wayfair Wade Logan Bloomington Bed Instruction Manual
- June 8, 2024
- wayfair
Table of Contents
wayfair Wade Logan Bloomington Bed
DEAR CUSTOMER,
Thank you for choosing our product. Please read this manual carefully before assembling or using the product, to avoid damage caused by improper use. If the product is passed on to third parties, this manual has to be passed on along with the product. For any question don’t hesitate to contact us.
PARTS LIST
Assembly
Before your installation, please make sure that you have all the parts listed on the manual. If you find something missing, stop installing and contact your supplier immediately
Attention: Please screw into the edge of the bed, not the wooden strips.
Attention: Please screw into the edge of the bed, not the wooden strips.
Note: The sensor needs to be exposed to facilitate the operation of the controller
OPERATION
24 Button panel and connection instructions TY-IR-DS24-001
Before you using the remote controller, please remove the transparent plastic, which is designed to disconnect the battery.
Wiring diagram
Descriptions for remote control buttons
The LED controller is operated via the IR remote control. There are 24 buttons on the remote control and the function of each button is as follows:
Brightness + or Speed +
|
Brightness – or Speed –
|
Off
|
On
---|---|---|---
Static red
|
Static green
|
Static blue
|
Static White
Static orange
|
Static light green
|
Static sea blue
|
Blink for 2 seconds then gradual change colors for 5 seconds.
Static light orange
|
Static green blue
|
Static violet
|
Keep blinking and changing colors.
Static light yellow
|
Static turquoise
|
Static dark red
|
Gradual change colors
Static yellow
|
Static cyan
|
Static magenta
|
Blink for 1 second then gradual change colors for 5 seconds.
The buttons and on the remote control have two functions. In static mode they are the brightness adjustment buttons. In dynamic mode they are the speed adjustment buttons.
An isolating foil has been placed between the electric circuit and the battery during the production of the remote, to prevent the battery from running out due to buttons being pressed during construction or transport. Please remove the foil before use.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>