Timago TGR-R RR S001 Pedal Exerciser Instruction Manual
- June 2, 2024
- Timago
Table of Contents
Timago TGR-R RR S001 Pedal Exerciser
Specifications
- Base dimensions: 40 cm x 50 cm
- Base height from the ground: 27 cm
- Weight: 2.35 kg
- Maximum capacity: 120 kg
- Frame colour: Black
Product Information
The TIMgym pedal exerciser is designed to assist in rehabilitation and personal recreation for patients with lower limb issues. It is constructed with a powder-coated steel frame, resistance mechanism, anti-slip pads, and foot straps. The exerciser offers a wide range of resistance adjustment through a rotary knob, catering to various patient groups.
Elements of the pedal exerciser:
- a. Pedal exerciser legs (2 pcs.)
- b. Pedal exerciser frame (1 pc.)
- c. Exerciser main mechanism (1 pc.)
- d. Adjustment knob (1 pc.)
- e. Screw with nuts type A (length 20 mm, 2 pcs.)
- f. Screws type B (length 10 mm, 4 pcs.)
- g. Screws washers (6 pcs.)
Product Usage Instructions
Application
The pedal exerciser is suitable for patients with contracture,muscular
atrophy, or those needing motor function restoration. It can be adjusted to
match the patient’s limb fitness level and rehabilitation progress.
Resistance Adjustment
To enhance fitness levels and muscle strength gains, gradually increase
training intensity or duration. Loosen the adjustment knob for light exercises
and tighten it for resistance exercises as needed.
Maintenance
Regularly maintain the technical condition of the pedal exerciser to ensure
optimal performance and longevity.
Storage and Transport
Avoid exposing the device to direct sunlight, water, or moisture. Store and
transport the exerciser in a dry and safe environment.
FAQ
Q: What is the maximum weight capacity of the pedal exerciser?
A: The maximum weight capacity is 120 kg.
Q: Can the resistance be adjusted for different fitness levels?
A: Yes, the exerciser features a rotary knob for a wide range of
resistance adjustment suitable for various patient groups.
Q: Is there a warranty for the product?
A: Yes, all products are covered by a warranty. Please refer to the
warranty card for details or contact the retailer for assistance.
INSTRUCTIONS FOR USE
Pedal exerciser
Product code: TIMgym
Characteristics
The lower limb pedal exerciser is made of a powder-coated steel frame. It
is equipped with resistance mechanism, four anti-slip pads and foot straps. It
has a rotary knob with a wide range of resistance adjustment, making it
suitable for various patient groups. It can be used in hospitals, hospices and
at home as a rehabilitation and personal recreation device.
Elements of the pedal exerciser:
- a. Pedal exerciser legs (2 pcs.)
- b. Pedal exerciser frame (1 pc.)
- c. Excerciser main mechanism (1 pc.)
- d. Adjustment knob (1 pc.)
- e. Screw with nuts type A (length 20 mm, 2 pcs.)
- f. Screws type B (length 10 mm,4 pcs.)
- g. Screws washers (6 pcs.)
Application
The pedal exerciser is designed for patients with contracture or muscular
atrophy caused by long-term immobilisation due to a plaster bandage or
surgery, as well as for patients who need to restore motor functions and re-
learn the correct movement pattern due to damage to the neurological system.
It is possible to adjust the exerciser to the state of limb fitness and to the
progress in rehabilitation owing to resistance adjustment.
Assembly and adjustment
- Insert the pedal exerciser leg into the frame and screw it with 2x B- type screws (placing washers beforehand). Screw the other pedal exerciser leg in a similar way.
ATTENTION: do not tighten the screws all the way.
- Once the legs are mounted to the frame, lightly press the frame to the ground and tighten all 4 mounting screws firmly. This will allow the pedal exerciser legs to level properly.
- Place the main mechanism on the pedal exerciser frame and fasten it with 2x screws and A-type nuts (placing washers beforehand).
- Screw the adjustment knob into the main mechanism.
Resistance adjustment
In order to increase fitness levels and improve muscle work and muscle
strength gains, the training intensity and/or duration of exercise should be
gradually increased.
- To increase the resistance, turn the adjustment knob clockwise.
- To reduce the resistance, turn the adjustment knob anticlockwise.
- When performing low impact exercises, the adjustment knob should be completely unscrewed, whereas when performing resistance exercises, the adjustment knob should be tightened to the desired load.
Usage
- Place the pedal exerciser on the floor and make sure the anti-slip pads are firmly in place to prevent the pedal exerciser from moving.
- Exercises should be carried out in a seated position, the pedal exerciser should be positioned exactly in front of the user so that the hip joint is bent at an angle of no less than 90°.
- Place feet on the pedals and adjust the strap to foot circumference, this will prevent the foot from slipping off the pedal during exercise.
- Set the resistance using the adjustment knob.
Technical data
| Base dimensions | 40 cm x 50 cm |
|---|---|
| Base height from the ground | 27 cm |
| Weight | 2,35 kg |
| Maximum capacity | 120 kg |
| Frame colour | black |
Notes
Timago International Group does not bear the responsibility of improper use of
the pedal exerciser, failure to comply safety regulations and misuse.
Maintenance
Carry out regular maintenance of the technical condition of the pedal exerciser:
- It is recommended to clean the pedal exerciser regularly with a soft cloth and soapy water. After cleaning, dry the pedal exerciser thoroughly with soft cloth.
- Do not use strong polishing agents for cleaning as it may cause damage to the protective coatings.
- Remove impurities from moving elements of the exerciser on an ongoing basis.
Storage and transport conditions
Device should not be exposed to direct sunlight, water or moisture.
Warranty information
All products distributed by our company are covered by a warranty, the terms of which are described in the warranty card available on our website. Please contact the retailer from whom you purchased the product. Please, keep in mind that for warranty purposes, the proof of purchase (receipt or invoice) should be retained.
Labels
Timago International Group
Spółka z o.o. i Spółka – Spółka komandytowa
ul. Karpacka 24/12
43-316 Bielsko-Biała, Poland
T.: +48 33 499 50 00
F.: +48 33 499 50 11
E.: info@timago.com