Ehaho L2600 3D Animation RGB Laser Light User Manual

August 22, 2024
eHAHO

Ehaho L2600 3D Animation RGB Laser Light

GENERAL INSTRUCTIONS

Thank you for purchasing this product. Please read the user guide for safety and operations information before using the product. Keep this manual for future reference. This product can create perfect light programs and effects as it has passed a series of strict tests before delivery. Please check the attachments listed on the page after opening the carton. Immediately upon receiving a fixture, carefully unpack the box. Check the box contents to ensure that all parts are present and in good condition. If any part appears damaged from shipping, or if the box shows signs of mishandling, notify the shipper immediately. In addition, retain the box and all packing materials for inspection. In any event, save the carton and all packing materials in case you have to return the fixture to the factory, you will have to do so in its original box, with its original packing.

Safety Notice: Please read the following notes carefully because they include important safety information about the installation, usage and maintenance of this product. It is important to read all these notes before starting to work with this product.

LASER SAFETY WARNINGS

Potential laser injury hazard exists with this product! Read these Instructions carefully, which include important information about installation, safe use and service!

Caution:

  • Avoid direct eye contact with laser light. Never intentionally expose your eyes or others to direct laser radiation.
  • This laser product can potentially cause instant eye injury or blindness if laser light directly strikes the eyes
  • lt is illegal and dangerous to shine this laser into audience areas, where the audience or other personnel could get direct laser beams or bright reflections into their eyes.
  • lt is a US Federal offense to shine any laser at aircraft.

NON INTERLOCKED HOUSING WARNING

  • This unit contains high power laser devices internally. Do not open the laser housing, due to potential exposure to unsafe levels of laser radiation. The laser power levels accessible if the unit is opened can cause instant blindness,skin burns and fires.

  • laser effects projected above the audience are eye safe. A survey should be taken to assess the likelihood of any reflective surfaces (such as high windows, chrome bars etc) bouncing stray beams back down into the audience.

  • Using a fastening clamps on the light and tight to the ceiling in a strong hook.

  • Make sure its correct power output and plug the power cable to the wall socket.

  • Power must be in earth! Power on the l ight.

  • Do not shoot the beams to the audience!

  • Do not look direct into the laser aperture once the laser light is ON. Please pay attention to the laser Danger Warning label!

CAUTION

After setting up, and before public use, test laser to ensure proper function. Do not use if any defect is detected. Do not use if laser emits only one or two laser beams rather than dozens/ hundreds, as this could indicate damage to the diffraction grating optic, and could allow emission of higher laser levels above Class 3B.
Do not point lasers at people or animals. Never look into the laser aperture or laser beams.
Do not point lasers in areas in which people can potentially get exposed, such as uncontrolled balconies, etc.
Do not point lasers at highly reflective surfaces, such as windows, mirrors and shiny metal. Even laser reflections can be hazardous.
Never point a laser at aircraft, this is a federal offense.
Never point un-terminated laser beams into the sky.
Do not expose the output optic (aperture) to cleaning chemicals.
Do not use laser If the laser appears to be emitting only one or two beams.
Do not use the laser if the housing is damaged, the housing is open, or if the optics appear damaged in any way.
Never open the laser housing. The high !laser power levels inside of the protective housing can start fires, burn skin and will cause instant eye injury.
Never leave this device running unattended.

  • During Assembly, operation, maintenance, please pay special attention to avoid possible exposure to laser and collateral radiation in excess of the accessible emission limits.
  • Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
  • Protective eyewear is typically required where direct viewing of a Class 3B laser beam may occur.

ATTENTION!

The scan speed of any laser software control must be less than the scanner speed of your laser light, otherwise, the patterns possible have distortion, or else the scanner will be damaged by over-speed running software!

FIXTURE REAR PLATE

“Menu” is Menu, “Enter” is confirm, “Previous” is UP; “Next” is down.

