Secmote 1850ML Electric Quiet Dehumidifier User Manual
- June 14, 2024
- Secmote
Table of Contents
Secmote 1850ML Electric Quiet Dehumidifier User Manual
Safety Notice
- Please read the user manual carefully before using the dehumidifier.
- Please use the same power voltage with the dehumidifier marked.
- Please place the dehumidifier on the level and stable ground, avoiding direct sunlight and close contact with heating equipment.
- Do not block the air inlet and outlet in any way.
- Do not modify, damage, excessively bend, or pull the dehumidifier power cord.
- Do not connect the power plug or operate the dehumidifier with wet hands.
- When using the dehumidifier, please close the doors and windows to prevent humid air from entering the room.
- Make sure there are no obstacles within 5OCM when using the dehumidifier.
- Dehumidifier recommended working environment: humidity > 40%, temperature > 59°F.
- Please do not disassemble the dehumidifier by yourself.
- Please do not open the outer covering while the dehumidifier is running.
- Do not disassemble the buoyancy assembly in the water tank, otherwise the dehumidifier will not work.
- Do not stop the dehumidifier by pulling out the power cable.
- Please keep the dehumidifier unplugged when cleaning, moving, disassembling and not using for a long time.
- Do not allow children to operate the dehumidifier.
- Do not immerse the device in water, as this will damage the device.
- Do not climb on or sit on the dehumidifier.
- Never insert your finger or other foreign objects into grills or openings, take special care to warn children of these dangers.
- Do not drink dehumidified water or feed animals and plants with it.
- If the dehumidifier emits strange noises, smells or smoke, please disconnect the power and contact us.
- Please contact us for help firstly if the dehumidifier has any problem.
- E-mail: Secmote-service@outlook.com
Product Introduction
Front Side
**Top Side
Black Side**
Top Side
- Wind Speed
- Power
- Light Switch
Operational Instructions
General Operation
-
Before turning on the dehumidifier, make sure that the power cord is connected and the power supply is normal.
-
Please make sure that the water tank has been fully inserted into the base.
Note: If the top blue indicator flashes and the water tank LED lights red after turning on the power, it means that the water tank is not installed correctly, please reinstall the water tank. -
Turn on the power button on the machine, and the blue light of the air outlet will light up, indicating that the dehumidifier is turned on.
-
Turn off the power button on the machine, the display light goes out, and the dehumidifier stops working.
Drainage
- When the tank is full, the dehumidifier will automatically shut down. At this time, the blue indicator light on the top flashes, and the water tank LED light turns red.
- Please turn off the dehumidifier, take out the tank, open the cover of the water tank, and drain the accumulated water.
- Reinstall the water tank, turn on the power, and the dehumidifier starts working again.
Key Description
- Wind Speed
- Power
- Light Switch
Light Switch:
- The breathing light is turned on by default, and lights up when the dehumidifier is turned on.
- Click the light switch to lock the current color according to your preference.
- Click the light switch again to turn off the breathing light.
Power
Control turning on and turning off of the dehumidifier.
Wind Speed:
- The default is the normal dehumidification mode, which is suitable for daily home environment.
- After clicking, it will enter the sleep dehumidification mode, the wind speed will be reduced, and the noise will be reduced.
- Click again to restore normal dehumidification mode.
Care&Cleaning
Cleaning The Machine
- Please turn off the dehumidifier and disconnect the power before cleaning.
- Wipe the surface with a soft cloth, please do not rinse ith water directly.
- When the dirt is serious, use a soft cloth to dip a small amount of neutral detergent, wipe the dirty part, do not use bleach or abrasive.
Cleaning Water Tank
- Please clean the tank every few weeks to prevent mold and bacteria growth.
- Clean the inside of the water tank with a soft cloth or rinse with clean water.
- Do not disassemble the buoyancy components in the water tank, otherwise the dehumidifier cannot be used normally.
- The water tank can be used after drying.
Non-use for Long-term
- Disconnect the power and pull out the power socket.
- Completely empty the water tank, ventilate for a period of time, and ensure that the dehumidifier and the water tank are in a dry state.
- Properly store the power cord.
- Store the dehumidifier upright in a dry and well-ventilated place. It is recommended to use the original outer box for storage.
Troubleshooting
| QUESTION | POSSIBLE REASON | SOLUTION |
|---|
The indicator light flashes,
the LED color light is red| Water tank full| Empty the water tank.
Incorrect position of tank| Reinstall the tank.
Tank buoyancy assembly stuck| Pull the buoyancy assembly to move
it smoothly.
Poor dehumidification| Poor air circulation| Alow 50 cm of space around the
machine.
Air inlet and outlet blocked| Clean the air inlet and outlet of the
machine.
low ambient temperature| Change the place of use.
Not enough time to remove moisture| Observe after leaving the machineon for
more than 1 hour.
The room is ventilated or there is a
source of water vapor| Check that al doors, windows and
other openings are securely closed.
Unable to start| The power socket is not installed| Make sure the dehumidifier
isplugged in and turned on.
Room power failure| Check house fuse/breaker box.
Dehumidifier tank is full| Empty the water tank.
Incorrect tank position| Reinstall the tank.
Loud noise| Dehumidifier not placed horizontally| Place the machine in a
horizontal
and stable position.
Air inlet and outlet blocked| Clean the air inlet and outlet of the
machine.
ANY QUESTIONS, PLEASE CONTACT US.
Anhua Chuangyou Business Management Co., Ltd.
No. 129, Building 6, Phase Il, Century New City, Xuefenghu Avenug Chengnan
District, Dongping Town, Anhua County, Yiyang City, Hunan Province, China
E-mail. Secmote-service@outlook.com