exquisit KGC265-70-WS-040E Fridge Freezer with Water Dispenser Instruction Manual

exquisit KGC265-70-WS-040E Fridge Freezer with Water Dispenser

Product Specifications:

• Model: KGC265-70-WS-040E
• Fridge-freezer with Water Dispenser
• 3x Freezer drawers
• Temperature control with OFF setting at 0

Product Usage Instructions

Setting Up and Connecting:

1. Change the door hinge if needed by following the instructions provided.
2. Set up the appliance in a suitable location.
3. Ensure the appliance is leveled properly.

Putting into Operation :

1. Switch the appliance ON/OFF as needed.
2. Store food properly in the fridge and freezer compartments.
3. Follow energy-saving tips provided in the manual.

Service and Maintenance:

1. Clean the appliance regularly using recommended methods.
2. Check and replace the appliance door seal if necessary.
3. Clean the Water Dispenser according to the instructions provided.
4. Defrost the appliance when needed.
5. Replace the Lamp (LED) if it stops working.
6. Decommission the appliance correctly when required.

Operating Noises / Troubleshooting:
Refer to the troubleshooting section of the manual for guidance on common operating noises and issues.

FAQ:

• Q: How often should I clean the Water Dispenser?
  A: It is recommended to clean the Water Dispenser every month to ensure proper hygiene and functioning.

• Q: What should I do if the appliance makes unusual noises?
  A: Refer to the troubleshooting section of the manual to identify the cause of the noise and take appropriate action.

Getting to know your Appliance

Scope of delivery

• 1x Appliance
• 1x Service card
• 1x User Manual
• *) The term appliance is used through the text to refer to refrigerator/freezer.

Refrigerator Compartment

• 3x Glass shelf
• 1x Glass shelf above the vegetable drawer (cannot be repositioned)
• 1x Vegetable drawer
• 3x Door compartments
• 1x Water tank

Freezer Compartment
3x Freezer drawers

Designation

1. Temperature regulator / Light
2. Adjustable glass shelves
3. Glass shelf above the vegetable drawer (cannot be repositioned)
4. Vegetable drawer
5. Freezer drawers
6. Water tank
7. Door compartments

Temperature Regulator

• Position 0 = OFF
• Position 1 – 7 = Cooling levels
• The temperature regulator is located on the right-hand side in the refrigerating compartment.

Water Dispenser
Before first use, clean the water tank thoroughly.

1. Remove the door compartments first.
2. Rinse under running water and dry.
3. Loosen the water tank with the lid and also rinse it under the tap
4. Clip the water tank onto the appliance door.
5. Clip the door compartments onto the appliance door.
6. Fill the water tank with a jug of 2.5 liters of cold water.
7. The water dispenser is ready.
8. Hold a glass under the water dispenser and press gently against the tab.
   Cold water flows out of the water tank.

For your Safety

• For safe and proper use of the appliance, read the instruction manual and other documentation accompanying the product and keep in a safe place for future reference.
• All safety instructions in this instruction manual are marked with a warning symbol. They draw your attention to potential hazards. Be sure to read and observe this information

Explanation of the Safety Instructions

• DANGER
  Indicates a hazardous situation which, if not avoided, will lead to very serious injuries or even death!

• WARNING
  Indicates a hazardous situation which, if not avoided, can lead to very serious injuries or even death!

• CAUTION
  Indicates a hazardous situation which, if not avoided, can lead to minor or moderate injuries!

• ATTENTION
  Indicates a situation which, if not avoided, will lead to material damage.

  • ELECTRIC SHOCK HAZARD!
  • RISK OF SCALDING!
  • FIRE HAZARD!

• Information and instructions to be observed.

• Indicates a list.

• Indicates inspection steps in sequence.

• Indicates work steps in sequence.

• Describes the response of the appliance to the work step.

Intended use

• The appliance is intended for private/household use. It is suitable for refrigerating/freezing food.
  • Do not use the appliance for purposes other than refrigerating/freezing food. The manufacturer accepts no liability for any damage.
  • For safety reasons, modifications or alterations to the appliance are not permitted.
  • The appliance is not intended for outdoor use.
  • Appliances with a mechanical temperature regulator are intended for use up to a maximum altitude of 2000 metres above sea level.
• Any use outside these areas of application is not in accordance with the intended use and is therefore considered improper use.

