Torin ATZ120005R Heavy Duty Jack Stands Owner’s Manual
- August 19, 2024
- Torin
Table of Contents
Torin ATZ120005R Heavy Duty Jack Stands
Product Information
Heavy Duty Jack Stands
- Distributed by / Distribuido por: TORIN INC. Ontario, CA 91761
- Website: www.torin-usa.com/support
Made in China / Hecho en China
Specifications
- Capacity: 12 Ton, 22 Ton
- Lifting Range: 12-5/8 ~ 18-1/8 inches, 13-3/4 ~ 19-11/16 inches
- Capacidad: 12 Toneladas, 22 Toneladas
IMPORTANT: Please read this manual carefully
before use. Failure to follow instructions may result in personal
injury and/or property damage.
Product Usage Instructions
Setup
Place the jack stands on a flat, stable surface ensuring they are securely
positioned.
Adjusting Height
Use the provided mechanism to adjust the lifting range to your desired
height within the specified limits.
Placing Load
Place the load on the jack stands evenly and make sure it is centered to
prevent instability.
Lowering the Load
When lowering the load, do so gradually and ensure all safety precautions
are followed.
Storing
After use, lower the jack stands to their minimum height and store them in
a dry place away from moisture.
Frequently Asked Questions (FAQ)
-
Q: Can these jack stands be used for vehicles over 22 tons?
A: No, it is not recommended to exceed the specified capacity as it may result in damage or failure. -
Q: Are these jack stands suitable for use on uneven surfaces?
A: It is recommended to use them on flat surfaces for stability and safety reasons.
HEAVY DUTY JACK STANDS
OWNER’S MANUAL
INSTRUCTIONS FOR USE
Distributed by / Distribuido por:
TORIN INC.
Ontario, CA 91761
FOR CUSTOMER SERVICE
PARA EL SERVICIO PARA EL
www.torin-usa.com/support
Made in China / Hecho en China
www.torin-usa.com
SPECIFICATIONS
| Capacity | Lifting Range |
|---|---|
| 12 Ton | 12-5/8 ~ 18-1/8 inches |
| 22 Ton | 13-3/4 ~ 19-11/16 inches |
PLEASE READ THIS MANUAL CAREFULLY BEFORE USE
IMPORTANT
Study, Understand and follow all instructions failure to heed this warning may
result in personal injury and/or property damage.
WARNING
Read-Study and understand all warning and operating instructions prior to use.
DO NOT OVERLOAD these jack stands beyond their rated capacity. These jack
stands are designed for use on hard level surfaces only. Center load on saddle
prior to lifting. Use as a matched pair to support one end of a vehicle only.
Stands are not to be used to simultaneously support both ends or one side of a
vehicle. No alterations shall be made to this product. Failure to heed these
warnings may result in damage to jack stands and/or failure resulting in
personal injury or property damage. Inspect before each use. Only attachments
and / or adapters supplied by the manufacturer shall be used.
OPERATING INSTRUCTION:
-
Plan the location of the jack stands in pairs on a smooth, hard, level surface to ensure a balanced load.
-
Position each jack stand under the load so the weight will be exerted on the center of the saddle.
-
Raise the extension tube up to the load. Insert the support pin into the hole closest to the base and completely through both walls of the extension tube.
CAUTION : To prevent personal injury, verify placement of the support pin before lowering a load. -
Slowly and carefully lower the load onto the jack stands.
-
If the load is a vehicle, block wheels to prevent movement.
Visual inspection shall be performed before each use of the stand by checking abnormal condition, such as cracked welds, leaks and damaged, loose, or missing parts if stand is believed to have been subjected to abnormal load or shock inspection shall be made by authorized repair facility. Equipment that appears damage or worn or operates abnormally shall be removed from service until repair. Repair should be made by authorized repair facility. Annual inspection of the stand is recommended and should be made by the manufacturer’s or supplier’s authorized repair facility to ensure that you stand is optimum conditions and that the stand has correct decals and safety labels specified by the manufacturer