ANGWATT T1 Electric Scooter User Manual

June 13, 2024
ANGWATT

ANGWATT T1 Electric Scooter

ANGWATT-T1-Electric-Scooter-FIG-1

SAFE RIDING GUIDELINES

ANGWATT-T1-Electric-Scooter-FIG-2

This chapter has been created to help you understand the safe use and maintenance of ANGWATT T1 electric scooters.

  • Do not use the scooter on rainy days to avoid rainwater entering the battery compartment and damaging the scooter.
  • Before driving the scooter, please make sure the scooter’s screws are tightened and the brake system is working properly.
  • Persons without excellent vision, balance, coordination, reflex, muscle and bone strength, and good decision-making capabilities should not use this product.
  • The user of this product assumes ALL risks associated with its use. To minimize these RISKS, the user must wear a safety helmet, goggles, gloves, elbow and knee pads, and appropriate footwear.
  • This manual contains important safety information. It is your responsibility to review this information and make sure that all riders understand all warnings, cautions, instructions, and safety. We’re not liable for incidental damages or consequential damages due directly or indirectly to the use of this product
  • Riding an electric scooter can be a hazardous activity. Certain conditions may cause the equipment to fail without the fault of the manufacturer. Like other electric products, the scooter can and is intended to move and it is therefore possible to lose control, fall off, and/or get into dangerous situations that no amount of care, instruction, or expertise can eliminate. If such things occur you can be seriously injured or die, even when using safety equipment and other precautions. RIDE AT YOUR OWN RISK AND USE COMMON SENSE.

ALWAYS FOLLOW THE LOCAL LAWS AND REGULATIONS.

  • Understand your local laws permitting the use of Electric scooters, please use this product within the scope of the law.
  • Never ride your scooter in conditions of poor visibility.
  • Do not do stunts, wheelies or jumps. They will increase your chances of injury and damage your ANGWA TT T1.
  • Never carry passengers.

PACKING LIST

  • T1 Electric Scooter 1 Pc
  • Charger 2 Pcs
  • Installation Tool 1 Pc
  • User Manual 1 Pc
  • Key 2 Pcs
  • Side Light Remote Control 1 Pc
  • CE Certification 1 Pcs

INSTALLATION GUIDE TURN SIGNAL INSTALLATION GUIDE

  • Rear turn signal

    ANGWATT-T1-Electric-Scooter-FIG-3

  • Front turn signal

ANGWATT-T1-Electric-Scooter-FIG-4

  • Rear fender installation guide

ANGWATT-T1-Electric-Scooter-FIG-5

  • Handlebar installation guide

Note: When installing the screws here, do not tighten the individual screws immediately, but tighten the two screws slowly in turn to avoid damage to the screws.

  • Center screen installation guide
    Note: Fix the upper screw with a small wrench, and then tighten the lower screw with a screwdriver of appropriate size.

SPECIFICATION

ANGWATT-T1-Electric-Scooter-FIG-17

MAIN PARTS INTRODUCTION

  • Folding buckle introduction
    • Step 1 Pull down the red button.

ANGWATT-T1-Electric-Scooter-FIG-8

  *  **Step 2** Pull down the silver buckle, at the same time Fold or Unfold the scooter.

ANGWATT-T1-Electric-Scooter-FIG-9
Notice: After folding or unfolding the scooter, please press the red buckle tightly into the groove to avoid loosening.

  • Steering damping introduction
    Adjust the resistance of the damper by rotating the position shown in the picture.

ANGWATT-T1-Electric-Scooter-FIG-10

HANDLEBAR PARTS INTRODUCTION

ANGWATT-T1-Electric-Scooter-FIG-11

  1. Light switch button
  2. Turn signal light button
  3. Horn button
  4. Voltage display
  5. Key hole
  6. Center screen
  7. Computer switch button
  8. Mode selection button
  9. Throttle
  10. Drive conversion button
  11. Handbrake (right)
  12. Handbrake (left)

COMPUTER INTRODUCTION

ANGWATT-T1-Electric-Scooter-FIG-12

  1. Speed gear
  2. Mileage
  3. Start up mode
  4. Speed(mph,kmh)
  5. Power

Center screen introduction

ANGWATT-T1-Electric-Scooter-FIG-13

  1. Turn signal
  2. Speed gear
  3. Speed value
  4. Lighting conditions
  5. Power
  6. Troubleshooting
  7. Voltage value
  8. Mileage

Side light remote control introduction
Please refer to the separate manual

Charging Port Introduction
The charging port is located in the battery compartment, there are two in total, you can choose to use it at the same time, or you can choose to use one alone.

ANGWATT-T1-Electric-Scooter-FIG-14

STORAGE AND MAINTENANCE

Maintenance and cleaning
If you see stains on the scooter’s body, wipe them off with a damp cloth. If the stains won’t scrub off, put on some toothpaste, and brush them with a tooth­brush, then wipe them off with a damp cloth. If you see scratches on plastic parts, use sandpaper or other abrasive materials to polish them. Notes: do not clean the scooter with alcohol, gasoline, kerosene or other corrosive and volatile chemical solvents to prevent dire damage. Do not wash the scooter with a high-pressure water spray. During cleaning, make sure that the scoot­er’s turned off, the charging cable is unplugged, and the rubber flap is closed as water leakage may result in electric shock or other major problems.

Storage
When not using the scooter, place it in a dry and cool indoor environment free of sundries and flammable items. Do not leave it outside for a long time. Excessive sun exposure, high and low temperatures can accelerate tire aging, and rain can damage the life of the scooter and battery.

Battery maintenance

  1. Use original battery packs, use of other models or brands may bring about safety issues;

  2. Do not touch the contacts. Do not dismantle or puncture the casing. Keep the contacts away from metal objects to prevent short circuit which may result in battery damage or even injuries and deaths;

  3. Use original power adapter to avoid potential damage or fire;

  4. Mishandling of used batteries may do tremendous harm to the environment.
    To protect natural environment, please follow local regulations to properly dispose used batteries.

  5. After every use, fully charge the battery to prolong its lifespan.

  6. Recommended charging time

    • Charging with 1 charger: 12~13 hours
    • Charging with 2 chargers: 6~7 hours
  7. Please keep an eye on the scooter during charging to avoid overcharging.

  • Do not place the battery in an environment where the ambient temperature is higher than S0°C or lower than -20° C (e.g., do not leave the scooter or the battery pack in a car under direct sunlight for an extended time). Do not throw the battery pack into fire as it may lead to battery failure, battery overheating, and even another fire. If the scooter is expected to be left idle for more than 30 days, please fully charge the battery and place it in a dry and cool place. Keep in mind to recharge it every 60 days to protect the battery from potential damage which is beyond limited warranty.
  • Always charge before exhausting the battery to prolong the battery’s lifespan. The battery pack performs better at normal temperature, and poor when it is below 0°C. For instance, when it is below -20° C, the riding range is only half or less at normal state. When the temperature rises, the riding range restores.
  • Note:The built-in intelligent chip will keep a log of its charging and discharging records. The damage caused by prolonged no charge is irreversible and is beyond limited warranty. Once the damage is done, the battery can not be recharged (non-professionals are forbidden to dismantle the battery pack, as it may cause electric shock, short circuit or even major safety accidents).

WARRANTY INSTRUCTIONS

ANGWATT-T1-Electric-Scooter-FIG-15 ANGWATT-T1
-Electric-Scooter-FIG-16

Note:

  • If you find that the goods are damaged due to transportation, please contact the seller within 3 days. They will send you the corresponding accessories.
  • After more than 3 days, the seller will not be responsible for the damage caused by transportation.
  • If your scooter is damaged due to improper use (violent use/overload use/impact damage), this is not covered by the warranty.
  • If the battery capacity declines by 30% within one year, you can contact us for after-sales maintenance. (If the battery problem is caused by long-term non-charging, man-made damage, water in the battery compartment, etc., it is not covered by the warranty and needs to be repaired at your own expense).

FAQ

  • Can I use this scooter product in rainy weather?
    You cannot use the scooter on rainy days. If the scooter is damaged due to water entering the battery compartment, you will lose your battery warranty.

  • Can I modify my scooter?
    You can modify the scooter according to your personal preferences. Of course, if some parts are damaged due to modification, you will lose the corresponding warranty.

  • Do you have after-sales points in Europe?
    Of course, we currently have a maintenance point in the Czech Repub­lic.

  • How can I buy accessories for my scooter?
    You can buy it through our partner online store. In the future, we will also develop offline stores, which will give you greater convenience.

  • How can I proceed if I need warranty service?
    You can directly contact the seller who sold the product, and we will urge them to provide after-sales service.

  • Why are there differences in the speed and voltage values displayed on my center screen and the computer?
    Because the circuits connected by the two have delay, a slight difference will not affect your use. If there is a big difference, please contact customer service, we will guide you to adjust.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

ANGWATT User Manuals

Related Manuals