Wayfair VE06 doors with 1 1 2Inch 38mm holes Instruction Manual
- August 21, 2024
- wayfair
Table of Contents
Instructionsfordoorswith1-1/2”(38mm)holes
Temporarily insert latch bolt.
If your latch bolt cannot be inserted all the way to the end, you need to extend the latch hole. Follow the instruction in Step 2. ff the latch bolt sits property, skip to Step 3.
(OPTIONAL):
If you do not need to extend the latch hole, go to Step 3.
For a 1-1/2″ (38 mm) bore hole, use a 1″ (25.4 mm) Drill Bit to extend the
latch hole at least 13/64″ (5 mm) deep. No need to extend the latch hole for a
2-1/8″ (54 mm) bore hole. After extending the tatch hole, insert the Latch
Bolt again to ensure it fits correctly.
Test latch bolt operation.
Install the Latch Bolt and rotate it with a screwdriver to confirm smooth rotation.
(OPTIONAL): If the latch bolt operation is smooth, skip to nextstep.
If it cannot rotate smoothly because the door hole is too smal,
Remove the Latch Bolt and chisel out a small channel at the top of the hole to
give the cam of the Latch Bolt room to rotate.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>