  1. Displaying mode setting: press MENU to switch the modes: preset effects, professional DMX512, simple DMX512.
  2. preset effects: press ENTER to switch AUTO and Sound mode
  3. Preset AUTO mode: SE+digits, (the fourth Decimal point OFF, digit is the displaying serial number)
  4. preset Sound mode: SE+dlUlts, (the fourth Decimal point ON, adUlt Is the displaying serial number)
  5. press UP/ DOWN to change the serial number.
  6. Professional DMX512 mode: A+digit (digit means the OMX value)
  7. If there is DMX signal, the fourth Decimal point ON; if there is no DMX signal, the fourth Decimal point OFF.
  8. laser light setup mode: press MENU to enter the laser light setup mode.
  9. Optional modes: X-invert, Y-invert, XV co-invert, X-invert position, Y-invert position, Remote control OFF.

2-2: X-invert

  1. X-invert display: x.lNV
  2. Under X-invert mode, press ENTER to change the direction.
  3. Forward direction: the fourth Decimal point OFF; backward: the fourth

Decimal point ON

  1. Y-invert
  2. Y-invert display: y.lNV
  3. Under Y-invert mode, press ENTER to change the direction
  4. Forward direction: the fourth Decimal point OFF; backward: the fourth

Decimal point ON

  1. XY co-invert
  2. XY co-invert display: \.INV
  3. Under this mode, press ENTER to change the direction
  4. Forward direction: the fourth Decimal point OFF; backward: the fourth

Decimal point ON

  1. Remote control OFF
  2. emote control OFF display: OFF
  3. Under this mode, press ENTER to ON/ OFF the remote control function.
  4. ON: the fourth Decimal point OFF; OFF: the fourth Decimal point ON Master/ Slave mode: In the digital display, set the “Slave” unit into “E.001”.

PACKAGING CONTENTS

  • Laser lamp x 1
  • User manual .x 1
  • Remote control x1
  • Power cord x 1

When receiving the product, please handle carefully and check whether the product may be damaged due to transportation. If the machine is found to be damaged, please do not use it and inform the transportation company in time. Please keep the packing box being damaged in transportation for confirmation with the transportation company. After receiving the product, please check the package.

REMOTE CONTROL

| TURN ON THE LIGHT
---|---
| AUTOMATIC LINE ROTATION
| TURN OFF LIGHTS
| DMX34 CHANNEL
| SOUND CONTROL
| DMX6 CHANNEL
| BEAM PATTERN EFFECT
| 3D PATTERN UIFECT
| LINE AND 3D PATTERN EFFECTS
| RED AND GREEN AND BLUE LASER COLOR IS ALWAYS WORKING
| WHiTE LASER COLOR IS AlWAYS WORKiNG
| RED AND GREEN LASER COLORISALWAYSWORKING
| GREEN AND BLUE LASER IS COLOR’ ALWAYS WORKING
| RED AND BLUE LASER COLOR  IS Always WORKING
| GRAPHICS hORiZONTAL FILIP
| GiRAPHICS VERTICAL FLIP
| TURN THE GRAPHIC 90 DEGREES TO THE LEFT

DMX CONTROL PARAMETER CHART

  • Only accepts international standard DMX5i2 signals to control the system.
  • To use the simple DMX mode, press the “DMX SCH” button with the remote control.

