Timago BathTim Bath Bench Instruction Manual
- August 20, 2024
- Timago
Table of Contents
Timago Bath Tim Bath Bench
Specifications
- Seat dimensions: 67 x 41 cm
- Adjustable height: 83-94 cm
- Weight: 4.70 kg
- Maximum capacity: 136 kg
Product Usage Instructions
Assembly
- Step 1: Turn the seat and lay it flat on the ground. Fix the legs one after the other on both sides.
- Step 2: Fix tubes in seat openings. Turn frame with seat on a side. Put backrest frame through openings located at the back of the seat until locking pin clicks.
- Step 3: Put bench on its legs and fix armrest into openings. Secure handle with locking pins.
Height Adjustment
To adjust bench height, press locking pin and set appropriate height for the user and lock it with a pin again. The legs are adjustable in 1 cm increments. All legs have to be set on the same height level.
FAQ
-
Q: What is the maximum weight capacity of the bench?
A: The maximum weight capacity of the bench is -
Q: Where can I find warranty information for the product?
A: All products distributed by Timago International Group are covered by a warranty, and the terms can be found in the warranty card available on their website. Please contact the retailer from whom you purchased the product for more details. -
Q: Can the bench be used in damp rooms like bathrooms?
A: Yes, the bench is recommended for use in shower, bathtub, bathroom, and other damp rooms, both at home and in hospitals.
INSTRUCTIONS FOR USE Bath bench with backrest Product code: Bath Tim
Characteristics
Bath bench with wide seat and backrest is made of durable PCV material. It has 10 levels of height adjustment and armrest that makes it easier to use. Special rubber tips with suction cups and anti-slip tips effectively reduce chances of sliding on wet surfaces, providing better stability.
The set includes:
Backrest made of PCV, seat legs with suction cups – 2 pcs., legs with anti-
slip tips – 2 pcs., mounting tubes – 2 pcs., armrest.
Application
The bath benches are ancillary equipment which helps the user to perform hygienic activities. The bench is recommended to people with reduced mobility which hinders the unassisted performance of daily living activities. Bench is recommended for use in shower, bathtub, bathroom and other damp rooms, at home and hospital.
Assembly
- Step 1. Turn the seat and lay it flat on the ground. Fix the legs one after the other on both sides.
- Legs with suction cups should be mounted on the same side as armrest (picture 1).
Step 2. Fix tubes in seat openings (picture 2). Make sure that both locking pins are locked. Turn frame with seat on a side. Put backrest frame through openings located at the back of the seat until locking pin clicks (picture 3).- Backrest has two level length adjustment (picture 3). Press locking pin and set appropriate length.
- Step 3. Put bench on its legs and fix armrest into openings (picture 1). Secure handle with locking pins.
HEIGHT ADJUSTMENT
To adjust bench height, press locking pin and set appropriate height for the
user and lock it with a pin again. The legs are adjustable in 1 cm increments.
All legs has to be set on the same height level.
Technical data
| Seat dimensions | 67 x 41 cm |
|---|---|
| Adjustable height | 83-94 cm |
| Weight | 4,70 kg |
| Maximum capacity | 136 kg |
Notes
Timago International Group does not bear responsibility of improper use of the
bench, failure to comply safety regulations and misuse.
Maintenance
- Clean the bath bench regularly using only water, sponge and mild detergents for plastic materials such as soap. Dry thoroughly.
- Do not use for cleaning: strong detergents, abrasive agents, bleach, petrol or solvents (it may cause frame damage, visible defects and in consequence – loss of warranty rights).
- Regular inspection of the rubber cap, locking pins, mounting tubes, backrest and seat is recommended.
Storage and transport conditions
Device should not be exposed to direct sunlight, water or moisture.
Warranty information
All products distributed by our company are covered by a warranty, the terms of which are described in the warranty card available on our website. Please contact the retailer from whom you purchased the product. Please, keep in mind that for warranty purposes, the proof of purchase (receipt or invoice) should be retained
Labels
Our complete line of products is available from our distributors.
Learn more at:
www.timago.com.
Thank you for choosing Timago!
Timago International Group
T.: +48 33 499 50 00
F.: +48 33 499 50 11
E.: info@timago.com