Improper use

The following activities are considered improper use and are therefore prohibited:

• Do not store or refrigerate medicines, blood plasma, laboratory preparations or similar substances and products based on the Medical Devices Directive 2007/47/EC in the refrigerator.
• Do not store explosive substances or spray cans with flammable propellants such as butane, propane, pentane etc. in the appliance.
• Do not store carbonated, sparkling drinks in the freezer compartment.
• Do not store bottles in the freezer unless approved by the manufacturer.
• Do not squeeze food into the freezer compartments.
• Do not operate electrical appliances in the food store room that have not been approved by the manufacturer.
• The appliance is not suitable for commercial use.
• Do not set up the appliance outdoors.
• Do not connect the appliance to the mains power supply using multiple socket strips.
• Do not route the mains power cable under voltage.
• Do not kink the mains power cable.
• Set up the appliance so that the mains plug is accessible at all times.
• Do not pull the mains plug out of the plug socket at the mains power cable.

Safety for Specific Groups of People

• The appliance may be operated by children over 8 years of age and persons whose physical, sensory or mental aptitude are impaired or who lack experience and/or knowledge. However, they must be supervised or instructed in the safe use of the appliance and understand the possible risks.
  Children may only clean and service the appliance under adult supervision. Supervise children to ensure that they do not play with the appliance.

• DANGER

• RISK OF STRANGULATION DUE TO MAINS POWER  CABLE!

• Keep children under 8 years of age away from the mains power cable of the appliance.

• DANGER

• DANGER OF SUFFOCATION DUE TO PACKAGING  MATERIALS!

• Keep children away from the packaging materials.

• DANGER

• RISK OF SUFFOCATION FROM OLD APPLIANCE!

• Children playing can get trapped inside the appliance or get into other life-threatening situations.

  • Remove or destroy existing locks and fasteners.
  • Do not let children play with the appliance.
  • Always supervise children near the old appliance.

Residual risks

• DANGER
• ELECTRIC SHOCK HAZARD!
• Never touch the mains plug on the mains power cable with wet or damp hands when plugging it in or unplugging it.
• Install and connect the appliance only in accordance with the description in the instruction manual.
• In an emergency, pull the mains plug out of the plug socket immediately.
• Remove the mains plug from the plug socket before starting cleaning or service work.
• A damaged mains power cable must be replaced by our After Sales Service without delay.
• If the mains power cable or mains plug is damaged, do not use the appliance any more.
•  Do not carry out any work on the appliance other than the cleaning and service work described in this instruction manual.

WARNING

• FIRE HAZARD!
• An inadequate circulation of air can cause a build-up of heat that can lead to a fire.
• It is essential to observe the prescribed clearances for the rear, side and top of the appliance (see chapter Minimum Clearances).
• Keep compressor and condenser (depending on model) free of dust and objects.

Hazards due to refrigerant

WARNING
HEALTH HAZARD!
If the refrigeration circuit is damaged, R600a isobutane refrigerant will escape. The refrigerant poses a health hazard on contact with the eyes and if inhaled.

WARNING

• FLAMMABLE GAS!
• EXPLOSION AND FIRE HAZARD!
• The refrigerant circuit of the appliance contains the refrigerant isobutane (R600a), a natural gas with high environmental compatibility; it is flammable.
  • Only authorised specialists are allowed to work on the refrigerant system.
  • Do not damage the refrigeration circuit, e.g. by puncturing the refrigerant channels with sharp objects, kinking the pipework, etc.
  • Do not damage any parts of the refrigeration circuit when transporting, setting up, servicing or disposing of the appliance.
• In order that an explosive gas/air mixture cannot form in the event of a leak in the refrigeration circuit, the room in which the appliance is installed must have a minimum size according to standard
• EN 378 of 1 m³ per 8 g of refrigerant. The quantity of refrigerant in the appliance can be found on the type plate.

Setting up and connecting

• What to do if the refrigeration circuit is damaged:
  • Avoid naked flames and ignition sources.
  • Ventilate the room in which the appliance is installed thoroughly.
  • Contact After Sales Service.