SIMPLE DMX MODE

CHANNEL FU NCTIO N VA.LUE DESCRIPTION
**** CH1 **** LASER ON/ OFF 0 OFF
1-255 ON
**** CH2 **** MOVEMENT AUTO/ SOUND COnTROL **** 0-31. PRESET EFFECTS

AUTO MODE
32-63| PRESET 30 PATTERN MODE
64-1.27| PRESET LIGHT BEAM & 3D PATTERN MIXED MODE
128-159| PRESET EFFECTS SOUND MODE
160-1.91| PRESET 3D PATTERN SOUND MODE
:192- .255| PRESET LIGHT BEAM & 3D PATTERN SOUND MODE
CH3| PATteRNS LoCATION

(1.GROUP f’/NUMBER OVER THE MAX, THEN THE PROGRAM IS DEFAULT WITH THE MAX GROUP.2. WHEN CH2 IS UNDER PRESET MIXED MODE, THIS CHANNEL IS INVALID. )

| 0-238| 30 PATTERN EFFECT
24 55| LIGHT BEAM PATTERNS
CH4| 3D PATTERN SELECTION| 0.255| EACH VALUES FOR ONE PATTERN. (1..GROUP NUMBER OVER Tli E MAX, THEN THE PROGRAM IS DEFAULT WITH THE MAX GROUP. 2. WHEN CH2 IS UNDER PR ET MIXED MODE, THIS CHANNEL IS l f’/IVALID. )
CHS| COLOR SELECTION| 0-3 1-| FULL COLOR
32-63| RED
64–915| GREEN
96-1.27| YELLOW
128-159| BLUE
1.60-191| PJNK
192-223| CYAN
224–255| WHITE
CHfl| SPEED ADJUSTMENT| 0| NO MOVEMENT
**** 1-255| SLOW TO FAST

To use the professional DMX mode, press t he “DMX 34CW’ button with t he remote control.

(CH1 CH6) PROFESSIONAL DMX MODE

CHANNEL FUNCTION VALUE DESCRIPTION
**** CH1 **** LASER ON/ OFF 0 LASER OFF
1-25 5 **** IASER ON
**** CH2 **** OUT OFBOUNDS AND PATTERN SIZE 0-49 OVT OFBOUNOS CROSSING
50-99 OVT OFBOUNOS REENTRY
100-149 OVT OFBOUNDS BIANKING
150-249 PATTERN ZOOM OVT, OVT OF BOUNDS BIANKING
250 SAVING
**** CH3 **** GROUPSELECTIONS 0-2:23 GROUP1
244-255 GROUPO
**** CH4 **** PATTERN SELECTIONS **** 0-255 EACH VALUE FORGONE PATTERN:

IF OVER THE PATTERN NUMBERS ,THENPROGRAM DISPIAYINGTHEMAX NUMBER
C HS| PATTERN ZOOMING/ OUT| 0-1.27| STATIC PATTERN SIZE
128-159| DYNAMIC ZOOM OUT. THE BIGGER VALUE, THE FASTER SPEED
16().191| DYNAMIC ZOOM IN. THE BIGGER VALUE, THE FASTER SPEED
192-223| DYNAMIC ZOOM l    OUT.  THE BIGGER VALUE, THE FAST SPEED
224-255| DYNAMIC ZOOM ROTATION.  THE BIGGER VALUE, THE FASTER SPEED
CH6| PATTERN ROTATION| 0-127| STATIC ROTATION
128-159| DYNAMIC ROTATION 2 CIRCLES CLOCKWISE AND COUNTERCLOCKWISE. THE BIGGER VALUE, THE FASTER SPEED
160-191| DYNAMIC ROTATION 2 CIRCLES CLOCKWISE AND COUNTERCLOCKWISE THE BIGGER VALUE THE FASTER SPEED
192-223| DYNAMIC ROTATION CLOCKWISE THE BIGGER VALUE, THE FASTER SPEED
**** 224-255| DYNAMIC ROTATION COUNTER CLOCKWISE. THE BIGGER VALUE, THE FASTER SPEED

(CH7-CH11)


CH7

| **** XMOVING| 0-127| STATICX MOVING
---|---|---|---
128,-ll.59| DYNAMIC UP MOVING , WAViE EFFECT. THE BIGGER VAI.UE , THE FASTER SPEED
160–ll.91| DYNAMIC DOWN MOVING WAVE EFFECT;

THE BIGGER VAI.UE. l’HE FASTER SPEED

192-223| DYNAMIC LEFT MOVl’NG. UIE BIG.GE,R VALUE.

