Milesight VE1604-A 64 Channel Professional NVR User Guide
- August 18, 2024
- Milesight
Table of Contents
- Milesight VE1604-A 64 Channel Professional NVR
- 1. Packing List
- 2. Hardware Introduction
- 3.Interfaces
- 4.Rail Installation
- 5. HDD Installation
- 6. Disk Array Wizard
- 7. Device Connection Topology
- 8. Ready to Start
- Specifications:
- FAQ:
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Milesight VE1604-A 64 Channel Professional NVR
USER GUIDE
MODEL: VE1604-A/VE1608-A
1. Packing List
2. Hardware Introduction
3.Interfaces
4.Rail Installation
Step1: First, insert the rear part of the left rail into the slot, then adjust the length of the rail and align the front screw with the slot.
Step2: Install the right side rail same as the left side.
Step3: Tighten the screw to fix the rail.
Step4: Place the Enterprise NVR into the rail and push it to the bottom.
Step5: Finish the rail installation.
5. HDD Installation
Step1: Press the release button to open the hard-drive carrier release handle.
Step2: Slide the hard-drive carrier out until it is free of the hard- drive slot.
Step3: nsert the hard drive into the carrier with the connector end of the hard drive toward the back. And align the screw holes on the hard drive with the set of screw holes on the hard drive carrier.When aligned correctly, the back of the hard drive is flush with the back of the hard drive carrier.
Step4: Attach the screws to secure the hard drive to the carrier.
Step5: Insert the hard drive carrier into the hard drive slot until the carrier connects with the backplane. Close the hard drive carrier handle to lock the hard drive in place.
Step6: Finish the HDD installation
6. Disk Array Wizard
If you wish to configure RAID to ensure data security and redundancy, please scan the QR code below to access the tutorial on setting up RAID on an Enterprise NVR.
7. Device Connection Topology
8. Ready to Start
1. After connecting the power cord, you can press the power button to turn on
the device.
2. For normal device operation and data security, please use two power cords
at the same time to prevent potential data loss caused by unexpected power
outages or other issues.
3. The automatic power-on function is disabled by default. If you want to
enable it, please do so in the BIOS.
All software & files can be downloaded from
https://www.milesight.com/support/download/
Specifications:
-
Model: VE1604-A/VE1608-A
-
Interfaces:
- 2*Power Port
- Display Port
- 2*HDMI Port
- PS/2 Port
- 2*USB 2.0
- 2*USB 3.2 Gen2
- 2*USB 2.0
- LAN Port 2.5G
- Audio
- 2*LAN Port 1000M
-
HDD Slots: 16
-
-
FAQ:
Q: Where can I download software and files for the Enterprise NVR?
A: All software & files can be downloaded from
https://www.milesight.com/support/download/