when the program is completed.
You can select this function before the program starts or after the program
starts.
Reverse Drum When this button is activated, reverse tumbling frequency
increases to provide better evenness of drying. This option is recommended for
large or long items such as bath towels, sheets, duvet and trousers to reduce
items being twisted and entangled.
End time You can delay the end time of the program up to 24 hours with end
time function. 1. Open the loading door and place the
laundry.
2. Select the drying program.
3. Press the End Time selection button and set the delay time you wish. End
time LED turns on. (When pressed and hold the button, End Time proceeds non-
stop).
4. Press the Start / Stand-by button. End Time countdown begins. The “:” sign
in the middle of displayed delay time flashes.
You can add or remove laundry within end time. Displayed time is the sum of
normal drying time and end time. End Time LED turns off at the end of
countdown, the drying starts and the drying LED turns on.
Changing the end time If you want to change the duration during the countdown:
Pause the program and Turn the On/Off/ Program Selection button and cancel the
program. Select the desired program and repeat the End Time selection.
Cancelling the end time function If you want to cancel the end time countdown
and start the program immediately: Pause the program and Turn the On/Off/
Program Selection button and cancel the program. Select the desired program
and press the “Start/Pause” button.
6.6 Warning indicators
Warning indicators may vary depending on the model of your drying machine.
Filter cleaning When the program is completed, the warning indicator for
filter cleaning turns on.
Water tank If the water tank fills up while the program continues, the warning
indicator starts flashing and the machine goes into stand-by. In this case,
empty the water tank and start the program by pressing the Start / Stand-by
button. Warning indicator turns off and program resumes.
22
Dryer / User Manual
Cleaning of filter drawer/ heat exchanger Warning symbol flashes periodically
to remind that filter drawer must be cleaned.
6.7 Starting the program Press the Start/Stand-by button to start the program.
Start/Stand-by and Drying indicators turn on to show that program started.
6.8 Child Lock The drying machine has a child lock which prevents the program
flow from being interrupted when the buttons are pressed during a program.
When the Child Lock is activated, all buttons on the panel except the
On/Off/Program Selection button are deactivated. To activate the child lock,
press the end time button for 3 seconds. The child lock has to be deactivated
to be able to start a new program after the current program is finished or to
be able to interfere with the program. To deactivate the child lock, keep the
same buttons pressed for 3 seconds.
When the child lock is activated, the child lock warning indicator on the
screen turns on.
When the child lock is active: The drying machine runs, or in stand-by state
the indicator symbols will not change upon changing the position of the
program selection button.
When the drying machine is operated and the child lock is active, if the
program selection button is turned, a double beeping noise will be heard. If
the child lock is deactivated before the program selection button is turned to
its original place, the program will be terminated since the program selection
button is displaced. 6.9 Changing the program after it is started You can
change the program you selected to dry your laundry with a different program
after the drying machine starts running.
· For example, Pause the program and turn the On/Off/Program Selection button
to select the Extra Dry program in order to select the Extra Dry program
instead of Ironing Dryness.
· Press the Start/Stand-by button to start the program.
Adding and removing clothes during stand-by If you want to add or remove
clothes to/from the drying machine after the drying program starts:
· Press the Start/Stand-by button to put the drying machine in Stand-by state.
The drying operation stops.
· Open the loading door while in Standby state, and close the door after you
remove or add laundry.
· Press the Start/Stand-by button to start the program.
Adding laundry after the drying operation starts may cause the dried laundry
inside the drying machine to mix with wet laundry and leave the laundry damp
at the end of operation. Adding or removing laundry during drying may be
repeated as many times as you wish. But this operation continuously interrupts
the drying operation, and thus increases program duration and energy
consumption. So, it is recommended to add laundry before the program starts.
If a new program is selected by turning the program selection button while the
drying machine is in stand-by, the running program terminates.
Do not touch the inner surface of the drum while adding or removing clothes
during a continuing program. The drum surface is hot.
Dryer / User Manual
23
6.10 Cancelling the program If you want to cancel the program and terminate
the drying operation for any reason after the drying machine starts running,
Pause the program and turn the On/Off/Program Selection button; the program
terminates.
The inside of the drying machine shall be extremely hot when you cancel the
program during machine operation, so run the refreshing program to allow it to
cool down.
6.11 End of program When the program ends, the LED’s of End/ Wrinkle
Prevention and Fibre Filter Cleaning Warning on the program follow-up
indicator turn on. Loading door can be opened and drying machine is ready for
another operation. Turn the On/Off/Program Selection button to On/Off position
in order to turn off the drying machine.
If the Wrinkle Prevention mode is active and the laundry is not removed after
the program is completed, the wrinkle prevention function activates for 2
hours to prevent the laundry inside the machine to get wrinkled. The program
tumbles the laundry with 10-minute intervals to prevent them from wrinkling.
6.12 Odour feature If your drying machine has odour feature, read the ProScent
manual to use this feature.