Setting up and connecting

• Before setting up and connecting the appliance, ensure that
  • the appliance is disconnected from the mains power supply (see safety chapter, Electric ” Shock)
  • the installation conditions are fulfilled (see chapter Minimum Clearances).
• Unpacking the appliance
  The packaging materials must be undamaged. Inspect the appliance for transport damage. On no account should a damaged appliance be connected to the mains power supply. In case of damage contact the supplier.

CAUTION
RISK OF INJURY AND APPLIANCE DAMAGE!

• Always carry out transport with a second person.
• Do not cut packaging material with a sharp object, e.g. carpet knife.

Removing transport protection
The appliance and some of the interior parts are secured for transport.

• Remove all adhesive tape on the right and left side of the appliance door.
• Remove all adhesive tapes and packaging parts from the interior of the appliance.
• Remove residues of adhesive with alkaline water.
• There may be stickers with warnings on the appliance. These must be observed and not removed from the appliance.

Changing the door hinge
The door hinge of the appliance can be shifted from left to right or vice versa.

ATTENTION
APPLIANCE DAMAGE!
Do not tilt the appliance more than 45° when mounting the door in order not to damage the refrigerating system.

Tools required for changing door hinges:

STEP-BY-STEP INSTRUCTIONS

1.    Remove the cover plate from the top hinge.

2.    Unscrew the upper hinge.

|
3.    Remove the left-hand cover cap.|
4.    Remove the screw hole cover cap at the top left and fit it on the right side.

5.    Open door and lever it out of the middle hinge.

6.    Carefully place the upper door aside.

|
7.    Unscrew the middle hinge.

8.    Pull out the door from the bottom hinge and put safety aside.

|
9.    Release the the screw hole cover at the top left and fit it on the right side.|
10. With the help of a second person, tilt the device slightly backwards.

11. Release the lower hinge and the two adjustable feet.

|
12. Release the pin from the upper hinge, turn the hinge 180° and reinsert the pin.|
13. Screw the lower hinge to the left with two screws.

14. Screw in both adjustable feet.

15. Place the appliance vertically.

16. Release the lower appliance door stopper from the right- hand side.

17. Attach the door stopper from the accessory bag to the left-hand side.

18. Carefully fit the appliance door onto the pin of the lower hinge and close the door.

19. The Align appliance door horizontally and vertically. Make sure that the seals close well.

20. Turn the middle hinge 180° and screw it on to the left.

21. Release the upper appliance door stopper from the right- hand side.

22. Attach the door stopper from the accessory bag to the left-hand side.

23. Carefully fit the appliance door onto the pin of the middle hinge and close the door.

24. plug the pin of the upper hinge in the fixture of the upper appliance door.

25. Tighten hinge.

26. Align appliance door horizontally and vertically. Make sure that the seals close well.

27. Readjust the hinges if necessary.

|

28. Install the hinge cover and cap.|

Setting up the appliance

Place the appliance

• in accordance with the prescribed minimum clearances.
• Set up the appliance in a dry, well-ventilated room whose ambient temperature corresponds to the climate class for which the appliance is designed.

ATTENTION

APPLIANCE DAMAGE!
Leave the appliance to stand for 12 hours after transport to allow the refrigerant to collect in the compressor. Failure to observe this may damage the compressor and cause the appliance to fail. This would void all warranty claims.

Minimum clearances for ventilation
Air circulation at the rear, side and top of the appliance influences energy consumption and refrigerating/freezing performance (depending on model). It is essential that the minimum clearances for ventilation of the appliance are observed as shown in the following drawing. If the minimum clearances are not observed, the accumulated air cannot escape and the compressor is in continuous operation, which shortens the life of the appliance.
Unit dimensions in mm and degrees

Putting into operation

• Failure to observe the minimum distances increases the power consumption.
• If the accumulated heat cannot dissipate around the appliance, the function of the appliance is impaired.
• To achieve the specified energy class, comply with the above mentioned clearances.
• Do not install refrigerator/freezer combinations with one temperature regulator in refrigerated rooms below 16 °C.