THE FASlER SPEED

224-255| DYNAMIC RIGHT MOVil NG. THE BIGGER VALUE. THE FASslER S1PEW


**** CHS

| ****

**** YMOVING

| 0-127| Sf.| ATtiC MOVING
128-ll.59| DYNAMIC RIGHT MOVING WAVE EFFECT. THIE BIGGER VALUE, THE FASTER SPEED
160–ll.91| DYNAMIC L EFT MOVING WAVE EFFECT. TIIE

BIGGER VALUE. THE FASTER SPEED

192-223| DYNAMIC DOWN MOVING. THE BIGGER
VAtu E, THE ‘| FASTERSF’f:ED
2.24-255| DYNAMIC UP MOVING. THE BIGGER VAU JE, THE FASTER SPEED
C:H9| X ZOOM IN/ 0 1.ff| 0-127| STATIC SIZE


128-:1L59

| DYNAMIC UP MOVING OISTORil ON.

tHE BIGGER VALUE, THE FASTERSPE:EU


160-‘.l!.91

| DYNAMIC DOWN MOVING DIS:J’ORTION. THE BIGGer VALUE. THE FASTER SPEEU
192-223| DYNAMIC WHOM IN/ OIJT
224-255| DYNAMIC ROTATION ZOOM 1r,ri:om .

tHE BIGGER VALUE, THE FAS ER’SPEED

CH10| **** Y ZOOM IN/OUT| 0..127| S TATIC SIZE
128-:!!.:59| DYNAMIC RIGHT MOVING,

DISTORTION.

THE BIGGER VALUE, THE FI\STrn SPEED
160-1.9;1L| DYNAMIC LEft MOVING DISWRno . THE BiGGER VALUE, THE FASTER SPEED
192-223| DYNAMIC ZOOM IN/ OU:J’
**** 224-2–55| DYNAMIC ROTATION ZOOM l OUT. THE BIG.GER VALUE, THE FAS ER SPEED
CH11| FIXED COLOR SETtiNG| 0| ORIGINAL COLOR
1-255| COLOR CHANGE WITH EACH N DOT

(CH12-CH:15)

**** CH12 **** PATTERN COLOR CHANGE 0•7 **** ORIGINAL COLOR
£1-15 RED
16-23 YEL:LOW
24-31 GREEN
32 -39 CYAN
40-47 BLUE
48-55 PINK
56-63 WHITE
**** 64-95 ** WHOLE PATTERN** RGB. THE BIGGER VALUE, THE FASTER SPEED
96-127 WHOLE PATTERN YCP. THE BIGGER VALUE, THE FASTER SPEED
128-159 WHOLE PATTERNRGBYCPW. THE BIGGER

VA.LUE, ‘tlll! fA.6TER 6fll!l!8

160-191| 7 COLOR RGBYCPW. THE BIGGER VALUE, THE FASTER SPEED
19 2-2.23| SINE CHASING COLOR CHANGE
22 4-255| COSINE CHASING COLOR CHANGE
CH13| DOTS| 63| ORIGINAL OOTS
64-127| PATTERN NO DOTS EFFECT, SWEEP LINE BLANKING
128-159| PATTERN NO DOTS EFFECT, SWEEP LINE NO BLANKING
160-255| SAVING
**** CH1 4| DRAWING AND OTHER FUNCTION S(WORKING WITH CHANNEL 15 )| 0-255| ON CH15 VALUE 0-12      PATTERN MOVING

