DOMYOS 8363074 Energy Console Instructions

: June 5, 2024
: DOMYOS

Table of Contents

REVISION HISTORY
PRODUCT PROFILE
Standards of CONSOLE 3
USER-key flow and Machine-Keyflow
Electronic hardware
DECATHLON CONTROL
Mechanical hardware
Traceability
Chest-belt
Bluetooth specification
CMIIT_FCC_IC Label
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

8363074 Energy Console
Instructions
DOMYOS CONSOLE 3
**– TECHNICAL SPECS –

**

PROJECT NAME| MODEL CODE|

ITEM CODE

---|---|---
DOMYOS CONSOLE 3 – B ENERGY| 8363074| 2067995
DOMYOS CONSOLE 3 – B ENERGY CN| 8369237| 2112862
DOMYOS CONSOLE 3 BLACK| 8368168| 2101226
DOMYOS CONSOLE 3 BLACK CN| 8369246| 2112890
DOMYOS CONSOLE 3 BLACK R| 8368167| 2101224
DOMYOS CONSOLE 3 BLACK R CN| 8369244| 2112888

REVISION HISTORY

2020-07-27| 1. Add the CMIIT_FCC_IC sticker
2. Add FCC Statement
3. Add IC Statement| 7| ** Leo LV
---|---|---|---
2019-08-22| Add CMIIT ID Sticker| 6| Leo LV
2018-02-15| DTC 2018
The firmware version is 1.7| 5| Guillaume DIVRECHY
2017-05-16| DTC 2017| 4| Guillaume DIVRECHY
2016-03-07| Adding :
– new Console3 codes (page 01)
– remote control cable spec and testing method (page 07)
– PMMA artwork for China versions (page 06)
– Traceability sticker codes (page 10)
– Bluetooth codes and equipment codes and testing method (page 13)
-Toggle-switch selector position (page 05)| 3| Guillaume DIVRECHY
2015-12-28| Modifications in yellow| 2| Guillaume
| | | GIVENCHY
---|---|---|---
2015-12-07| ORIGINAL DOCUMENT| 1| Guillaume DIVRECHY
DATE| DESCRIPTION| REVISION| AUTHOR**

PRODUCT PROFILE

1.1. Introducing
Technical requirements of Domyos middle-of-range Console: DOMYOS CONSOLE 3 This console is connected thanks to Bluetooth Low energy protocol. This console can connect an APP with Android and Ios devices as to provide a new user experience.
****Console3 main features :

5 Led modules :

RPM information (pedaling cadence)
KCAL information (calories burnt)
SPEED + TIME + DISTANCE + HR information (pushing keys under Led the module will display the associated value)
Heart-logo is changing color according to the heart-rate zone.
Heart rate value < 60% Fcmax = Blue
Heart rate value = 60% Fcmax ~ 69%Fcmax = Green
Heart rate value = 70% Fcmax ~ 79%Fcmax = Yellow
Heart rate value = 80% Fcmax ~ 89%Fcmax = Orange
Heart rate value 90% Fcmax = Red
Bluetooth logo controlled ON or OFF by Bluetooth through APP
Workout profile (5×7 dots matrix)
Resistance level (from 1 to 15)
9 touch-keys (capacitive membrane). Keys are in white colors.
One heart-rate receiver
One hand-pulse receiver (only for DOMYOS CONSOLE 3 – B ENERGY)
One chest belt provided with the Console 3
Two remote control cables (only for CONSOLE 3 “R” versions)

Standards of CONSOLE 3

2.1. 2011/65/UE Directive “RoHs 2”
2.2. REACH directive
2.3. R &TTE directive
2.4. Temperature cycling test.
Low temperature : (- 10 ± 2)°C during 10 min
High temperature : (+60 ± 2)°C during 10 min
Cycles: 50 Times
2.5. Temperature storage test.
+60°C during 24 hours consecutive 2.6. ESD test.
Air: ±12KV Contact: ±7KV
Reports are inside PACE

USER-key flow and Machine-Keyflow

User-key flow is the main key flow used by end-customer.