Levelling
If the surface is slightly uneven, level the unit with the front feet.

 Putting into operation

Clean the appliance and the interior parts thoroughly before putting into operation (see chapter SERVICE AND MAINTENANCE).

• Set the temperature according to the ambient temperature at the installation location if the equipment is changed or if the appliance door is opened and closed frequently.
• With very high summer temperatures, set the temperature regulator to a higher level to maintain the desired cooling temperature.
• For optimum energy consumption, leave the glass shelves/drawers in the appliance as shown (see section STORAGE OF FOOD).
• The freezer compartment is ready for use after about 3 hours.

Switch appliance ON/OFF

1. Connect the appliance to the mains power supply.
   When the appliance door is opened, the interior light comes on.

2. To switch on the appliance, turn the temperature regulator from 0 to the right to the desired cooling temperature.

3. To switch off the appliance, turn the temperature regulator to position 0.

ATTENTION

APPLIANCE DAMAGE!
Do not switch on the appliance immediately after a power interruption. Possible overload of the compressor or fuse blows.
Setting the temperature
The temperature depends on certain factors, such as the place of installation, how often the appliance door is opened and closed or how the appliance is loaded.

1. Adjust the internal temperature of the appliance with the regulator setting.

2. When switching on for the first time, turn the temperature regulator to the highest setting.
   The appliance reaches its normal working temperature after approx. 2 hours and is then ready for operation.

3. Turn the temperature regulator back to a medium setting.

Locating the coldest position in the refrigerator compartment

The adjacent symbol indicates a temperature of at least +4 °C and colder in the refrigerator (above the glass shelf over the vegetable drawer) approx. 8 cm from the rear wall.
If the symbol OK is not visible is the temperature not optimal:

1. only change the temperature regulator gradually and wait for approximately 12 hours before checking again.
2. Repeat this step until the OK symbol is visible.

To check if it is too cold (below +4°C) in the area where the OK symbol is visible:

1. Turn the temperature control knob one / half step warmer. (wait approx. 12 hours before checking again).
2. If the OK symbol is still visible, set the temperature one or half step warmer (wait approx. 12 hours before checking again).
3. As long as OK is visible, repeat step 1 until the midpoint for the target temperature of +.4 °C is reached.
   • The OK sticker is intended for use in this appliance only.
   • If the appliance door remains open longer, the temperature in the appliance rises. The display may fade or no longer be visible.

Door Open Alarm
If the appliance door is open for more than 60 seconds, the interior light flashes 3x and then the lights up continuously for 5 seconds. This message repeats until the appliance door is closed.

Proper Storage of Food
Proper storage can help maintain food quality.

WARNING

HEALTH HAZARD!
If the appliance is switched off or the power has failed, the food is not sufficiently refrigerated. Stored food can thaw or defrost and spoil. There is a risk of food poisoning if the thawed food is consumed.

• After a power failure, check whether the stored food is still fit for consumption.
• Dispose of frozen food that has visibly thawed after a power failure.
• Do not freeze food that has already been thawed or defrosted.

The refrigerating compartment is suitable for the storage of fresh food and beverages.
Observe the following when storing in a refrigerating compartment:

• Use only food that is fit for consumption.
• Keep the period between the purchase of the food and its storage in the appliance as short as possible.
• Only store fresh meat and fresh fish well packed in protective film or airtight containers in the coolest place in the appliance for a maximum of 1 to 2 days. Avoid contact with cooked food.
• Avoid contamination of food with raw meat and raw fish. Meat juice must not come into contact with other foodstuffs.
• Do not store potatoes, onions, garlic, tomatoes, bananas and avocados in the refrigerator. If this is necessary, then only for a short time and well packed.
• Cover food before placing into the appliance, particularly cold meals, cooked foods and spiced foods.
• Allow warm meals to cool down before placing into the refrigerator.
• Increased temperature in the appliance makes food spoil faster. The medium temperature setting is best suited for optimum food preservation.
• Place food in the refrigerator in such a way that the air can circulate freely in the compartment.
• When storing bottles in the bottle compartment of the inner door, make sure that they are not too heavy; the compartment could come away from the door.
• Children aged 3 to 8 years may load and unload the appliance.

