iPettie F9-L Wireless Cat Food Dispenser User Manual

User Manual
Smart Pet Feeder

THANKS FOR CHOOSING OUR AUTOMATIC PET FEEDER

Components

Features

Parameters

( With Food Tray)
Color Box Size| L191.5mmW177mmH360mm
Material| ABS
N.W| Around 2.2KG
Food Appliance| 515mm Dry Food
, Freeze Dried Food
Pets Appliance| Cats & Small Size Dogs
Capacity| 3.SL
Power| DC SVl A Adapter/ 4 * D Size Batteries
Rated Voltage| DCSV
Rated Power| 0.5W
Working Temperature| 5°C-50C

Product Instructions

Panel Unclocking/Locking

| Press“○”3s unclock panel, screen will light up
Finished setting, press“○”3s to save and return to main page
Then press“○”3s lock panel, screen turns dark
---|---

Current Time Setting

Feeding Schedule Setting

Notice: When setting “00:00” feeding time or “P-00”feeding, this feeding plan win not work.

Low Power Mode (Batteries powed only)

Screen Status Icons

| ON| Panel Locked
---|---|---
OFF| Panel Unclock
| ON| Low Power
FLASH
| ON| Voice Recorded
OFF|  No Voice Record
FLASH| Voice Recording
| ON| Meal ON
OFF| Meal OFF
FLASH| Next Meal

Manual Feeding

| Unclock panel，
press“+”1s to manual feeding one portion
---|---

Recording

| Unlock panel，press“    ”and hold on，screen“    ” lights up then start recording. Screen will start  counting down from“V-10”to“V-00”,Speaking to the button “    ”, finish the recording then release the  button
New recording need to repeat the above process
---|---

Recording Playback

| Unclock panel，press“    ”to play the recording
If no recording then no voice comes out
---|---

Factory Setting

| Unclock panel，press“○”and“-”the at same time for
3s，pet feeder will clean up all settings
Including the feeding plan and voice recording.
---|---

Setup and Assemble Feeder

| Lift The Latch
Snap your fingers on the food bucket in the recessed position on the back.
Lift upward to open the lid
---|---
| Place Desiccant
Rotate the desiccant box counterclockwise to tear off the outer package of desiccant
Put the desiccant into the box and rotate it clockwise to close it.
Desiccant is not edible,
Please keep it away from children, the elderly and pets.

Plug in Power Adapter

1. Battery power supply: remove the battery cover by releasing the retaining clip, insert 4 good quality alkaline “D” batteries and reinstall the battery cover.
   Note: Please use safe and standard alkaline batteries. Do not mix batteries of different specifications and models.

2. Power adapter supply: plug in the power adapter and connect the power cable into the card slot.

Install Food Bowl
Tilt the base unit back slightly, align the buckle of the food bowl with the base unit to install; the same steps to disassemble.

Fill Pet Food
Open the lid, fill the hopper with a suitable quantity of dry food well in excess of a daily amount. To maintain maximum food freshness, we recommend that a maximum of 1 O days food is loaded.
Note: The device only support 5-15mm dry pet food or freeze dired food.

Disassemble & Clean

Clean the Food Hopper

1. Turn both knob locks to the unlocked position, unlock the food bucket.

2. To disassemble, hold both sides of the food bucket and lift upwards.

3. Disassemble the impeller/ feeding slice and feeding mechanism.

4. The main body of the feeder is not dish washer-safe. Do not immerse the main body in water, this could damage the internal electronics and cause the batteries to short out, create an electrical shock, or catch fire.

5. Make sure all parts of the feeder are completely clean and dry before filling with food.

Assemble the Food Hopper

1. Align food hopper with slots in the main body and press down.

2. Fix the feeding slice and impellers as the above picture shows. (Please pay attention to “+”shape directions.)

3. Align the impeller bottom cover with slots and rotate in anticlockwise direction until you hear the crack sound.

4. Adjust the impeller and make the rubber parts cover the food outlet shows in the picture.

If the impeller is not well fixed ,it may cause the device not able to dispense the food.

Clean the Food Bowl
The food bowl is dishwasher-safe once removed from the main body.

Clean the Body
Use the dry soft cloth to wipe it, the body is not waterproof, please do not use wet cloth.

Replace the desiccant pack
Open the desiccant box cover and replace the desiccant pack. It is suggested to replace it every one or two months.

Replace Alkaline Batteries
Unplug and open battery lid atthe bottom, then you can replace the batteries

Replace Alkaline Batteries
Take out the food hopper and empty the food hopper then fill the fresh food and proceed instant feeding once.

Warnings

1. Please keep the food hopper dry after cleaning it.
2. Please replace the food on a regular basis if your pets did not eat up.(For time period, please refer to the food packing instruction)
3. Please clean and maintenance your device on a regular basis to prolong the using period of your pet feeder.

FAQ

batteries
Low power mode| Single press button light up screen
Unable to fix the food hopper| Impellers are not well fixed| Check and rotate the impeller
Unlock Knob Lock| Make sure Knob Lock  is unclocking
E1–­
Display| Impurities inside food hopper| Clean the impurities inside of food hopper
Food size inapplicable| Ensure to use 5-15mm dry food
E4­–
Display| Photoelectric sensor faulty| Contact After-sale service
Motor faulty| Contact After-sale service
ES LP
Display| Dry batteries low power| Replace the new dry batteries.

Safety Precautions

Read all instructions carefully before attempting to operate this device.

Ensure power supply

1. Please check the power supply before going out.
2. Device has RTC ti me saving function, ti mer will not stop working when switch off.
3. Please pay attention to the battery display when powered by batteries, users need to replace the batteries when ” ES: LP” shows on device screen;
4. lt’s suggested to replace the batteries once a year if you do not get the device work by batteries, for the power will be running off with time goes by
5. When powered by batteries, it is normal for the electric quantity icon to fluctuate occasionally because of the large transient current.

• Before leaving for extended time, always replace Battery Backup with 4 new “D” size batteries.
• DO NOT place any foreign objects in the feeder.
• DO NOT operate feeder without Bowl, Food Hopper and Lid securely in place.
• To avoid tripped,always keep power cord out of the way of foot traffic.
• Feeder must be placed on a level surface.
• DO NOT disassemble feeder other than Bowl, Lid and Battery Cover.
• Dispose of all packaging material properly. Some items may be packed in poly bags; these bags could cause suffocation; keep away from both children and pets.
• DO NOT attempt any repairs or modifications to the feeder.
• Check with your veterinarian if you are unsure about the proper MEAL SIZE for your pet.

Keep Device

1. Device need to be placed horizontally and firmly, it’s not allowed to tipped one side and rock or upside down.
2. Keep device placed in a dry area and not expose the device under sunlight. Also not to place the feeder in a high place to avoid the damage from dropping;
3. Do not remove any parts from the feeders beside food tray and food hopper.
4. Do not place anything on top of this feeder.
5. Ensure there is no barriers near the food outlet to make the pets can be fed normally

Caution

• For indoor use ONLY
• Its NOT dishwasher safe. Hand clean only.
• For dry food use ONLY Works best with 5-15 mm food diameter or smaller.
• NOT recommended for puppies or kittens less than 7 months old or unable to reach the feeding dish.
• DO NOT use this feeder with puppies, kittens, dogs or cats with any physical disability.
• Intended for use with dogs or cats ONLY
• DO NOT allow children to play with, in or around feeder.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>