24
Dryer / User Manual
7 Maintenance and cleaning
Read the “Safety Instructions” first!
· Open both of the lint filters (outer and inner) and remove the fibres with your hands or with the brush on the air deflector. You can clean the hair in the filters with a vacuum cleaner.
7.1 Lint filters (internal and external filters) / Cleaning of the Interior Surface of the Loading Door The hair and fibres that are separated from the laundry during drying process is collected by the Lint filter.
After each drying cycle, clean the lint filter and the inner surface of the loading door.
NOTICE
Your drying machine has 2 lint filters with one placed inside the other. Do not operate the product without the lint filters.
To clean the lint filter: · Open the loading door. · Hold the first part
(inner filter) of the two part
lint filter and remove it by pulling it upwards.
· Clean both filters under water running in reverse direction of fibre accumulation or with a soft brush. Dry the filter before placing it back.
· Remove the second part (outer filter) by pulling it upwards.
Ensure that hair, fibre and cotton balls do not fall into the slot where the filters are installed.
Dryer / User Manual
25
· Insert the lint filters on one another and place it back in its place.
7.2 Cleaning the sensor
· Clean the inner surface of the loading door and the gasket with a soft damp cloth or the brush on the air deflector.
· There are temperature sensor in the dryer that detect whether the laundry is
dry or not.
To clean the sensors:
· Open the loading door of the dryer.
· Remove the lint filter by pulling it up.
· Clean the sensor with your hand if any fluff accumulation on it.
Clean the metal surfaces of the sensor 4 times a year. Do not use metal tools to clean the sensors’ metal surfaces.
Due to fire and explosion hazard, do not use solutions, cleaning materials or similar tools to clean sensors.
26
Dryer / User Manual
7.3 Emptying the water tank During drying, the moisture is removed from the
laundry and condensed, then the water is accumulated in the water tank. Empty
the water tank after each drying session.
Condensed water is not potable water! Do not remove the water tank as a
program is running!
If you do not empty the water tank, during the next drying sessions the
machine will stop operating due to the water tank being full and a Water Tank
warning icon will blink. In this case empty the water tank and to continue
drying operation, press the Start / Stand-by button. To drain the water tank:
Pull the water tank out from its drawer carefully. Drain the water in the
tank. Remove the water tank in the drawer or the kickplate carefully.
If fibre is accumulated in the funnel on the water tank, remove it under
running water. Place back the water tank.
If direct discharge option is used, water tank is not required to be drained.
7.4 Cleaning the condenser The hair and the fibre that are not collected by
the lint filter accumulates on the metal surface of the condenser behind the
air deflector. These fibres shall be cleaned regularly. If the condenser
cleaning icon blinks, check the metal surface. If there is any fibre, clean
it. It must be checked at least every 6 months.
Open the toe board by pulling its button.
Dryer / User Manual
Move the latches to open the air deflector lid.
Pull the brush to the left to remove it. You can use the cleaning brush to
clean filter, condensing metal surface and accumulated fibre on the door.
The cleaning brush is inside the documentation bag. Get your brush from the
documentation bag and insert it to its place on the air deflector to store it.
Clean the fibre on the metal surface of the condenser with damp cloth or the
brush on the air deflector in up – down direction. Do not clean with left –
right direction since it will damage the metal plates of the condenser. You
can use a vacuum cleaner with a brush for cleaning. If the vacuum cleaner does
not have a brush, it is not recommended to be used for condenser cleaning.
After cleaning the filter, door and the condenser, drag the brush to the right
and lock it in its place.
27
After the cleaning process is completed, place the air deflector cover to its
place, move the latches to close it and close the toe board.
You can clean by hand, provided you wear protective gloves. Do not try to
clean with bare hands. The condenser fins may damage your hands. Cleaning from
left to right may damage the condenser fins. This may lead to drying issues.
When the air deflector cover is removed, it is normal to have water at the
plastic section in front of the condenser.
If you see fibre accumulation on the fan cover and the toe board, remove with
a cloth.
Do not have weight on the toe board when it is open.
NOTICE
Do not use abrasive materials or steel wool to clean the drum.