DRAWING ALL ON TO KEEPTHETIME

0.255| ON CH15 VALUE 128-255, WALKING

DRAWING LINEQUANTITY

CH15| DRAWINGJf H15AND CH14TOG HER)| 0·63| SINE MANUAL DRAWING
64-127| COSINE MANUAL DRAWi.NG
128-159| DYNAMIC DRAWING A EFFECTS. THE BIGGER VALUE, THE FASTER SPEED
**** 16 0-191| DYNAMIC DRAWING B EFFECTS. THE BIGGER VALUE, THE FASTER SPEED
192•223| DYNAMIC DRAWI NG C EFFECTS. THE BIGGER VALUE, THE FASTER SPEED
224-255| DYNAMIC DRAW INGO EFFECTS. THE BIGGER VALUE, THE FASTER SPEEDO

(CH16 CH23)

**** CH:24 **** X MOVING 0.127 STATIC X MOVING
128–159 DYNAMIC UP MOVING WAVE Effect.

11-IE BIGGER VAtu E, lHE FASTER SPEED

160-:191| DYNAMIC DOWN MOVING WAVE Eff ECl.

11–IE BIGGER VAtuE, lHE FASTER SPEED

192-:223| DYNAMIC LEFT MOVING. tHE BIGGER VALUE,

lHE FASTER SPEED

224-255| DYNAMIC RIGHt MOVING. lttE BiGGER VAUJE,

JHE FASTER SPEED

CH:25| YMOVING| 0-127| STATICY MOVING
128,.-l.59| DYNAMIC RIGI-IT MOVING  WAVE EFFECT.

THE BIGGER VALU E, lHE FASTIEFI Sl’EED

160-191| DYNAMIC L.£FT MOVING WAVE EFFECT.

THE BIGGER VALUE, THE FAS’TIER SPEED

192–223| DYNAMIC DOWN MOVING. THE BIGGER

VAl UE , THE FAS11ER SPEED

224-255| DYNAMIC UP MOV IN G , TH1  E BIGGER VA.LUE , THE FASTER SPEED
CH26| X ZOOM IN/OUT| 0-127| STATIC SIZE


128-159

| DYNAMIC UP MOVING DISTORTION.

lHE BIGGER VAi.LIE , THE F”ASTER SPEED

160-191| DYNAMIC DOWN MOVlNG DIS TORTION,
11-IE BIGGER V.| Atu E, THE FASTER SPEEO
192-:223| DYNAMIC ZOOM IN/OIJT
224-255| DYNAMIC ROTATION 200J!wli IN/OUf. THE BIGGER VALUE. THE FASTER SPEIEO
C H27| **** ZOOM I/OUT| 0.127| STATIC SIZE
128″159| DYNAMIC RIGHT MOVI NG l)i STORTION . THE

BIGGER VAW E, THE FASTER S PEED

160-191| DYNAMIC LEFT MOVING D liSTOR TI ON. THE

BIGGER VALUE, THE FASTER SPEED

192-223| DYNAMIC ZOOM IN / OUJ
224-255| DYNAMIC ROTATION ZOOM IN / OUT. THE BIGGER VALUE, THE FASTER SPEED
CH28| FIXED COLOR SETTING ,| 0| ORIGINAL COWR
1-256| COWR CHANGE Willi EACH N DOT
CH:29| ** PATTERN COLOR CHANGE| 0-7| Original.. COLOR
8-15| Rm
16-| ·  2 :3| ‘| YELLOW
24-3.1| GREEN
32-3’9| CYAN
40-47| BLUE
48-55|
PINK**
65-63| WHITE

(CH29-CH34)

CH29| PATTERN COLOR CHANGE| 64-95| WHOLE PATTERN RG8 . THE BIGGE.R VALUE, THE FASTER SPEED
---|---|---|---
96-127| WHOLE PATTERN YCP .  THE BIGGER VALU, E THE FASTER SPEED
12 159| WHOLE PATTERN RGBYCPW.