The following are suitable for packing:

• For food: suitable plastic bags and films
• Special plastic hoods with rubber draw tape
• Aluminium foil

To store larger quantities in the refrigerating refrigerator/freezer, the glass shelves are removable.
The storage rack is removable / height-adjustable.
The glass shelves are / height adjustable.

1. Pull the glass shelf forward.
2.  Pivot the glass shelves up or down and remove.

The glass shelf above the vegetable drawer always remains in the same position to ensure correct air circulation.
Observe the following information when refrigerating fresh food :
If the appliance doors are open for a long period of time, this leads to a considerable increase in temperature in the compartments of the appliance. Stored food can therefore spoil faster.

The freezer compartment is suitable for the longer-term storage of frozen goods and for freezing fresh food.

CAUTION
RISK OF INJURY!
Touching frozen goods, ice and metallic parts inside the freezer compartment of the appliance can cause burn-like symptoms on very sensitive skin.
Do not touch frozen goods with damp or wet hands; your hands could freeze to the goods.
Observe the following when storing in a freezer compartment:

• Keep the appliance doors closed in the event of a power failure. The food remains frozen for several hours (see STORAGE TIME IN THE EVENT OF FAULTS product fiche).
• Use only food that is fit for consumption.
• Do not interrupt the refrigerating chain of frozen products.
• Keep the period between the purchase of the frozen food and its storage in the appliance as short as possible.
• Do not freeze large quantities at once. The quality of the food is best retained if it is quickly frozen through to the core. The maximum amount of food you can freeze within 24 hours is stated on the type plate and in the product fiche.
• The temperature during the freezing phase can be influenced via the temperature regulator in the refrigerating compartment.
• Store high-proof alcoholic beverages only tightly closed and upright. Observe the beverage manufacturer’s instructions.
• For safety reasons, freezer drawers are fitted with a stop device. However, you can remove them completely by pulling them up and then removing them. They are inserted in the reverse order.

*Description of freezer compartment according to number of stars ()**

Overview of storage recommendations for refrigerator/freezer compartment

freezing capacity maximum amount of 24 hour of class is indicated on the type plate (inside the refrigerator or on the rear of the appliance) and in the product data sheet.

Making ice cubes
Fill an ice cube tray three-quarters full with water and place horizontally on the bottom of the freezer compartment. Loosen a frozen ice cube tray only with a blunt object (e.g. the handle of a spoon). Hold frozen ice cubes under running water for a short time to make them easier to remove.

Saving energy

• Do not install the appliance near stoves, radiators or other heat sources. At higher ambient temperatures, the compressor runs longer and more frequently and results in a higher energy consumption.
• Ensure adequate ventilation space at the base, on the sides and back of the appliance. Never cover ventilation openings. Observe the clearances (see chapter SETTING UP AND CONNECTING).
• The arrangement of the drawers, shelves and compartments as shown in the figure GETTING TO KNOW YOUR APPLIANCE offers the most efficient use of energy and should therefore be maintained where possible.
• For more storage space (e.g., for large refrigerated/frozen goods) remove the middle shelves/drawers. Remove the top and bottom shelves/drawers last if necessary.
• A uniformly filled refrigerator/freezer compartment contributes to an optimum use of energy. Avoid empty or half-empty compartments.
• Do not place hot food in Install the appliance. Let food cool down first.
• Allow frozen food to thaw in the refrigerator. The cold from the frozen food lowers the energy consumption of the refrigerating compartment and thus increases the energy efficiency.
• Do not set the temperature lower than necessary. This also contributes to an optimum energy utilisation.
• The door seals must be absolutely intact so that the doors close correctly and the energy consumption is not unnecessarily increased.
• Open the appliance only when necessary, and then for as short a time as possible. Energy consumption and the temperature inside the appliance can increase if the appliance door is opened frequently or for a long time, or if it is not closed properly.

