ANGWATT CS1 Electric Scooter User Manual

ANGWATT CS1 Electric Scooter User Manual

SAFE RIDING GUIDELINES

This chapter has been created to help you understand the safe use and maintenance of ANGWATT CS1 electric scooter.

• Do not use the scooter on rainy days to avoid rainwater entering the battery compartment and damaging the scooter.
• Before driving the scooter, please make sure the scooter’s screws are tightened and the brake system is working properly.
• Persons without excellent vision, balance, coordination, reflex, muscle and bone strength and good decision-making capabilities should not use this product.
• The user of this product assumes ALL risks associated with its use. To minimize these RISKS, the user must wear safety helmet, goggles, gloves, elbow and knee pads and appropriate footwear.
• This manual contains important safety information. It is your responsibility to review this information and make sure that all riders understand all warnings, cautions, instructions and safety. We’re not liable for incidental damages or consequential damages due directly or indirectly to the use of this product.
• Riding the electric scooter can be a hazardous activity. Certain conditions may cause the equipment to fail without fault of the manufacturer. Like other electric products, the scooter can and is intended to move and it is therefore possible to lose control, fall off and/or get into dangerous situations that no amount of care, instruction or expertise can eliminate. If such things occur you can be seriously injured or die, even when using safety equipment and other precautions. RIDE AT YOUR OWN RISK AND USE COMMON SENSE.

ALWAYS FOLLOW THE LOCAL LAWS AND REGULATIONS.

• Understand your local laws permitting the use of Electric scooters, please use this product within the scope of the law.
• Never ride your scooter in conditions of poor visibility.
• Do not do stunts, wheelies or jumps. They will increase your chances of injury and damage your ANGWATT CS1.
• Never carry passengers.

PACKING LIST

Package Contents

• 1 X Electric Scooter
• 1 X Manual
• 1 X Charger
• 1 X Installation Tool
• 2 X NFC Cards

SPECIFICATION

ANGWATT CS1 PRODUCT STRUCTURE

HANDLEBAR STRUCTURE

FEATURES & FUNCTIONS

1. How to turn on the electric scooter: First press the “Power Switch”, then touch the screen with the “NFC card”, hear a beeping sound, and then the “Meter” turns on, indicating that the electric scooter has been started. (Note: The entire NFC card should tightly attached to the Meter. After successfully turning on the electric scooter, you can take it away)

2. How to turn off the electric scooter: Touch the screen with the “NFC card”, hear a beeping sound, and the “Meter” turns off, indicating that the electric scooter has been turned off.
   (Note: There is no need to press the “Power Switch” to turn off the electric scooter.)

3. How to change the speed gear: Increase the speed gear by pressing “+”, and decrease the speed gear by pressing “-“.

4. About the “Drive Transfer Switch” button: ANGWATT CS1 is a single-motor electric scooter, and this button is invalid for CS1.

5. How to turn on the lights: Press “Light Switch” to turn on the headlights, side lights, and front and rear riding lights. Turn on the turn signal by pressing the “turn signal button” and turn on the brake light by pressing the “handbrake”.

6. How to copy the NFC card key to your phone: You can turn on the NFC card copy function of your phone, get close to the NFC card that needs to be copied, and add the NFC key to your phone. (Note: Only 3 NFC keys can exist. If you copy the NFC key to a second phone, one NFC card will become invalid). If you have questions about copying NFC keys, you can contact the seller for a video tutorial.

7. How to switch the display of single mileage/total mileage: Press “Power Switch” after turning on the electric scooter to switch the display of single mileage or total mileage.

8. How to enter the engineering mode: After turning on the electric scooter, press “+”and “-” at the same time for 3-5 seconds to enter the engineering mode and modify the P value of the scooter.

9. How to modify the P value in engineering mode: On the engineering mode page, short press “Power Switch” to switch the P value. Short press “+” or “-” to change the parameters of P value. After selecting the parameter of the required P value, press “Power Switch” to switch to the n ext P value. After all, you can press “+” and “-“again for 3-5 seconds to exit engineering mode.

METER P VALUE SETTING INSTRUCTIONS

• P1: Mileage (unit: 0:km, 1: mile).
• P2: wheel diameter (unit inc, accuracy: 0.1).
• P3: Voltage level (36V, 48V, 52, 60, 72 V).
• P4: Sleep time (3, 5, 10; unit minutes).
• P5: Number of speed measuring magnets (range: 1-6).
• P6: Speed limit, range 0-100 (this value is the maximum speed percentage, not a speed value).
• P7: Zero start, non-zero start setting, 0: zero start; 1: non-zero start.
• P8: This scooter is not suitable, please do not change it.
• P9: This scooter is not suitable, please do not change it.
• P10: This scooter is not suitable, please do not change it.
• P11: This scooter is not suitable, please do not change it.
• P12: Controller current limit setting (range: 1-80A).
• P13: Controller under voltage value.
• P14: Cruise control (0 does not enable cruise control/1 enables cruise control).After this mode is turned on, pressing the accelerator continuously will fix the current speed, and pressing the accelerator briefly will cancel the cruise control.
• P15 is not suitable for this scooter, please do not change it.

