HAZET 2154 N-20 Digital Caliper 150 mm User Manual

: June 8, 2024
: HAZET

Table of Contents

Introduction
Elements of the device
Included
Storage
- Disposal
Technical Data
Maintenance and Cleaning
EC Declaration of Conformity
Application
Customer Support
Documents / Resources

HAZET 2154 N-20 Digital Caliper 150 mm

2154 N-20 Digital Caliper 150 mm

Introduction

For Your Safety
Before starting up the digital caliper, read this application note.
Do not use force!
The digital caliper may be damaged if force is used.

Elements of the device

Elements of the device
① Measuring Jaws
② Slide
③ Graduation
④ Switch mm / Inch
⑤ Set Screw
⑥ LCD Display
⑦ Battery Cover
⑧ Data Output Connector
⑨ On/Off Switch
⑩ Reset Button
⑪ Depth Gauge
⑫ Friction Roll

Included

Digital Caliper
Silver oxide button cell SR 44 1.55 V

Storage

**** The digital caliper has to be stored according to the following conditions:

Do not store outdoors.
Store in a dry and dust-free place.
Do not expose to liquids or other aggressive substances.
Storage temperature: 0° up to +40°C
Relative air humidity: max. 80%

Disposal

Dispose of the device according to the regulations for work safety and environmental protection. Components can be recycled.
Dispose of batteries according to local and national regulations.
Metal parts can be scrapped
Plastic parts can be recycled.

Technical Data

Length 234 mm
Measuring Range 0 – 150 mm / 0 – 6˝
Resolution 0.01 mm / 0.0005
Error Margin 0.03 mm / 0.001˝
Max. Measuring Speed 1.5 m/sec / 60˝/sec
Working Temperature
of LCD display 0° – +40° C
Ideal Working
Temperature +20° C
Relative Air Humidity 0 – 80%

Maintenance and Cleaning

If the LCD display is blinking, the battery has to be replaced.
Store digital caliper in a clean and dust-free place.
Do not expose the digital caliper to shocks, impacts or liquids as they might affect the function and may damage the digital caliper.
The surfaces should only be cleaned with a dry cotton cloth.
Do not use acetone or alcohol for cleaning.

EC Declaration of Conformity

See www.hazet.de

Application

For inside and outside measuring. Measuring range 0 – 150 mm.

The following harmonised standards were applied:
EN IEC 61000-6-2:2019
EN IEC 61000-6-4:2019
Person authorised to compile the technical file: Volker Grünberg, Tel.: +49 (0) 2191 792 319

Signature of the manufacturer:

Remscheid, august 25th, 2021

The technical details can be viewed in quality assurance at HAZET Remscheid, GERMANY

Date of the CE marking: October 7th 2016

Customer Support

HAZET -WERK Hermann Zerver GmbH & Co. KG
10 04 61
42804 REMSCHEID
GERMANY
+49 (0) 21 91 / 7 92-0
+49 (0) 21 91 / 7 92-400 International
hazet.de
info@hazet.de

Documents / Resources

| HAZET 2154 N-20 Digital Caliper 150 mm [pdf] User Manual
2154 N-20 Digital Caliper 150 mm, 2154 N-20, Digital Caliper 150 mm, Caliper 150 mm
---|---