Werkzeyt ZYT380250 Pocket Torch Conmetall Meister Instruction Manual
- June 11, 2024
- Werkzeyt
Table of Contents
Werkzeyt ZYT380250 Pocket Torch Conmetall Meister
Product features:
- Item number: ZYT380250
- Light output: max. 90 lumen
- max. luminous range: 100 m
- max. luminous duration: 6 hours
- Weight with batteries: approx. 380 g
- Splash-proof externally anodised aluminium housing
- Battery operation (AAA Micro · LR03 · 1.5 V · 3 pieces (included))
Intended use:
- This product is only suitable for lighting for private use.
- The product is not intended for commercial or any other use.
- The distributor accepts no liability for incorrect use and/or unauthorised modifications to the product.
Safety instructions:
- CAUTION: LED radiation! Do not look directly into the LED beam or shine the lamp into the eyes of other living creatures.
- Do not use old and new batteries together.
- Leaking or damaged batteries can cause burns if they come into contact with the skin; therefore be sure to wear suitable protective gloves in this case.
- Never expose the unit to high temperatures and humidity, otherwise the unit may be damaged.
- In case of damage, repairs or other problems with the lamp, contact the service centre or a qualified electrician.
- Do not mount the lamp on a damp or conductive surface.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and/or knowledge.
- Liability is excluded in case of improper use and non-observance of the operating instructions.
Cleaning:
Remove the batteries from the lamp before cleaning. Use a dry cloth to clean
the lamp and never use petrol, solvents or cleaners that could damage
plastics. Use a slightly damp cloth for heavier soiling.
Operation:
Insert batteries:
- Unscrew the rear end of the lamp
- Insert the AAA Micro · LR03 · 1.5 V batteries into the battery holder. Make sure that the polarity of the batteries and the battery holder is correct.
- Close the lamp again by screwing the end back on.
- Please remove the batteries if you will not be using the unit for a long time.
Switching on / off:
Pressing the button at the back of the lamp will switch the lamp on and off.
Selecting the light modes:
Each time the lamp is switched on and off, it switches to the following modes:
- 100 %
- 50 %
- Flashing mode
Declaration of conformity
You can view the declaration of conformity at
www.conmetallmeister.de
Documents / Resources
|
Werkzeyt ZYT380250 Pocket Torch Conmetall
Meister
[pdf] Instruction Manual
ZYT380250 Pocket Torch Conmetall Meister, Pocket Torch Conmetall Meister,
Torch Conmetall Meister, Conmetall Meister, Meister
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>