STARLINK 951672 Standard Pipe Adapter Mount Kit Installation Guide

STARLINK 951672 Standard Pipe Adapter Mount Kit

What’s in the Box

• Pipe Adapter Mount
• Allen key
• Cable Routing Clips 20x

Dimensions

Installation Instructions

1. Download the Starlink App
   Scan the QR code to download the Starlink App.

2. Find Mounting Location
   Your Starlink needs a clear view of the sky so it can stay connected with satellites as they move overhead. Objects that obstruct the connection between your Starlink and the satellite, such as a tree branch, pole, or roof, will cause service interruptions. Use the obstruction tool in the App to ensure you have selected a suitable mounting location.

3. Remove Kickstand
   Squeeze the release tab and pull it away from its fixed location.

4. Route Cable Through Pipe Adapter
   Route the Starlink cable through the opening in the pipe adapter and out the front end.

5. Plug in Cable and Install Pipe Adapter
   Plug the cable into your Starlink. Ensure the plug is fully inserted such that the plug face is flush with the surface. Next, slide the adapter in until it clicks into place.

6. Mount Strlink
   Loosen the screws and slide the Pipe Adapter onto your mounting pipe. Temporarily tighten the screws to stabilize Starlink onto pipe. Connect the other end of the Starlink cable to router and plug in router power.

7. Align Your Starlink
   An alert on the App will show if you need to rotate Starlink to be properly aligned. Click the alert to use the alignment tool.

8. Lock Alignment
   Tighten the screws on the Pipe Adapter to lock your Starlink in place. Ensure your Starlink is firmly attached.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>