ELECOM M-HT1UR Wired Trackball Mouse Instruction Manual

: August 20, 2024
: ELECOM

Table of Contents

ELECOM M-HT1UR Wired Trackball Mouse
Product Usage Instructions
Names and functions of each part
Using the trackball mouse
Cleaning the trackball
Speciﬁcations
Safety Precautions
Limitation of Liability
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ELECOM M-HT1UR Wired Trackball Mouse

Specifications:

Model: M-HT1UR, HT1UR
Connection: Wired
Resolution: 500 dpi, 1000 dpi, 1500 dpi
Buttons: Left button, Right button, Tilt wheel/pointer speed indicator light, Back button, Forward button, Function buttons

Product Usage Instructions

Using the Trackball Mouse:

Start by inserting the USB connector into a USB port on your PC.
Adjust the pointer speed by sliding the selector to choose between 500 dpi, 1000 dpi, or 1500 dpi.
Clean the trackball by removing it through the ball removal hole for maintenance.
Assign functions to the function buttons using ELECOM Mouse Assistant software.

USB Connector Usage:
Start your PC and ensure it is ready for operations before inserting the USB connector. Insert it into any available USB port on your PC. Make sure to check the connector orientation and insertion location to avoid damage.

Names and functions of each part

ELECOM-M-HT1UR-Wired-Trackball-Mouse-1

Left button
Right button
Tilt wheel/pointer speed indicator light
“Back” button
You can perform the “Back” operation in a web browser.
“Forward” button
You can perform the “Forward” operation in a web browser.
Function buttons
A function can be assigned to each button. No function is assigned at the time of purchase. Download “ELECOM
Mouse Assistant” from the ELECOM website to use its button assignment function.
Trackball
Pointer speed selector
Sliding the selector switches the resolution (pointer speed) between LOW, MID and HIGH.
The current resolution will be indicated by the blinking pointer speed indicator light.
- LOW Blinks once: 500 dpi
- MID Blinks twice: 1000 dpi
- HIGH Blinks three times: 1500 dpi
USB connector (male)
Ball removal hole
Remove the ball for cleaning
Optical sensor (under the ball)

Using the trackball mouse

Start the PC.
Start the PC, and then wait for it to be ready to perform operations.
Insert the USB connector of the product into a USB port on the PC.
Any USB port may be used.
- Be sure to sufﬁciently check the connector orientation and the insertion location.
- If you feel a strong resistance when inserting the USB connector, check that the shape and orientation of the connector is correct. Using excessive force may damage the connector and cause injury.
- Do not directly touch the terminal area of the USB connector.
The driver will be automatically installed, and you will then be able to use the trackball.

Mouse Assistant
Win https://www.elecom.co.jp/r/132.html
Mac https://www.elecom.co.jp/r/133.html

Download “ELECOM Mouse Assistant” from the ELECOM website to use its button assignment and high-speed scrolling functions.

“ELECOM Mouse Assistant” does not support Windows® RT.
The function allocation is not available.

Cleaning the trackball

Push out the ball from behind with your ﬁnger or a pen.
Remove dust off the areas where the three red support balls contact the trackball using a cotton swab.

Take care not to damage the optical sensor when cleaning the area.

Speciﬁcations

Supported OS| Windows® 10, Windows® 8.1, Windows® RT8.1, Windows® 7,

Windows® XP, macOS Sierra 10.12

(Update for each new version of the OS or the installation of a service pack might be required.)

---|---
Resolution| 500/1000/1500 dpi (switchable)
Interface| USB
Dimensions (W × D × H)| approx. 115 x 182 x H 58 mm/4.52 x 7.16 x 2.25 in.
Cable length| 1.5 m/5 ft
Operating temperature/humidity| 5°C to 40°C (41°F to 104°F)/90%RH or less (without condensation)
Storage temperature/humidity| -10°C to 60°C (14°F to 140°F)/90%RH or less (without condensation

Safety Precautions

Prohibited action
Mandatory action
Situation that needs attention

WARNING

If a foreign object (water, metal chip, etc.) enters the product, immediately stop using the product, remove the product from the PC. If you continue to use the product under these conditions, it may cause a fire or electric shock.
If the product is behaving abnormally, such as by generating heat, smoke, or a strange smell, immediately stop using the product, shut down the PC, and then sufficiently check whether the product is generating heat while being careful to avoid being burned.
Then, remove the product from the PC . After that, contact the retailer from whom you purchased the product. Continuing to use the product under these conditions may cause a fire or electric shock.
Do not drop the product or otherwise subject it to impacts.
If this product is damaged, immediately stop using it, remove the product from the PC. After that, contact the retailer from whom you purchased the product. Continuing to use the product while it is damaged may cause a fire or electric shock.
Do not attempt to disassemble, modify or repair this product by yourself, as this may cause a fire, electric shock or product damage.
Do not put this product in fire, as the product may burst, resulting in a fire or injury.
Do not insert or remove the connector with wet hands. Also, do not make alternations to or forcefully bend the connector.
Doing so may cause a fire or electric shock.

CAUTION

Do not place this product in any of the following environments:

In a car exposed to sunlight, a place exposed to direct sunlight, or a place that becomes hot (around a heater, etc.)
In a moist place or a place where condensation may occur
In an uneven place or a place exposed to vibration In a place where a magnetic field is generated (near a magnet, etc.)
In a dusty place

This product does not have a waterproof structure. Use and store this product in a place where the product body will not be splashed with water or other liquid.

Rain, water mist, juice, coffee, steam or sweat may also cause product damage.
Only use this product with PCs and video game systems.
Do not use this product with any device that may significantly be affected in the case of this product malfunctioning.
If this product is not going to be used for one month or longer, remove it from the PC.
When you no longer need to use this product, be sure to dispose of them in accordance with the local ordinances and laws of your area.

Cleaning the Product
If the product body becomes dirty, wipe it with a soft, dry cloth.

Use of a volatile liquid (paint thinner, benzene, alcohol, etc.) may affect the material quality and color of the product.

Limitation of Liability

In no event will ELECOM Co., Ltd be liable for any lost profits or special, consequential, indirect, punitive damages arising out of the use of this product.
ELECOM Co., Ltd will have no liability for any loss of data, damages, or any other problems that may occur to any devices connected to this product.

FAQ:

Q: How do I adjust the pointer speed on the trackball mouse?
A: Slide the pointer speed selector to switch between LOW, MID, and HIGH resolutions corresponding to 500 dpi, 1000 dpi, and 1500 dpi respectively.

Q: How do I clean the trackball?
A: Remove the trackball through the ball removal hole for cleaning purposes.

Q: How do I assign functions to the function buttons?
A: Download ELECOM Mouse Assistant from the ELECOM website and use it to assign functions to the function buttons.

Compliance status
www.elecom.co.jp/global/certiﬁcation/

Xin tham khảo theo hiện trạng tuân thủ RoHS: www.elecom.co.jp/global/certification/

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditios: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
In order to make improvements to this product, the design and speciﬁcations are subject to change without prior notice.

Responsible party
ELECOM USA, Inc.
4041 MacArthur Blvd Suite 400, Newport Beach, CA 92660 USA elecomusa.com
WEEE Disposal and Recycling Information
This symbol means that waste of electrical and electronic equipment (WEEE) should not be disposed as general household waste. WEEE should be treated separately to prevent possible harm to the environment or human health. Consult your retailer or local municipal ofﬁce for collection, return, recycle or reuse of WEEE.

European Authorized Representative : VISHTEC ltd
3rd ﬂoor office 5, Plovdiv 2 Liuben Karavelov bul, 4002 Bulgaria
compliance@vish-tec.com

Trademark and name of the manufacturer:

ELECOM CO., LTD.
Fushimimachi 4-1-1, Chuo-ku, Osaka City www.elecom.co.jp/global/

Unauthorised copying and/or reproducing of all or part of this manual is prohibited.
The specifications and appearance of this product may be changed without prior notice for product improvement purposes.
When exporting this product, check the export regulations for the country of origin.
Windows, Windows Vista and the Windows logo are trademarks of the Microsoft group of companies.
Mac OS and Macintosh are trademarks of Apple Inc., registered in the U.S. and other countries.
Company names, product names, and other names in this manual are either trademarks or registered trademarks.

Global Support

ELECOM-M-HT1UR-Wired-Trackball-Mouse-6

www.elecom.co.jp/r/s536

A customer who purchases outside Japan should contact the local retailer in the country of purchase for enquiries.
In “ELECOM CO., LTD. (Japan)”, no customer support is available for enquiries about purchases or usage in/from any countries other than Japan. Also, no foreign language other than Japanese is available. Replacements will be made under stipulation of the Elecom warranty.

Wired Trackball Mouse
Manual, Safety precautions, and Compliance with regulations 3rd edition, December 25, 2023