28
Dryer / User Manual
8 Troubleshooting
The drying operation takes too long. Fibre filter (interior and exterior
filters) pores may be clogged. >>> Wash the fibre filters with warm water and
dry them The front side of the condenser may be clogged. >>> Clean the front
side of the condenser. The ventilation grills in front of the machine may be
closed. >>> Remove any object in front of the ventilation grills that blocks
ventilation. Ventilation may be insufficient due to the very small area where
the machine is installed. >>> Open the door or windows to prevent the room
temperature from rising too much. If there is a humidity sensor; Limescale may
have accumulated on the humidity sensor. >>> Clean the humidity sensor. The
machine may be overloaded with laundry. >>> Do not load the drying machine
excessively. The laundry may not have been spun enough.. >>> Spin at a higher
speed in the washing machine. The laundry comes out damp after drying. The
program suitable for the laundry type may not be used. >>> Check the care
labels on the laundry and select a program ideal for the kind of laundry or
use additional time programs. Fibre filter (interior and exterior filters)
pores may be clogged. >>> Wash the filters with warm water and dry them The
front side of the condenser may be clogged. >>> Clean the front of the
condenser. The machine may be overloaded with laundry. >>> Do not load the
drying machine excessively. The laundry may not have been spun enough.. >>>
Spin at a higher speed in the washing machine. The dryer does not turn on, or
the program cannot be started. The dryer does not turn on when set. The power
plug may not be plugged in. >>> Make sure the power plug is plugged in. The
loading door may be left open. >>> Make sure that the loading door is properly
closed. The program may not have been set or the Start / Pause button may not
have been pressed. >>> Make sure that the program is set and it is not in
Standby position. Child lock may be activated. >>> Turn off the child lock.
The program was interrupted for no reason. Loading door might not be closed
properly. >>> Make sure that the loading door is properly closed. There might
be a power outage. >>> Press the Start / Standby / Cancel button to start the
program. Water tank may be full. >>> Empty the water tank. Laundry shrunk,
matted or spoiled. The program suitable for the type of laundry may not have
been used. >>> Select a program suitable for the type of laundry by checking
the care labels on the laundry. Water is flowing from the loading door. Fibres
might have gathered on the inner surfaces of the loading door and on the
surfaces of the loading door gasket. >>> Clean the inner surfaces of the
loading door and the loading door gasket surfaces. The loading door opens by
itself. The loading door might not be closed properly. >>> Push the loading
door until the closing sound is heard. The water tank warning symbol is
on/flashing. The water tank may be full. >>> Empty the water tank. The water
discharge hose might have folded. >>> If the product is connected directly to
the water discharge check the hose. The lighting inside the drying machine
does not turn on (in models with lamps). The drying machine might not have
been turned on by the On/Off button. >>> Check that the drying machine is
turned on. Lamp might be broken. >>> Contact Authorized Service to replace the
lamp. Anti-Wrinkle icon or light is lit. An anti-wrinkle program that prevents
the laundry in the dryer from creasing may be activated. >>> Turn the dryer
off and remove the laundry.
Dryer / User Manual
29
The fibre filter cleaning icon is lit. Fibre filters (interior and exterior
filters) may be unclean. >>> Wash the filters with warm water and dry them. A
layer may be formed in the fibre filter pores, leading to clogging. >>> Wash
the filters with warm water and dry them. A layer may be formed in the fibre
filter (internal and external filters) pores that leads to clogging.<<Wash the
filters with warm water and dry>> Fibre filters may not be in place. >>>
Insert the interior and exterior filters into their places. Eco-friendly
filter cloth may not be installed on the plastic part, and the front of the
condenser may have clogged.>>>Install the eco–friendly filter to the plastic
part and place it on the filter housing. Eco-friendly filters may not have
been replaced, although the warning symbol is illuminated. “Replace your
filter.” An audible warning is heard from the machine Fibre filters may not be
in place. >>> Insert the interior and exterior filters into their places.
Filters of the machine may not have been installed.>>> Install the fibre
filters (internal and external) or the environmentally-friendly filter to
their housing. The condenser warning icon is flashing. Condenser front may be
clogged with fibres. >>> Clean the front of the condenser. Fibre filters may
not be place. >>> Insert the interior and exterior filters into their places.
The lighting inside the drying machine turns on (in models with lamps). If the
drying machine is plugged into the power outlet, the On/Off button is pressed,
and the door is open; the light turns on. >>> Unplug the dryer or turn the
On/Off switch to the off position. Wi-Fi icon flashes continuously. (HomeWhiz
Function models) >>> The product may not be connected to the wireless network.
Follow the instructions to connect to the network. The appliance which the
product utilizes to connect to network may be faulty. Check it. The product
may not be connected to the network due to the proximity. Check the steps
below if you see “F L t” on the screen. The filters may be dirty. >>> Clean
the inner and outer filters or replace the eco-friendly filter. In the cover
area, if you are using the inner and outer dual filters. >>> Make sure that
both filters are installed. If you use the eco-friendly filter feature, make
sure the filter cloth is attached to the plastic part. >>>Insert the filter
cloth into the plastic part if it is not inserted. The front side of the
condenser may be dirty. >>> Open and check the kick zone and make sure it is
clean. Check out the Maintenance and Cleaning section.
WARNING !
If the problem persists after following the instructions in this section,
contact your vendor or an Authorized Service. Never attempt to repair a
malfunctioning product yourself.
NOTE!
· If you experience a problem with any part of your device, you can request a
replacement by consulting the nearest authorised service with the appliance
model number.
· Operating the device with non-original parts may cause malfunction of the
appliance. · The manufacturer and distributor are not responsible for
malfunctions caused by non-original parts.
30
Dryer / User Manual
www.beko.com.au
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>