eHAHO ‎EH3FT1N-01 LED Atmosphere Light App User Guide

eHAHO ‎EH3FT1N-01 LED Atmosphere Light App

LED Atmosphere Light App Guide

1. Download “Magic-lantern “from the App Store or Google Play Store.

2. Open the app and click “ok”. If you accidentally click “don’t allow·, go into your phone’s settings and find “Magic-Lantern”.
   Then, allow Bluetooth through your phone’s settings. This is essential to connect your phone to your lights.

3. Turn on your phone’s Bluetooth. Then, plug in and turn on your LED Atmo-sphere lights. After, click the icon in the top left corner of the app. You should see your lights appear under “my devices” (this may take up to 3 minutes). Click on your lights to finish pairing them with your app.

Music Mode
Currently music mode is only available for songs that have been downloaded onto your phone. Apple Music, Spotify, and other streaming services generally do not down-load songs to your phone. As a solution, you can use the “Mic” mode so that your lights automatically adjust to the sound of music.
To use mic mode, click “mic” in the bottom right of the screen. Then, click “OK” to allow the app to access your phone’s mic.

Music dancing lights pattern can be triggered by your phone’s mic or external mic of the products. Set the sensitivity to adjust the External MIC to sense the external sound of frequency and intensity. Lights will sync with the sound’s frequency and intensity.

I.ED CAR ATMOSPHERE LIGHTS CONTROi.i.ED BY t.OTUSI.ANTERN APP

• Works with APP
• Long-range control convenient and quick
• Brightness control from 1 % to 100%
• Seven romantic scene modes are optional
• More Than 16million of Colors
• Multi modes can be controled by one APP
• DIV selection by APP controller to create your great led mood light

RF Remote controller

• One-to-one Remote Control Setting
  Long press the ON button about 2-3 seconds, the whip lights flashes twice, which means the whips lights locked and only control by your controller and not affected by others remote controller

• The music activation mode can be used only after adjusting the sensitivity of the external microphone in the “Magic Lantern” APP

Includes

Box comes with (single pc)

Box comes with (combo set)

Warning
his recommended that th,s u,stallatlon be performed by a ljcensed professfonal. The improper insrallatlon of this kit wUI void all warranties.
PLEASE READ THE FOLLOWING INSTRUCTIONS THOROUGHLY BEFORE INSTALLING AND OPERATING THIS LED WHIP

INSTALLATION

Step 1 Mount Up

1. Remove the bonom nut and the spring washer on ,he bottom of your quick.release mount
2. Mount the LED WHIP into any open½”‘ bolt mount on your vehicle, Make sure the flat washer is in between the whip and the mount
3. Place the spring washer underneath the mount and then rescrew the bottom nut
4. Have a pair? Go fol’ rnund 2 and mount lhe 2nd whip the same way

Step 2 Get wired!

1. Grab your battery cord and connect it to the bottom hanging cord on your LED WHIP

2. Have a pair? Connect the 3-prong plug coming out the side of the master L.£D WHIP to the plug coming from che slave LED WHIP.
   Note: The slave LEO WHIP cannot function without being connected to the maste< LED WHIP

3. Feed the power cord through to your vehicle battery

4. Connect the te,mtnal wl,e to the Positive(+) and NegativeH terminals of your vehicle banery

5. Hide any extra wifing with zip ties

Step3

Using the nag mounts to secure flag to the whip

SPEC A One PC LED Whip

SPEC B One Pair LED Whips

Documents / Resources

| eHAHO ‎EH3FT1N-01 LED Atmosphere Light App [pdf] User Guide
EH3FT1N-01 LED Atmosphere Light App, EH3FT1N-01, LED Atmosphere Light App, Atmosphere Light App, Light App, App
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>