Service and maintenance

• For hygiene reasons, regularly clean the appliance inside and out, including the door seal and interior fittings.
• Before carrying out any maintenance and servicing work, ensure that the appliance is disconnected from the mains power supply (see safety chapter Electric Shock).
• CAUTION
• RISK OF INJURY!
• Do not use electric heaters, naked flames, knives, etc. for defrosting.
• Never clean the appliance with a steam cleaner. Moisture could get into electrical components.
•  When the temperature regulator is set to 0, refrigeration is switched off, but the power supply remains switched on.
• ATTENTION
• APPLIANCE DAMAGE!
• Do not use abrasive or aggressive cleaning agents.
• Do not use abrasive sponges.
• Essential oils and organic solvents, e.g., the juice of lemon or orange peel, butyric acid or cleaning agents containing acetic acid can attack plastic parts. Do not allow such substances to meet parts of the appliance.

Cleaning the appliance

1. Remove the goods. Store everything covered and in a cool place.
2. To clean the glass shelves, lift them slightly upwards and pull them out until they can be pivoted up or down and removed.
3. Push up and remove the door compartments.
4. Clean the appliance, including the door seal and interior parts, using a cloth and lukewarm water with a little household detergent.
5. Rinse with clear water and wipe dry.
6. Check the condensation drain hole. Clean regularly using cotton swabs.
7. Install the cleaned glass shelves, door compartments, drawers, etc. again.
8. Make sure that the interior of the appliance is completely dry.
9. Connect the appliance to the mains power supply and switch it on.

Cleaning/replacing the Appliance Doorseal

Checking the airtightness of the door seals or cover seals Checking the appliance door seal.

1. Clamp a sufficiently long strip of paper 50 mm wide and 0.08 mm thick at various points on the appliance.
   If the paper can be pulled through with a slight resistance, the appliance door seal is tight. (The thickness test of the paper used is carried out according to ISO 534)

or

1.  Place a torch on a glass shelf in the appliance, direct the light towards the appliance door seal and close the door. If no direct light shines through, the appliance door seal is tight.
   If direct light shines through the closed door, the appliance door seal is not tight.

Replacing the appliance door seal

1. Remove food from the appliance.
2. Pull the appliance door seals out of the appliance.
3. Clean the appliance door as usual.
4. Insert the new appliance door seal in the gaps.
5. Insert the appliance door seal in the corners first and press, /stroke it with your thumb.
6. If the appliance door seal is not evenly applied everywhere: carefully heat the relevant areas with a hairdryer and pull out a little with your fingers.
   • Inspect the appliance door seals regularly for soiling and damage.
   • Grease and oil make the appliance door seals porous and brittle. If grease or oil has got on the door seals: Clean the seals immediately, using a cloth and luke-warm water with a little household detergent.

Clean Water Dispenser
If the water tank has not been in use for 48 hours, clean the tank and the collection container for hygienic reasons.

Defrosting

Automatic defrosting in the refrigerating compartment
The refrigerated area is equipped with an automatic defrosting system. Frost and ice defrosts automatically. The condensation flows through the channel into the defrosting hole and out into a condensation bowl on the rear of the appliance. The heat from the motor evaporates the condensation.
Set the temperature so that the appliance does not constantly cool down – without a defrost phase. The temperature in the refrigerator drops (to below 0°C) and drinks and fresh food freeze. The icing of the rear wall causes the energy consumption to rise very sharply and the appliance efficiency drops.

• If the condensation does not run properly through the drain line into the drip tray, check whether the drain line is clogged (see chapter TROUBLESHOOTING).
• There must be no water on the floor or in contact with electrical components.

Manual Defrosting in the Freezer Compartment
After prolonged operation, a frost and ice layer may form in the freezer compartment. If this ice layer reaches a thickness of 6 – 8 mm, defrost and clean the freezer compartment. An excessive frost and ice layer increases the energy consumption. Before defrosting, set the temperature regulator to the highest settings; the frozen goods store the cold for a certain length of time.

1. Pull out the mains plug.
2. Empty the appliance and store the goods in a cool room.
3. For faster defrosting, place a vessel with warm water into the freezer compartment.
4.  Do not use mechanical objects to remove the ice layer.
5. First remove the large pieces of ice, then the small pieces from the appliance.
6. Clean the freezer compartment, including the interior parts, using a cloth and luke-warm water with a little household detergent.
7. Rinse with clear water and wipe dry.
8. After cleaning, connect the appliance to the mains power supply again and switch on.