DECATHLON CONTROL
The test can be done using a bike or jig simulator proposed by CY. Functional test of the user interface of the console :

Displays are working and information values are changing during a training session. (Kcal, distance, time, rpm, BPM (when active), resistance level)
Heart-logo is changing color from blue green yellow orange red according to heart-rate value.
Each touch-key is activated during a finger touch contact < 1 second 4) Servo-motor is turning when increase or decrease a resistance level (0 to 15)

ACCEPTANCE CRITERIA
The main functions are ok Machine-key flow is a ghost menu for maintenance. This menu can check

The firmware version of the console
The hardware version of the console
Console total time of use
Console total km of use
Console serial number (see traceability paragraph)

Machine-key flow has also a unit-choice menu where end-user can change from Km to Miles.

DECATHLON CONTROL
The firmware version is 1.7 (enter inside maintenance ghost menu)
By default, the console unit is Km (use console with the bike of the bike- simulator jig)
Toggle-switch selector on the rear-casing is on VM Toggle-switch selector on the rear casing is on VE (for the “R” console version only)
ACCEPTANCE CRITERIA
The firmware and Hardware version are ok Units is Km

Electronic hardware

DECATHLON CONTROL
Check the connector gender is male.
ACCEPTANCE CRITERIA
The cables are correct.

DECATHLON CONTROL

Using CY hand-pulse sensor kit. For information, hand-pulse monitoring is less accurate than chest-belt monitoring.
Without tablet and smartphone put on the console tablet holder:
The testing method as end-user case:
a) put your hands on hand-pulse sensors jig
b) waiting 30 seconds to get a stabilized value
c) after these first 30 seconds, check if value fluctuation is under +/- 10bpm during 30 more seconds. (hand-pulse technology is not precise, just for marketing)
With tablet and smartphone put on the console tablet holder :
The testing method as end-user case :
a) put your hands on hand-pulse sensors jig
b) waiting 30 seconds to get a stabilized value
c) after these first 30 seconds, check if value fluctuation is under +/- 10bpm during 30 more seconds. (hand-pulse technology is not precise, just for marketing)
The test has to be done by placing the tablet on its different 4 faces.
ACCEPTANCE CRITERIA
Heart rate is ok with hand-pulse sensors
4.6. Remote-control cables (only for CONSOLE 3 BLACK R reference )

(down resistance level)

DECATHLON CONTROL
Check the gender of each connector is correct.
Functional test, increasing and decreasing the resistance level. ACCEPTANCE CRITERIA Gender is correct, and function is ok.

Mechanical hardware

DECATHLON CONTROL

Cosmetic

Few scratches on the protection film surface
Protection film has no fold, no tear
no scratches on the PMMA surface
No trace of glue on the edges of the rubber and PMMA
No trace of incrusted dust on the plastic casing
PMMA print is correct and clean (no drip, print is uniform, compliant with artwork)

Assembly

The casing is correctly clipped all around (<1mm of air gap between the front and rear plastic casing)
PMMA sickness is correct (example of 4 hours temperature 70°C test)
Rubber sickness is adjusted on all edges (<1mm of air gap between rubber edge and plastic casing)
Rubber sickness is correct (example of 4 hours temperature 70°C test)
The elastic strap is correctly fixed, and the plastic hook can cover an IPAD 10″ when in landscape

The maximum length is 420mm (+/-5mm) after stretching with a maximum pulling force of 3,1Kg
ACCEPTANCE CRITERIA
This control is very subjective, trust on QPL high requirement to validate or not.

Traceability

Traceability format :

Console

|

Traceability

---|---
DOMYOS CONSOLE 3 BLACK| CY BKE CYYWwwxxxxx // BKE = BK (Bike) + E (Europe)
DOMYOS CONSOLE 3 BLACK CN| CY BKC CYYWwwxxxxx // BKC = BK (Bike) + C (China)
DOMYOS CONSOLE 3 BLACK R| CY ELE CYYWwwxxxxx // ELE = EL (Elliptical) + E (Europe)
DOMYOS CONSOLE 3 BLACK R CN| CY ELC CYYWwwxxxxx // ELC = EL (Elliptical) + C (China)
DOMYOS CONSOLE 3 – B ENERGY| CY BEE CYYWwwxxxxx (specific for one bike only)
DOMYOS CONSOLE 3 – B ENERGY CN| CY BEEC CYYWwwxxxxx (specific for one bike only) C (china)

DECATHLON CONTROL
Stickers are all here and stuck in the right position
Important: For the Chinese Version, the CMIIT ID sticker has to be pasted near Bluetooth Name Sticker CMIIT ID check in this LINK
Console serial number inside firmware must be compliant with serial number on traceability sticker (checking with Machine Keyflow menu)
ACCEPTANCE CRITERIA
Stickers are ok, traceability is ok

Chest-belt

7.1. Datasheet

DECATHLON CONTROL
Using CY heart-rate simulator jig.
Without tablet and smartphone put on the console tablet holder :
The accuracy required is +/- 5 BPM value when the signal is stabilized between the belt and the console. Fluctuation is +/- 3 BPM.
Chest-belt horizontal, facing the front of Console 3 with a distance of 60cm.
With tablet and smartphone put on the console tablet holder:
The accuracy required is +/- 5 BPM value when the signal is stabilized between the belt and the console. Fluctuation is +/- 3 BPM.
Chest-belt horizontal, facing the front of Console 3 with a distance of 60cm. The test has to be done by placing the tablet on its different 4 faces.
ACCEPTANCE CRITERIA
Heart rate is ok with chest-belt

Bluetooth specification

8.1. Technical specification under thi s [LINK] DECATHLON CONTROL
Connect the Console 3 with CY testing APP with Android tablet AND Ios tablet. Activating one or two functions to check if Bluetooth is working. Not necessary to check all the functions. ACCEPTANCE CRITERIA Bluetooth connections with Ios and Android are ok
Important: CY APP is using the same Bluetooth SDK as inside the end-user APP. The SDK is the Bluetooth link between APP and Console. CY APP is reliable to control production.

Console| Bluetooth code|

EquipmentMod el

---|---|---
**DOMYOS CONSOLE 3 BLACK| ** Domyos-Bike-xxxx| 8368168
**DOMYOS CONSOLE 3 BLACK CN| ** Domyos-Bike-xxxx| 8369246
**DOMYOS CONSOLE 3 – B ENERGY| Domos-Bike-xxxx| ** 8363074
**DOMYOS CONSOLE 3 – B ENERGY CN| Domyos-Bike-xxxx| ** 8369237
**DOMYOS CONSOLE 3 BLACK R| ** Domyos-EL-xxxx| 8368167
**DOMYOS CONSOLE 3 BLACK R CN| ** Domyos-EL-xxxx| **** 8369244

DECATHLON CONTROL
Check the Bluetooth code written on the sticker corresponds to the console Bluetooth code pairing. Check the EquipentModel Bluetooth code is correct (using CY testing App) ACCEPTANCE CRITERIA OK / not OK
Important: CY APP uses the same Bluetooth SDK inside the end-user APP. The SDK is the Bluetooth link between APP and Console. CY APP is reliable to control on production.

CMIIT_FCC_IC Label

CMIIT ID check in this LINK
CMIIT_FCC_IC Label Documents
CMIIT ID: 2016DP5352
9.1. FCC Statement FCC
15.21 Information to user
Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC 15.105 Information to the user (Class B)
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with radio frequency exposure limits set forth by the FCC for an uncontrolled environment. This device must not be co-located or operating in conjunction with any other antenna or transmitter.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
9.2. IC Statement
IC RSS-Gen 8.4 User Manual Notice for Licence-Exempt Radio Apparatus This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with radio frequency exposure limits set forth by the Innovation, Science, and Economic Development Canada for an uncontrolled environment. This device must not be co-located or operating in conjunction with any other antenna or transmitter.