iPettie 670A Cat Water Fountain User Manual

August 17, 2024
iPettie

iPettie 670A Cat Water Fountain

Caution

  1. Soak the new filter for 15 minutes in water and then install it into the filter tray.
  2. For indoor usage only.
  3. Please prevent the plug or power adapter from becoming wet.
  4. When plugging in the water fountain, please make sure the power adapter stays elevated above the device at all times. (Do not use an electrical outlet that is at floor level to insure the power adapter stays above the water line at all times, to prevent electrical shock).
  5. Do not allow pets to chew on or swallow components of the water fountain.

Product Specification

  • Product Name: Stainless Steel Pet Water Fountain
  • Input Voltage: AC 100-240V 50/60hz
  • Output Voltage: DC 5V 1A
  • Pump Specification: DC Water Pump
  • Power Consumption: 1.5 W
  • Water Capacity: 2.5 L (84 oz)
  • Housing Material: Stainless Steel 304
  • Filter System:
    • PP Cotton
    • Activated carbon
    • lon exchange resin
  • Product Dimensions: 7.87″x7.28″x4.72″ / 20X18.5X12cm
  • Product Weight: 1.59lb / 0.72kg

What’s in The Box

  • 1 x Pet Water Fountain
  • 1 x Filter
  • 1 x Foam Filter
  • 1 x Cleaning brush
  • 1 x Water pump
  • 1 x Adapter
  • 1 x User manual

Getting to Know Your Water Fountain

  • Flower
  • Water Tray
  • Filter
  • Lid
  • Outlet Pipe
  • DC Pump
  • Foam Filter
  • Cord Cap
  • Water Tan

User Instruction

Install the foam filter and the pump

  • A Insert the pump into the foam filter and set both down into the base of the water tank. Press down so the suction cups attach.
  • B Feed the USB cord down into the bracket hole and out through the notches on the bracket’s bottom.
  • C Insert the cord cap. This holds the cord in place.

Install outlet pipe and filter tray

  • A Align the outlet pipe with the water pump outlet, and press them tightly.
  • B Align the notch and install the filter tray.

Install the filter, lid and flower accessory.

  • A Take out the filter unit, and soak it in clean water. Rinse it slightly with water.
  • B Install the filter in the filter tray. Install the lid, and flower in sequence, and connect the power adapter.

Filter Replacement & Foam filter replacement

It’s recommended to replace the filter once every month and replace the foam filter every two months.

Cleaning and Maintenance

  • Replace the drinking water once a week.
  • Do not use strong alkaline or bleach-based products to clean the fountain.
  • Keep the fountain away from the direct sunlight.
  • Clean the water pump once a month to prevent it from becoming clogged with dust. Failure to do so can result in poor water flow and other issues.
    • Remove the pump Cover.
    • Clean the pre-filter grate with soap and warm water.
    • Remove the impeller and clean the parts with soap and warm water.

FEATURES

  • Superior Materials: Constructed from food-grade, BPA-free materials that guarantee pet safety.
  • Quiet Operation: This unit has an ultra-quiet pump that runs at a decibel level below thirty, creating a calm atmosphere.
  • 3-Layer Filtration System: To guarantee pure and purified water, this system uses three filters: activated carbon, ion exchange resin, and non-woven fabric.
  • Large Water Capacity: Suitable for households with multiple pets, it can carry up to 2.5 liters (84 oz) of water.
  • Simple Maintenance and Cleaning: The design has easily removable pieces for effortless cleaning.
  • Energy-Efficient Pump: Because the low-power pump uses less energy, it is more affordable to operate constantly.
  • Adjustable Water Flow: This feature lets you customize the water flow to your pet’s preferred level.
  • Promotes Better Hydration: Cats are encouraged to consume more water due to the revolving flow of water.
  • Compact Design: It’s perfect for apartments and smaller homes because it fits neatly in small places.
  • Anti-Slip foundation: By keeping the fountain steady, the non-slip foundation avoids spills and messy situations.
  • LED Indicator Light: This device has a dim LED light that shows the water level and alerts users when a refill is necessary.
  • Detachable Power Cord: This item has a detachable power cord for effortless cleaning and storing.
  • Automatic Shut-Off: To prevent damage to the pump, the pump will automatically cut off when the water level drops too low.
  • Dishwasher Safe: Cleaning is made simple because the fountain’s top-shelf components are dishwasher safe.
  • Fresh Water Circulation: Regular circulation aids in preventing the growth of potentially dangerous microorganisms.
  • Compact & Lightweight: Its lightweight, portable design makes it simple to transport on excursions or move about the house.
  • Many Flow Modes: Provides a variety of water flow options, such as a waterfall, bubbling, and soft flow.
  • With smart sensor technology, water flow is automatically turned on when motion is detected, saving electricity.
  • Eco-Friendly Design: Encourages sustainable living by using eco-friendly materials.
  • Cost-effective Replacement Filters: The fountain employs easily accessible and reasonably priced replacement filters, guaranteeing long-term operation without exorbitant expenses.

