KitchenAid KSMSIA Shave Ice Attachment Owner’s Manual

KitchenAid KSMSIA Shave Ice Attachment Owner’s Manual

PRODUCT SAFETY

Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages

This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.” These words mean:

DANGER You can be killed or seriously injured if you don’t immediately follow instructions.
WARNING You can be killed or seriously injured if you don’t follow instructions

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed, including the following:

1. Read all instructions. Misuse of appliance may result in personal injury.
2. To protect against risk of electrical shock, do not put Stand Mixer in water or other liquid.
3. This appliance is not intended for use by children or by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge. Close supervision is necessary when any appliance is used near children. Children should be supervised to ensure that they do not play with the appliance. Never leave the appliance unattended while it is in operation.
4. Avoid contacting moving parts. Keep fingers out of discharge opening.
5. The use of attachments/accessories not recommended or sold by KitchenAid may cause fire, electric shock or injury.
6. Do not use the appliance outdoors.
7. Turn the appliance off (Off/0), unplug from outlet and detach the attachment from appliance before cleaning and when not in use. Turn the appliance off (Off/0) and make sure the motor stops completely before putting on or taking off parts.
8. Allow the appliance to cool completely before putting on or taking off parts, and before cleaning the appliance.
9. Blades are sharp. Handle Carefully.
10. Also see the Important Safeguards section included in the Stand Mixer Owner’s manual.

SAVE THESE INSTRUCTIONS

This product is designed for household use only

PRODUCT USAGE
The Shave Ice Attachment is compatible with all household KitchenAid Stand Mixers. Set the Blades to Shave Ice as per requirement

10

Fine Shave Blade|

| For a fine, fluffy, snow-like ice shaving texture.

NOTE: For detailed instructions on swapping blades, please see “Changing the Blade” section.

TEMPERING THE ICE PUCKS

Tempering Ice means allowing the ice to adjust at room temperature until it develops a glossy, wet look and is clear from all sides. Tempering is an important step for producing the lightest and fluffiest Shave Ice. Many factors determine the amount of time it takes to temper. In most cases, your ice puck should be ready to use in 10 minutes or less.
NOTE: Ice pucks made with plain water require tempering. For mixed base recipes, refer to the recipe details for tempering instructions. The Ice Molds are used for best performance for both coarse and fine shaving. It’s easy to get shave ice from tempered ice out of the molds.
TIP: For the fluffiest Shave Ice, we recommend tempering the ice puck for 10 minutes, and then using the Fine Shaving Blade.

ICE PUCK PREPARATION

1. Fill the ice mold with water or flavored ice base mixture of your choice.
   NOTE: To keep the mold from overflowing while freezing, be sure not to fill past the fill line
   visible just below the rim of the mold.

2. Affix the lid to the top of the mold and place it in the freezer for 12 to 24 hours.
   NOTE: Freezing time may vary and will depend both on the temperature of your freezer as well as the sugar or alcohol content of your mixture.

3. Remove the molds from the freezer and allow ice to rest, in the mold, for up to 10 minutes this is called “Tempering” and is recommended to achieve ideal Shave Ice results. Alternative Steps: Remove the lid, turn the ice mold on its side and run it under lukewarm water for 15 – 20 seconds, rotating the mold to wet all sides. Turn the mold upside down and press firmly on the mold upside down and press firmly on the bottom/sides of the mold to extract the puck.
   NOTE: If you follow Alternative Steps above, the recommended tempering time may be greatly reduced. Your ice is properly tempered when a wet, glossy sheen covers the entire surface. This can take up to 10 minutes under some circumstances.
   NOTE: See “Tips for Great Results” sections in Online “Product Guide” for more details on Ice Puck Preparation

SET UP AND ASSEMBLY – PREPARING TO MAKE SHAVE ICE

Before using your Shave Ice Attachment, clean it by following the detailed instructions in “Care and Cleaning” section

1. Turn the Stand Mixer off (Off/0) and then unplug.
2. For Stand Mixer with a hinged attachment hub cover: Flip up to open. For Stand Mixer with a removable attachment hub cover: Turn the attachment knob counterclockwise to remove the attachment hub cover.
3. Insert the Main Housing into the attachment hub, make sure the power shaft fits into the square hub socket. If necessary, rotate the attachment back and forth for proper fitment. The pin on the attachment housing will fit into the notch of the hub rim when in the proper position.
4. Tighten the Stand Mixer attachment hub knob clockwise until the attachment is completely secured into the Stand Mixer.
5. Ensure that the upper lever of the housing is rotated all the way to left. If not, rotate it to the left until it clicks into place. This will ready the attachment for use and must be completed before loading the Ice Puck into the Ice Cup and attaching it to the housing.
6. Remove the Ice Cup from the housing by rotating it to the right and pulling downward. Take note of the small indicator arrow which must line up with the Lock and Unlock symbols on the housing.
   OPTIONAL: If you wish to change the blade, grip the blade from the bottom and rotate it to right to unlock and remove.

ASSEMBLY

1. Grip the blade from the bottom and slowly insert it into the bottom of the Ice Cup by aligning the interlocking tabs. Once inserted, rotate the blade to the left until you hear a “Click”, to properly lock the blade in place.
   NOTE: Each of the interlocking tabs is unique size, ensuring the blade can only be installed in the correct position.

2. Insert the Ice Cup Sleeve into the Detachable Ice Cup, then insert a prepared Ice Puck. Be sure to insert the ice puck with the cross hatches facing upward.

3. Attach the Detachable Ice Cup to the bottom side of the Main Housing, rotating it to the left to lock it in place.
   NOTE: The small indicator arrow on the Detachable Ice Cup that should line up with the Lock and Unlock symbols on the Main Housing.

4. Release the top lever by gently rotating it to the right. The spring will engage as the Ice Pusher clamps down on the ice puck. The Shave Ice Attachment is properly loaded and ready to use.

SHAVING ICE

1. Place a serving dish of your choice beneath the Shave Ice Attachment. Do this before starting the mixer. WARNING
   Electrical Shock Hazard
   

   • Plug into a grounded 3 prong outlet.
   • Do not remove ground prong.
   • Do not use an adapter.
   • Do not use an extension cord.
   • Failure to follow these instructions can result in death, fire, or electrical shock

2. Plug the Stand Mixer into a grounded outlet Set the mixer to the highest speed to begin shaving.
   NOTE: For best results, consider rotating the dish as the ice shaves to create a more even, cone-shaped mound of ice.

3. Once shaving is complete, turn off the mixer and return the upper lever to the leftmost locked position.

4. Remove the Ice Cup from the housing by rotating it to the right and pulling downward. Discard any remaining ice.

5. Finish your Shave Ice dessert with a variety of flavorings or toppings of your choice.

CHANGING THE BLADE

1. Grip the blade from the bottom and rotate to the right to remove, or to the left to install. Once inserted, rotate the blade to the left until you hear a “Click”, to properly lock the blade in place.
2. Each of the interlocking tabs is unique size, ensuring the blade can only be installed in the correct position

CARE AND CLEANING

IMPORTANT: Allow the appliance to cool completely before putting on or taking off parts, and before cleaning the appliance.
NOTE: Disassemble the unit properly before cleaning. For instructions, refer to the Set Up and Assembly section Steps 5, 6 and optional.

essembly section Steps 5, 6 and optional.

1. The following parts are dishwasher-safe, top rack only: Detachable Ice Cup, Fine and Coarse Blades, Plastic Ice Molds, Ice Cup Pusher, Ice Cup Sleeve and Lids.
2. Do not immerse Housing in water or other liquid. Wipe clean with a warm, damp cloth, and dry thoroughly with a soft cloth before re-use or storing. Or, clean them thoroughly in warm sudsy water and rinse completely before drying

WARRANTY AND SERVICE

KITCHENAID® SHAVE ICE ATTACHMENT WARRANTY FOR THE 50 UNITED STATES, THE DISTRICT OF COLUMBIA, PUERTO RICO, AND CANADA

This warranty extends to the purchaser and any succeeding owner for Shave Ice operated in the 50 United States, the District of Columbia, Puerto Rico, and Canada.
Length of Warranty: One Year Full Warranty from date of purchase

1. KitchenAid Will Pay for Your Choice of

Hassle-Free Replacement of your Shave Ice. See the next page for details on how to arrange for service, or call the Customer eXperience Center toll-free at 1-800-541-6390.
OR
The replacement parts and repair labor costs to correct defects in materials and workmanship. Service must be provided by an Authorized KitchenAid Service Facility

2. KitchenAid Will Not Pay for:
   a ) Repairs when your Shave Ice is used in other than normal single family home use.
   b ) Damage resulting from accident, alteration, misuse or abuse.
   c ) Any shipping or handling costs to deliver your Shave Ice to an Authorized Service Facility.
   d ) Replacement parts or repair labor costs for Shave Ice attachments operated outside the 50 United States, District of Columbia, Puerto Rico, and Canada

3. DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES IMPLIED WARRANTIES, INCLUDING TO THE EXTENT APPLICABLE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXCLUDED TO THE EXTENT LEGALLY PERMISSIBLE. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED TO ONE YEAR, OR THE SHORTEST PERIOD ALLOWED BY LAW. SOME STATES AND PROVINCES DO NOT ALLOW LIMITATIONS OR EXCLUSIONS ON HOW LONG AN IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. IF THIS PRODUCT FAILS TO WORK AS WARRANTED, CUSTOMER’S SOLE AND EXCLUSIVE REMEDY SHALL BE REPAIR OR REPLACEMENT ACCORDING TO THE TERMS OF THIS LIMITED WARRANTY. KITCHENAID AND KITCHENAID CANADA DO NOT ASSUME ANY RESPONSIBILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. This warranty gives you specific legal rights and you may also have other rights which vary from state to state or province to province.

HASSLE-FREE REPLACEMENT WARRANTY—50 UNITED STATES, DISTRICT OF COLUMBIA, AND PUERTO RICO

We’re so confident the quality of our products meets the exacting standards of KitchenAid that, if your Shave Ice should fail within the first year of ownership, KitchenAid will arrange to deliver an identical or comparable replacement to your door free of charge and arrange to have your original Shave Ice returned to us. Your replacement unit will also be covered by our one year limited warranty.

If your Shave Ice should fail within the first year of ownership, simply call our toll-free Customer eXperience Center at 1-800-541-6390

Monday through Friday. Please have your original sales receipt available when you call. Proof of purchase will be required to initiate the claim. Give the consultant your complete shipping address (no P.O. Box numbers, please).

When you receive your replacement Shave Ice, use the carton, packing materials, and prepaid shipping label to  pack up your original Shave Ice and send it back to KitchenAid.

HASSLE-FREE REPLACEMENT WARRANTY – CANADA

We’re so confident the quality of our products meets the exacting standards of the KitchenAid brand that, if your Shave Ice should fail within the first year of ownership, we will replace your Shave Ice with an identical or comparable replacement. Your replacement unit will also be covered by our one year limited warranty.

If your Shave Ice should fail within the first year of ownership, simply call our toll-free Customer eXperience Center at 1-800-807-6777 Monday through Friday. Please have your original sales receipt available when you call. Proof of purchase will be required to initiate the claim. Give the consultant your complete shipping address.

When you receive your replacement Shave Ice, use the carton, packing materials, and prepaid shipping label to pack up your original Shave Ice and send it back to KitchenAid.

ARRANGING FOR SERVICE AFTER THE WARRANTY EXPIRES, OR ORDERING ACCESSORIES AND REPLACEMENT PARTS

• In the United States and Puerto Rico:
• For service information, or to order accessories or replacement parts, call toll-free at 1-800-541-6390 or write to:
• Customer eXperience Center, KitchenAid Small Appliances, P.O. Box 218, St. Joseph, MI 49085-0218
• Outside the United States and Puerto Rico:
• Consult your local KitchenAid dealer or the store where you purchased the Shave Ice for information on how to obtain service.
• For service information in Canada:
• Call toll-free 1-800-807-6777.
• For service information in Mexico:
• Call toll-free 01-800-0022-767.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>