HAZET 1979w-85 LED Solid Light Wireless Instruction Manual
- August 23, 2024
- HAZET
Table of Contents
1979w-85 LED Solid Light Wireless
Instruction Manual
1979w-85 LED Solid Light Wireless
TECHNICAL DATA 1979W-85
| Lumen Top Light | 300 lumen |
|---|---|
| Lumen Main Light | 600 ~ 60 lumen |
| Battery life for top light | 4,5 h |
| Battery life for main light | 3 h – 20 h |
| Charging time | 3,5 ± 0.5 h |
| Li-ion rechargeable battery | 3.7 V |
| protection class | IP65/IK09 |
| Storage temperature | -20 °C to 50 °C |
| Operating temperature | -10 °C to 35 °C |
| Weight of light incl. battery | 370 g |
| Dimensions of ligh | 55 x 35 x 255 mm |
| Illuminant | 1x COB LED; 1x SMD LED |
| Input voltage | 5 V DC |
| Input current | Max. 1,000 mA |
| illumination Top Light | 3 Watt SMD LED |
| illumination Main Light | 6 Watt COB LED |
Information
- Battery indicator will be shut off after the lamp is turned on for saving power!
- Low battery capacity warning, the first indicator LED will flash when battery capacity is less than 25%
For Your Safety
Warning
Electrical energy can cause serious injuries. In order to avoid electrical
shock, injuries or fi re the following safety instructions have to be observed
and respected:
- Please make sure that lead and housing are not dam- aged. Lights and charging stations that have been dropped or that are damaged, must be checked by qualified personnel before restarting operation.
- When laying the power supply lead, please make sure that it does not come into contact with hot or sharp parts and that it cannot be damaged in anotherway. The lead is to be laid in such a way that it does not constitute a risk of stumbling.
- The LED Solid Light, Wireless must not be exposed to water or other liquids. Dangerous voltage discharge may occur.
- Service and repair work should be carried out by qualified technical personnel only. In order to ensure the working reliability in the long term, always use original spare parts.
- The LED Solid Light, Wireless must not be disassembled. Inappropriate assembly can lead to a reduction of the functionality, to fi re, to electrical shocks and/ or to injury.
- Do not remove any safety devices.
- Never look directly into the light, the light intensity is strong enough to cause eye injuries.
- An extension cord must be sufficiently dimensioned using. Cables which are not appropriate for the necessary amperage may overheat.
- While using the LED Solid Light, Wireless slightly warm up which does not reduce their functionality. When working with the work light, appropriate caution is required.
- Only use the LED Solid Light, Wireless within the prescribed places, and governed under the current regulations relating to the working environment and to electrical systems.
- Only use the 1979WP-1 or 1979WP-2 charging pad to charge the LED Solid Light Wireless. Using other charging pads may damage the LED Solid Light Wireless!
Intended use:
The LED Solid Light Wireless is intended for the use in workshops, as an
inspection light, for installation work and / or for illuminating areas with
reduced visibility.
Warranty
Any deviation from the intended use is not allowed and will be considered as
improper use. Improper use means:
- Products that have been modified or repaired by persons not belonging to HAZET.
- Misuse, improper handling, negligence and any deviation from the intended use or from the instructions and specifications of HAZET or
- Use in combination with any other product, device, component or system that is damaged, may cause malfunction or is not intended for use in combination with this tool.
Safety Instructions Disposal
For disposal the light and the Lithium-Ion battery must be supplied to the
respective public recycling system.
Never look straight into the light.
The light intensity is strong enough to cause eye injuries.
HAZET-WERK Hermann Zerver GmbH & Co. KG
Güldenwerther Bahnhofstr. 25-29
42857 Remscheid · GERMANY