METER INTRODUCTION

STORAGE AND MAINTENANCE

Maintenance and cleaning

If you see stains on the scooter’s body, wipe them off with a damp cloth. If the stains won’t scrub off, put on some toothpaste, and brush them with a toothbrush, then wipe them off with a damp cloth. If you see scratches on plastic parts, use sandpaper or other abrasive materials to polish them.

Notes: do not clean the scooter with alcohol, gasoline, kerosene or other corrosive and volatile chemical solvents to prevent dire damage. Do not wash the scooter with a high-pressure water spray. During cleaning, make sure that the scooter’s turned off, the charging cable is unplugged, and the rubber flap is closed as water leakage may result in electric shock or other major problems.

Storage

When not using the scooter, place it in a dry and cool indoor environment free of sundries and flammable items. Do not leave it outside for a long time. Excessive sun exposure, high and low temperatures can accelerate tire aging, and rain can damage the life of the scooter and battery.

Battery maintenance

1. Use original battery packs, use of other models or brands may bring about safety issues;

2. Do not touch the contacts. Do not dismantle or puncture the casing.
   Keep the contacts away from metal objects to prevent short circuit which may result in battery damage or even injuries and deaths;

3. Use original power adapter to avoid potential damage or fire;

4. Mishandling of used batteries may do tremendous harm to the environment. To protect natural environment, please follow local regulations to properly dispose used batteries.

5. After every use, fully charge the battery to prolong its lifespan.

6. Recommended charging time About 8 hours.

7. Please keep an eye on the scooter during charging to avoid overcharging.
   Do not place the battery in an environment where the ambient temperature is higher than 50°C or lower than -20°C (e.g., do not leave the scooter or the battery pack in a car under direct sunlight for an extended time). Do not throw the battery pack into fire as it may lead to battery failure, battery overheating, and even another fire. If the scooter is expected to be left idle for more than 30 days, please fully charge the battery and place it in a dry and cool place. Keep in mind to recharge it every 60 days to protect the battery from potential damage which is beyond limited warranty.

Always charge before exhausting the battery to prolong the battery’s lifespan. The battery pack performs better at normal temperature, and poor when it is below 0°C. For instance, when it is below -20°C, the riding range is only half or less at normal state. When the temperature rises, the riding range restores.

Note: The built-in intelligent chip will keep a log of its charging and discharging records. The damage caused by prolonged no charge is irreversible and is beyond limited warranty. Once the damage is done, the battery can not be recharged (non-professionals are forbidden to dismantle the battery pack, as it may cause electric shock, short circuit or even major safety accidents).

WARRANTY INSTRUCTIONS

Battery
Controller
Function Parts| The charger| 3 months
Front light
Tail light
Brake light
Brake device
Accelerator
Appearance Parts| Paint Logo| No warranty
Sticker
Mudguard
Other accessories not shown in list

Note:

If you find that the goods are damaged due to transportation, please contact the seller within 3 days. They will send you the corresponding accessories. After more than 3 days, the seller will not be responsible for the damage caused by transportation.

If your scooter is damaged due to improper use (violent use/overload usefimpact damage), this is not covered by the warranty.

If the battery capacity declines by 30% within one year, you can contact us for after-sales maintenance. (If the battery problem is caused by long-term non-charging, man-made damage, water in the battery compartment, etc., itis not covered by the warranty and needs to be repaired at your own expense).

FAQ

Q1: Can | use this scooter product in rainy weather?

A1: You cannot use the scooter on rainy days. If the scooter is damaged due to water entering the battery compartment, you will lose your battery warranty.

Q2: Can I modify my scooter?

A2: You can modify the scooter according to your personal preferences. Of course, if some parts are damaged due to modification, you will lose the corresponding warranty.

Q3: Do you have after-sales points in Europe?

A3: Of course, we currently have a maintenance point in the Czech Republic.

Q4: How can | buy accessories for my scooter?

A4: You can buy it through our partner online store. In the future, we will also develop offline stores, which will give you greater convenience.

Q5: How can | proceed if | need warranty service?

AS5: You can directly contact the seller who sold the product, and we will urge them to provide after-sales service.

Q6: Why are there differences in the speed and voltage values displayed on my center screen and the computer?

AB: Because the circuits connected by the two have delay, a slight difference will not affect your use. If there is a big difference, please contact customer service, we will guide you to adjust.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>