THE BIGGER VALUE, THE FASTER SPEED

16 ,0-19      1| 7 COLOR RGBYCPW. TI-IE BIGGER VALUE, THE FASTER SPEED
.|
19 2-223| SINE CHASING COLOR CHANGE
224-255| COSINE CHASING COLOR CHANGE
CH30| DOTS| 0-63| ORIGINAL DOTS
64-127| PATTERN NO DOTS EFFECT, SWEEP LINE

BLANKING

128-159| PATTERN NO DOTSEFFECT, SWEEP LINE NO BLANKING
160-255| SAVING
CH31| DRAWING AND OTHER FUNCTION   WORKING WITH CHAN EL 15)| 0-15.5| ON CH15 VALUE 0·127, PATTERN MOVING

DRAWING ALL ON TO KEEP THE TIME

0-255| ON CH15 VALUE 128-2 WALKING DRAWING LINE QUANTI
CH32| DRAWING (CH15 AND CH14 TO- GETHER)| 0-63| SINE MANUAL DRAWING
64-127| COSINE MANUAL DRAWING
128-159| DYNAMIC DRAWING A EFFECl S. THE BIG.GER VA.LUE, THE FASTER SPEED
160-191| DYNAMIC DRAWING B EFFECTS. THE BIGGER

VA LUE, THE FASTER SPEED

192-223| DYNAMIC DRAWING C EFFECTS. THE BIGGER VALUE, THE FASTER SPEED
224-255| DYNAMIC DRAWING D EFFECTS. THE BIGGER VA LUE, THE FASTER SPEED
CH33| TWIST PATTERN CHANGE| 0-255| THE MORE VALUE, THE LESS TWISTING (NOTES: WHEN ZOOM IN, ROTATION, MOVING, ROLLING TWISTING EFFECTS, CH16 CAN CONTROL THE EFFECTS,FOR USE WITH CH23
CH34| GRATING SELECTION OTIS; IN SOME SECTIONS, MO E VALUE lHEN LESS G.080 ANGLE)| 0-19 20-39 40-59 3 …..:240-25 13| GRATING GROUP L. 1 . THE 81GGER DIGIT, THE SMALLER PATTERN.

FAQ

1. Q: Does this device need a OMX controller?
A: It comes with a remote control that allows you to easily operate some of the setting modes; the buttons on the back of the machine can also be adjusted.

2. Q: The remote control doesn’t work?
A: The controllable distance of the remote control is 33ft (10m). If the remote control is damaged or missing, please contact us for a replacement!

3. Q: The image is upside down, how to set it properly?
A : Press the “INVERT X/Y SWAP X/ Y” key on the remote control.which enables you to set the image orientation as you like.

4. Q: Can this stage laser light beat with music?
A: Yes, it can be synchronized with music beats. party laser light with sound-activated mode, the remote control presses the “SOUND” button, and sound sensitivity can also be adjusted by pressing the button “SOUND SENSITIVITY”. please use it in an environment with loud sound and fast rhythm, the effect will be better.

5. Q: The laser light doesn’t work after being used for several times?
A : The laser light may be in sound activated mode, where the light beam only appears when there is music or loud sounds. when there is no sound, the laser light does not illuminate, making it appear as if there is a malfunction, which can be easily misunderstood.You can test if you are in sound-activated mode by clapping your hands or making a loud noise. If in sound-activated mode, you can switch to the normal playback mode by pressing the “AUTO” button on the remote control.

STAGE LAMP LENS MAINTENANCE

Here is a simple step-by-step description for cleaning the lens and keeping it in good condition:

  • First, turn off the power. Use a hair dryer and soft brush to remove as much stain as possible.
  • Drip one or two drops of lens cleaning solution on superfine fiber cloth.(The attached cleaning cloth can be used when the lens are not seriously stained)
  • Wipe the lenses in circles, starting from the edge to the center Gently wipe fingerprints, oil stains, stains and dust.

Tips:

  • Clean the lenses regularly to ensure that the lenses are always in the best condition and provide a bright and clear laser beam effect.
  • Smoke machines if used frequently and should be cleaned more frequently.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals