Timago AMIGO-1 Aluminium 4 Wheeled Rollator Instructions
- June 16, 2024
- Timago
Table of Contents
Timago AMIGO-1 Aluminium 4 Wheeled Rollator Instructions
1. Characteristics
Four-wheeled, folding frame made of aluminum frame. Coated with paint with a metallic sheen. Equipped with parking brakes, seat with backrest and handy bag. It has full 9” diameter wheels and heightadjustable handles finished with anatomical handgrips. The structure is based on a crossover frame and an oval cross-section of tubes, thanks to which the resistance to axial pressure is significantly increased. The set includes: frame with seat and backrest, shopping bag.
Elements of the rollator:
- a. Handgrip
- b. Parking brake
- c. Adjustment clamp
- d. Brake cable
- e. Seat with handle
- f. Wheel
- g. Seat rail
2. Application
The rollator is designed for patients with reduced mobility who need stable support and help while walking. It is also recommended to the elderly as an aid in keeping balance, improving walking comfort and ensuring safety from falling. The use of the rollator affects positively on the return to activity of the people with locomotion and tilting to erect position problems. It guarantees better stabilization, support and security while walking.
3. Unfolding, folding and adjustment
Unfolding
- To unfold the rollator, grab both handgrips and pull them outward.
- Press down on the seat rails until it is fully unfolded (click of the locking mechanism).
Folding
- To fold the rollator, lift the seat by the handle and pull it up.
- Grab both handgrips of the rollator and press them inward.
Handgrips height adjustment
To adjust the height of the handgrip:
- Press the brake down to set the parking mode and immobilize the rollator (Fig. 1).
- Pull the adjustment clamp (Fig. 2).
- Hold the adjustment clamp and adjust the height of the handles (Fig. 3).
- Release the adjustment clamp to lock the adjusted height of the handles. Pull the handle up and down several times to check the correct height locking (Fig. 4).
- Adjust the height of the second handgrip in a similar manner.
- Both handgrips should be set at the same height.
Brake function
- To stop the rollator, pull the brake handle up toward the handle, then hold.
- When stationary or using the seat, lock the brake with the parking clamp by pulling the brake handle down.
- To release the brake, pull the brake handle upward.
Adjustment of lower brake
- To adjust the brake and increase the tension, unscrew the adjustment screw with the use of appropriate tools and tighten the locking screw by holding the adjustment screw.
4. Technical data
5. Notes
Timago International Group does not bear responsibility of improper use of the rollator, failure to comply safety regulations and misuse.
6. Maintenance
- Clean the frame with damp cloth and dry thoroughly.
- Do not use strong polishing agents due to the damage of protecting coatings.
- Clean the dirt from moving parts of the rollator regularly (hinges, clamping screws, locks).
7. Storage and transport conditions
Device should not be exposed to direct sunlight, water or moisture.
8. Warranty information
All products distributed by our company are covered by a warranty, the terms of which are described in the warranty card available on our website. Please contact the retailer from whom you purchased the product. Please, keep in mind that for warranty purposes, the proof of purchase (receipt or invoice) should be retained. 9. Labels
Our complete line of products is available from our distributors. Learn more at: www.timago.com. Thank you for choosing Timago!
NOTES:
Timago International Group
Spółka z o.o. i Spółka – Spółka komandytowa
ul. Karpacka 24/12
43-316 Bielsko-Biała, Polska
T.: +48 33 499 50 00
F.: +48 33 499 50 11
E.: info@timago.com