Lamp (LED)
The appliance is equipped with maintenance-free LED lighting.
Repairs to this LED lighting should only be carried out by After Sales Service.

Decommissioning the appliance
To switch off the appliance, remove the mains plug and switch off or unscrew the fuse.

• Remove the food.
• Remove the mains plug or switch off and unscrew the fuse.
• Defrost the appliance and clean thoroughly (see chapter SERVICE AND MAINTENANCE).
• Leave the appliance door open to avoid the formation of odours.

Operating Noises / Troubleshooting

Repairs to electrical appliances may only be carried out by After Sales Service (see chapter SPARE PARTS/AFTER SALES SERVICE SALES SERVICE). An incorrectly performed repair can pose dangers for the user.
If the repair is not carried out professionally, the warranty claim is voided.
Operating noises

and other vessels.
Vibration of the condenser (only where the condenser is visible on the rear of the appliance)| Check whether the condenser is loose on the rear of the appliance. Secure condenser.

Troubleshooting

door is opened too

often.

| Do not open the appliance

door unnecessarily.

The air circulation around the appliance is obstructed.| Keep the area around the appliance free.

• The appliance does not refrigerate.
• **** Side wall is very warm (models with foamed-in condenser only).

| The appliance is switched off or is not connected to the mains power supply.| Check the power supply and fuses. Check whether the mains plug is correctly plugged in to the plug

socket. Check that there is voltage at the plug socket.

The temperature regulator is in position 0.| Check the temperature regulator settings.
Ambient temperature is too low.| (see chapter Setting up the unit)

• The condenser gives off warm air to the environment. If the ambient temperature is too high, heat accumulation can occur.
• Once the ambient temperature has dropped, the appliance will refrigerate again normally. Be sure to maintain the prescribed clearances (see chapter Setting up the appliance).

| No actions necessary.
OK sticker does not appear.| Average temperature in this area is set too high.| Set the temperature regulator to a colder setting. Only change the temperature regulator gradually and wait for approximately 12 hours before checking again.
---|---|---
A layer of frost or ice forms on the rear inner wall.| High room temperatures (such as on hot summer days) and a high temperature regulator setting can lead to continuous refrigerating operation. The compressor must run continuously to maintain the set temperature in the appliance. The appliance is not able to defrost automatically as this is only possible when the compressor is not running (see chapter DEFROSTING ).| Set the temperature regulator to a lower setting. The compressor will start and stop as usual and automatic defrosting will continue.

Spare parts/After Sales Service

The following spare parts are available from After Sales Service (depending on the appliance):

1. Thermostats, temperature sensors, circuit boards and light sources
2.  Door handles, door hinges, shelves and drawers

Spare parts are available 7 years after the last appliance of a model has been placed on the market.
Door seals are available 10 years after the last appliance of a model has been placed on the market.
To access the product database, for:

• Repair orders
• Product data-sheet
• User Manual

an the service QR code from the enclosed service card or from the type plate on the appliance.

Service card

For more information on the service, see the enclosed service card. Customer service address:
EGS GmbH
Dieselstraße 1
33397 Rietberg / GERMANY

A visit by an After Sales Service technician is not free of charge even during the warranty period in the event of incorrect operation or one of the faults described above.

Warranty Terms

• As the buyer of an Exquisit appliance, you are entitled to the statutory warranty under the purchase contract with your dealer. The use of statutory warranty rights is free of charge. The warranty rights are not limited by this warranty. This warranty is granted to you under the following conditions:

Warranty period

• The warranty period is 24 months from the date of purchase (proof of purchase must be presented). During the first 12 months, After Sales Service will fix defects in the appliance free of charge, on condition that the appliance is accessible for repairs without any great effort. During the following 18 months, the buyer is obliged to prove that the defect already existed at the time of delivery.
• In the case of commercial use (e.g. in hotels, canteens) or joint use by several households, the warranty period is 12 months from the date of purchase (proof of purchase must be presented). During the first 6 months, After Sales Service will fix defects in the appliance free of charge, on condition that the appliance is accessible for repairs without any great effort. During the following 6 months, the buyer is obliged to prove that the defect already existed at the time of delivery.
• The claim under warranty does not prolong the warranty period for either the appliance or for newly installed parts.
• Scope of the defect remedy
  Within the periods indicated, we will remedy all defects in the appliance that are demonstrably attributable to poor workmanship or material flaws. Replaced parts become our property.

The warranty does not cover:

• Normal wear and tear, intentional or negligent damage, damage caused by non-compliance with the operating instructions, improper set-up or installation or by connection to incorrect mains voltage, damage due to chemical or electrothermal effects or due to other abnormal environmental conditions, glass, paint or enamel damage and possible colour differences as well as defective bulbs.
• Defects in the appliance resulting from transport damage are also not covered. We are also not obliged to perform defect remedies, if – without our express written authorisation – work is carried out on the Exquisit appliance by unauthorised persons or third-party parts have been used. This limitation shall not apply to faultless work carried out by a qualified person using our original parts to adapt the appliance to the technical safety regulations of another EU member state.

Scope

• Our warranty applies to appliances purchased and in operation in the Federal Republic of Germany or Austria.
• In the case of complaints about defective appliances, the sender’s and recipient’s addresses must be in the Federal Republic of Germany or Austria.
• For appliances purchased and operated in other European countries, the warranty conditions of the seller apply.
• For repairs outside the warranty period:
  • If an appliance is repaired, the repair invoices are payable immediately without deduction.
  • If an appliance is inspected or a started repair is not completed, flat-rate travelling expenses and labour costs will be invoiced.
  • Advice from our After Sales Service centre is free of charge (see chapter 14).

GGV Handelsgesellschaft mbH & Co. KG, August-Thyssen-Str. 8, D-41564 Kaarst- Holzbüttgen

Disposal

Dispose of packaging
Dispose of the packaging according to type. Put cardboard and carton in the waste paper collection and foil in the recyclables collection.

Dispose of old appliance (EN)
Old appliances must not be disposed of with household waste.

• The symbol of the crossed-out wheeled bin on the product or its packaging means that the appliance must not be disposed of with household waste but requires separate disposal. You can take the old appliance free of charge to a suitable municipal collection point for waste electrical and electronic equipment, e.g. a recycling centre. You can obtain the addresses from your city or local government.
• Alternatively, you can return small WEEE with an edge length of up to 25 cm free of charge to retailers with a sales area for electrical and electronic equipment of at least 400 m2 or food retailers with a total sales area of at least 800 m2 , who offer electrical and electronic equipment at least several times a year.
• Larger old appliances can be returned free of charge to an appropriate retailer when purchasing a new appliance of the same type that performs substantially the same functions as the new appliance.
• For the modalities of returning an old appliance in case of delivery of the new appliance, please contact your dealer.
• Please remove – if possible – all batteries and accumulators as well as all lamps that can be removed without destroying them before disposing of the product.
• We would like to point out that you are responsible for deleting personal data on the device to be disposed of.
• Children are often unable to recognise the dangers inherent in handling household appliances. Provide the necessary supervision and do not let children play with the appliance.

Dispose of old appliances (AT)

• The symbol of the crossed-out wheeled bin on the product or its packaging means that the appliance must not be disposed of with household waste but requires separate disposal. You can take the old appliance free of charge to a suitable municipal collection point for waste electrical and electronic equipment, e.g. a recycling centre. You can obtain the addresses from your city or municipal administration. Alternatively, you can return WEEE free of charge when buying a new appliance of the same type and with the same function from a stationary retailer. Please contact your dealer regarding the modalities of returning an old appliance in case of delivery of the new appliance.
• Please remove – if possible – all batteries and accumulators as well as all lamps that can be removed without destroying them before disposing of the product.
• We would like to point out that you are responsible for deleting personal data on the device to be disposed of.
• The appliance may contain substances that can endanger the environment and human health if disposed of incorrectly. Material recycling helps to reduce waste and conserve resources. By collecting old appliances separately and recycling them, you help prevent negative impacts on the environment and human health.

GGV HANDELSGES. MBH & CO. KG AUGUST-THYSSEN-STR. 8
D-41564 KAARST
GERMANY
www.exquisit.de

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>