FREQUENTLY ASKED QUESTIONS

What are the dimensions of the iPettie 670A Cat Water Fountain?

The iPettie 670A Cat Water Fountain measures 7.87 inches in length, 7.28 inches in width, and 4.72 inches in height.

How much does the iPettie 670A Cat Water Fountain weigh?

The iPettie 670A Cat Water Fountain weighs 1.81 pounds, making it lightweight and easy to place in various locations within your home.

What is the capacity of the iPettie 670A Cat Water Fountain?

The iPettie 670A Cat Water Fountain has a capacity of 2.5 liters, ensuring that your pets have ample access to fresh water throughout the day.

What is the power source for the iPettie 670A Cat Water Fountain?

The iPettie 670A Cat Water Fountain is powered by a corded electric source, providing continuous operation and a reliable water flow.

What is the price of the iPettie 670A Cat Water Fountain?

The iPettie 670A Cat Water Fountain is priced at $39.99, offering a cost- effective solution for keeping your pets hydrated.

Does the iPettie 670A Cat Water Fountain come with a warranty?

iPettie 670A Cat Water Fountain comes with a 1-year warranty, providing peace of mind against manufacturer defects.

Who manufactures the iPettie 670A Cat Water Fountain?

The iPettie 670A Cat Water Fountain is manufactured by iPettie, a brand known for producing quality pet care products.

How does the iPettie 670A Cat Water Fountain help in keeping pets hydrated?

The iPettie 670A Cat Water Fountain encourages pets to drink more water by providing a continuous flow of fresh water, which is appealing to both cats and dogs.

How easy is it to set up the iPettie 670A Cat Water Fountain?

The iPettie 670A Cat Water Fountain is easy to set up, with clear instructions provided by the manufacturer. Simply plug it in, fill with water, and it’s ready to use.

What are the benefits of the 2.5-liter capacity in the iPettie 670A Cat Water Fountain?

The 2.5-liter capacity ensures that there is plenty of water available for your pets, reducing the need for frequent refills and ensuring they stay hydrated even if you are away.

What makes the iPettie 670A Cat Water Fountain a good choice for pet owners?

The iPettie 670A Cat Water Fountain is a good choice for pet owners due to its affordable price, large capacity, easy setup, and the 1-year warranty provided, ensuring a reliable hydration solution for their pets.

Why is my iPettie 670A Cat Water Fountain not turning on?

If your iPettie 670A Cat Water Fountain is not turning on, make sure it is properly plugged into a working power outlet. Check the power adapter connection and confirm that the power switch is in the on position.

Why is the water flow in my iPettie 670A Cat Water Fountain weak or inconsistent?

Weak or inconsistent water flow in the iPettie 670A Cat Water Fountain could be due to a clogged pump or a dirty filter. Clean the pump and replace the filter if necessary to restore proper water flow.

What should I do if my iPettie 670A Cat Water Fountain is making a loud noise?

A loud noise from the iPettie 670A Cat Water Fountain typically indicates that the water level is too low, causing the pump to run dry. Refill the fountain with water until the noise subsides.

Why is my iPettie 670A Cat Water Fountain leaking water?

If your iPettie 670A Cat Water Fountain is leaking, check for any cracks in the water reservoir or improper assembly of the parts. Ensure that all components are securely connected and that the fountain is placed on a flat, stable surface to prevent leaks.

VIDEO – PRODUCT OVERVIEW

DOWNLOAD THE PDF LINK:iPettie 670A Cat Water Fountain User Manual

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals