Numatic HVR200-11 Vacuum Cleaner Henry Instruction Manual

Numatic HVR200-11 Vacuum Cleaner Henry

Product Information

Product Usage Instructions

Assembly
To assemble the product, follow the instructions below:

1. Connect the wand docking tool tidy to the wand.
2. Fit the face onto the main body of the machine.
3. Fit the floor tool onto the end of the wand.
4. Attach the ECO 190 brush to the machine.
5. Insert the TriTex filter and HepaFlo dust bags into their respective compartments.

Power On Indicator Light
The power-on indicator light is located on the machine and indicates whether the machine is powered on or off.

Cleaning and Maintenance
To keep the machine in optimal condition, follow these guidelines:

• Keep the machine clean, including hoses and tubes.
• Ensure the dust bag and filters are fitted properly.
• Regularly examine the power cord for any damage.
• Check the dust bag frequently and empty it when necessary.
• Inspect the filters and clean them if dirty.

Additionally, perform the following maintenance tasks

• Check for any worn or damaged parts and replace them immediately.

WEEE Legislation
To comply with WEEE Legislation (Waste, Electrical and Electronic Equipment), follow these guidelines:

• Sort the vacuum cleaner, accessories, and packaging for environmentally friendly recycling.
• Do not dispose of the vacuum cleaner into household waste.
• Collect and send vacuum cleaners that are no longer suitable for use for recovery in an environmentally friendly manner.

Personal Protective Equipment (PPE)
Depending on the operation, certain PPE may be required. Consider the following:

• Ear Protection
• Safety Footwear
• Head Protection
• Safety Gloves
• Eye Protection
• Protective Clothing
• Dust / Allergens Protection
• Hi-Viz Jacket
• Caution Floor Sign

Note : Conduct a risk assessment to determine which PPE should be worn.

Mains Leads
The mains leads of the machine should have the following specifications:

• Safety Critical Components H05-V2V2-F 10m x 2 Core x 1.00 mm2

Information for Dry Use Vacuum Cleaners
Ensure that the filtration system fitted to the machine is suitable for the material being collected. This vacuum cleaner is intended for indoor use in the collection of dry materials. The machine should be stored indoors only. Do not insert any liquids or scented beads into the top filter of the machine, as it can be dangerous and may damage the machine, potentially invalidating the warranty.

Contact Information
If there is a problem or breakdown, contact your Numatic dealer or the Numatic Technical helpline at +44 (0)1460 269268.

Kit XS0

Assembly

Using your machine

Cleaning

Wand docking

Cleaning the Floor Tool

Fitting the Face

Removing the Face

Schematic Diagram

Replacement parts

2

3

4

5

6

7

8

9

10

| Model
Voltage / Alternating Current
Frequency
Rated Input Power
Weight
WEEE Logo
Protection Class 2 Symbol
Approval Mark
Machine yr/wk Serial Number

Rating Label

About your machine

TriTex Filter

604165| TriTex Filter
HepaFlo Dust Bags
909291| NVH 1CH (Pack of 3)
907076| NVH 1CH (Pack of 5)
907075| NVH 1CH (Pack of 10)

Daily
Keep the machine clean, including hoses and tubes. Ensure the bag and filter are fitted. Regularly examine the power cord. Check dust bags frequently. Check if the filters are clean.

Weekly – as daily and
Check for any worn or damaged parts and replace them immediately.

Maintenance

WEEE Legislation (Waste, Electrical, and Electronic Equipment) Vacuum cleaners, accessories, and packaging should be sorted for environmentally – friendly recycling.

(Only for UK/EU Countries)
Do not dispose of vacuum cleaners into household waste! According to the European Directive 2012/19/ EU on waste electrical and electronic equipment and its incorporation into national law. Vacuum cleaners that are no longer suitable for use must be separately collected and sent for recovery in an environmentally – friendly manner.

PPE (personal protective equipment). That may be required for certain operations

NOTE: A risk assessment should be conducted to determine which PPE should be worn. Failure to rectify the problem or in the event of a breakdown contact your Numatic dealer or the Numatic Technical helpline at +44 (0)1460 269268

Information for DRY use Vacuum cleaners

WARNING
Read the instruction manual before using the machine. Operators shall be adequately instructed on the use of their machines. As with all electrical equipment, care and attention must be exercised at all times during use, in addition to ensuring that routine and preventative maintenance is carried out periodically to ensure safe operation. Failure to carry out maintenance as necessary, including the replacement of parts to the correct standard could render this equipment unsafe and the manufacturer can accept no responsibility in this respect. Maintenance should only be carried out by a qualified person.

This machine is for DRY USE only and must not be stored outside or used in wet conditions. The machine shall be disconnected from the main power by removing the plug from the power supply socket during cleaning or maintenance and when replacing parts or converting the machine to another function. Only use the socket outlet on the machine for purposes specified in the instructions (if fitted). This machine is not to be used by children or persons with reduced physical, sensory, or mental capabilities, or lack of experience or knowledge. This appliance is intended to be cleaned and maintained by an adult. Children being supervised are not to play with the machine. This machine is not a toy. This machine is not suitable for picking up hazardous or explosive dust. Contact your local distributor if you require a machine capable of performing these tasks.

CAUTION
Ensure that the filtration system fitted to the machine is suitable for the material being collected. This vacuum cleaner is intended for indoor use in the collection of dry materials. This machine should be stored indoors only.

NOTES

• The primary use for this machine is commercial, for example in hotels, schools, hospitals, factories, shops, and offices.
• This product complies with the requirements of clause 20 of IEC/EN 60335-2-69 Stability and Mechanical Hazards.
• This vacuum cleaner is fitted with a thermal protection device. If the vacuum cleaner stops working, remove the plug from the wall before investigating where the fault lies.
• If the vacuum cleaner has a blockage, switch it off, remove the plug from the power socket, and inspect the floor tool, tubes, and hose for debris. If the floor tool, tubes, and hose are clear, replace the dust bag and clean the filter.
• The vacuum cleaner should be inspected after use for damage.
• The vacuum cleaner should be stored in a dry place.
• When moving from one place to another, consider the weight of the machine

DO

• Keep your machine clean including hoses and tubes.
• Change dust bags frequently.
• Keep filters clean.
• Keep the diff user filter (where fitted) clean.
• Use filter bags, they will enhance performance and help keep the machine clean.
• Use a Numatic Original filter bag under fine dust conditions.
• Keep hoses and tubes clear.
• Replace any worn or damaged parts immediately.
• Only use the brushes provided by the machine. The use of other brushes may impair safety.
• Regularly examine the power cord. If damage is found such as cracking or aging the power cord must be replaced by a qualified person.
• Only replace the power cord with the correct Numatic-approved replacement part.

DO NOT

• Pull on the cable to unplug the machine from the power supply.
• Use to suck up hot ashes or lighted cigarette ends.
• Use steam cleaners or pressure washers to clean the machine or use in the rain.
• Immerse in water for cleaning.
• Attempt machine maintenance or cleaning unless the power supply plug has been removed from the supply outlet.
• Use in wet environments or to collect wet materials.
• Under any circumstances place foreign objects including (but not limited to) air fresheners, air freshener capsules, or scented beads of any type into the top filter of the machine.
• Doing so can be dangerous and risk damage to the machine and may invalidate the machine’s warranty

Data

We, Numatic hereby declare under our sole responsibility, that the above- mentioned product(s) is/are in conformity with the following directives and standards

H)
UKCA Declaration of Conformity

Manufacturer:| Numatic International Limited Chard

Somerset TA20 2GB

www.numatic.co.uk

Product:| HVR, HVN, NVR, NSR, NVR, HET, NRV, EVR, HVX, HMR, HHR, HVC, HEC, HEP, HRP, HDK, HLX, PET, PEH, HRR,

HVT, PCH, HPC

Description:| Vacuum Cleaner – Commercial – Dry
We, Numatic hereby declare under our sole responsibility, that the above- mentioned product(s) is/are in conformity with the following directives and standards.

The specification is subject to change without prior notice www.numatic.com © Numatic International Limited

References

• Numatic International Danmark
• Zuverlässige, leistungsstarke und nachhaltige Reinigungskonzepte | Numatic International Schweiz AG
• Home - Numatic International
• Commercial Start Page
• Home - Numatic International
• Zuverlässige, leistungsstarke und nachhaltige Reinigungskonzepte | Numatic Deutschland
• Matériel de nettoyage professionnel - Numatic - Des performances dignes de confiance
• Numatic

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>