LIVARNO home 364775 LED Rope Light Instruction Manual

June 6, 2024
LIVARNO home

LIVARNO home 364775 LED Rope Light Instruction - Rope
Light

LED ROPE LIGHT
Operation and safety notes
IAN 364775_2101LIVARNO home 364775 LED Rope Light Instruction - List of
pictograms

List of pictograms used

**** Direct current / voltage **** Safety class II
Alternating current / voltage This icon indicates that the product is

mains operated.
| This icon indicates that the length of the LED rope light is approx. 11.5 m and the power cable is approx. 1.5 m
| For indoor and outdoor use| | 6 hour timer with automatic
repetition on a daily basis
| Splashproof| | CE mark indicates conformity with relevant EU directives applicable for this product.

LED rope light

Introduction

We congratulate you on the purchase of your new product. You have chosen a high quality product. The instructions for use are part of the product. They contain important information concerning safety, use and disposal. Before using the product, please familiarise yourself with all of the safety information and instructions for use. Only use the product as described and for the specified applications. If you pass the product on to anyone else, please ensure that you also pass on all the documentation with it.

Intended use

This product is suitable for indoors and outdoor use as decorative lighting. The product is only intended for use in private households, and not intended for commercial use.

Delivery scope
  •  1 x LED rope light 10 m
  • 20 x Attachment clips
  • 20 x Cable tie
  • 20 x Screw
  •  1 x Instruction manual
Description of parts
  • [1] LED rope light
  • [2] Attachment clips
  • [3] Cable tie
  • [4] Screw
  • [5] Timer button
Technical data
LED rope light 230–240 V∼ 50 Hz, (22.5 W)
Operating voltage: 240 LEDs x 3 V , 0.06 W

Note: LEDs are nonreplaceable.
LEDs:| from –15 °C to +25 °C
Ambient temperature:| ****
Protection class:| IP44 (splash-proof)
IP class:| 11.5 m (LED rope light
10 m + power cable 1.5 m)
Total length:|

LED rope light (Model No. HG04149 / HG04151)
GS certified
HG04149–warm white
HG04151–cold white

Safety information

BEFORE USING THE PRODUCT, PLEASE FAMILIARISE YOURSELF WITH ALL OF THE SAFETY INFORMATION AND INSTRUCTIONS FOR USE! WHEN PASSING THIS PRODUCT ON TO OTHERS, PLEASE ALSO INCLUDE ALL THE DOCUMENTS!

  • SILVERCREST SHLF D3 Fan Heater - DEATHDANGER OF DEATH AND ACCIDENTS FOR TODDLERS AND CHILDREN!
    Never leave children unsupervised with the packaging material. The packaging material represents a danger of suffocation. Children frequently underestimate the dangers. Please keep children away from the product at all times.

  • This product is not a toy and should not be played by children. Children are not able to understand the dangers that can occur when handling this product.

  • This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved. Children shall not play with the product. Cleaning and user maintenance shall not be made by children without supervision.

Avoid the danger of death from electric shock!

  • Before use, ensure that the mains voltage available is the same as the required operating voltage for the product (230–240 V∼).
  • Before connecting to the mains, always check the product for any damage.
  • Never use the product if you find damage of any kind.
  • The power cable cannot be repaired! If the power cable is damaged, the product must be taken out of use and disposed of in the proper way.
  • This product does not contain any parts which can be serviced by the user.
  • The LEDs cannot be replaced.
  • The LEDs are not replaceable. If the LEDs fail at the end of their lives, the entire product must be replaced.
  • Never open any of the electrical parts or insert any kind of object into them.
  • Do not open or cut the LED rope light [1].
  • Protect the product from sharp edges, mechanical loads and hot surfaces.
  • Do not install with sharp fasteners or nails.
  • Always remove the mains plug from the socket before installing, dismantling or cleaning.
  • Never touch the mains plug or the LED rope light [1] with wet hands.

CAUTION! RISK OF OVERHEATING!
The LEDs in the product have a power input of 0.06 W each. This wattage not only produces light, but also heat.

  • Do not operate the LED rope light [1] in the packaging or when it is rolled up.
  • Ensure the product is mounted to provide adequate heat-circulation.
  • Do not cover the product with blankets, cushions, or similar heat insulating materials.
  • Use the product only with the parts described in this instruction manual.
  • If the LED rope light [1] is not to be used for any length of time (e.g. holidays), disconnect it from the power supply.
  • Keep away from ponds and other water reservoirs. Install the LED rope light [1] at least 2 metres away from water containers. Avoid place that might flood after heavy rainfall.
  • If using the LED rope light [1] outdoors, make sure it is connected to a socket which is protected with a faulty voltage protection switch (FI or RCD) for a maximum faulty voltage up to 30 mA.
  • The LED rope light [1] is protected against splashes of water (IP44) as long as the socket meets the minimum protection standard.
  • Make sure the LED rope light [1] is not laid down in areas where lawn mowers, trimmers, scissors or similar cutting tools are used.
  • Do not pull the LED rope light [1] and make sure it is laid down properly so that no one walks or trips over it.
  • If in any doubt about the safe installation or use of this product, please consult a qualified electrician.
Installation safety instructions
  • Make sure that the product is only installed by competent persons.

  • The LED rope light [1] can be installed on all normally inflammable surfaces with the enclosed mounting parts.
    CAUTION! RISK OF ELECTRIC SHOCK!
    Make sure that there are no power, gas or water lines located where you wish to drill. Check with a cable and pipe locator if necessary before you begin drilling.

  • Before installation, check whether the surface is suitable for the mounting parts and the weight of the LED rope light [1] . If you are in any doubt, consult an electrical specialist for advice.

  • Do not use sharp and/or pointed objects such as wire, nails or fasteners for mounting.

  • Do not attach any additional objects to the LED rope light [1].

  • Avoid excessive bending of the LED rope light [1]. This can damage the insulation.

  • The bending radius of the rope must not fall below the following value: rope diameter between 10–14 mm: 2 cm.

  • Avoid excessive heating of the LED rope light [1].
    A maximum of two sections of rope may cross or run parallel to each other.

Installation

Note: Remove all packaging materials from the product before use. First, please unroll the product before use.
Note: The LED rope light [1] can be mounted on all surfaces officially classified as being of “normal flammability” by means of the supplied attachments.

  • Please fix the LED rope light [1] on the desired surface and fix the product by attaching it with the help of the included cable ties [3].
  • Alternatively, you can also mount the product by using the included attachment clips [2]. Firstly, place the attachment clips [2] in a sturdy sur- face and fix them with the included screws [4] by using a crosshead screwdriver.
  • Once the required attachment clips [2] have been attached, you can press LED rope light 1 into the opening of attachment clips [2] . You may further use the cable tie [3] to secure the LED rope light [1] onto the attachment clips [2] if need.

Use

  • Plug the mains plug into the socket.
  • Please note that the product will still use some energy even when the product has been switched off if the mains plug is still plugged in. To switch the product off completely, unplug the mains plug from the socket.

Timer function

The Timer button [5] has three functions:
1 x push of the button:

  • The product lights up continuously.

2 x push of the button:

  • The product lights up continuously for 6 hours and then switches itself off for 18 hours. The product will then switch on again for 6 hours at the allocated time and then switch off for 18 hours.
    Note: The Timer button [5] lights up when the timer function has been activated.

3 x push of the button:

  • The product is switched off.

Cleaning and care

CAUTION! RISK OF ELECTRIC SHOCK! First, remove the mains plug from the socket.
CAUTION! RISK OF ELECTRIC SHOCK! For reasons of electrical safety the product must never be cleaned with water or other liquids or immersed in water.

  • Do not use any solvents, petrol or similar items. This would damage the product.
  • Only a dry, lint-free cloth should be used for cleaning.

Storage

  • You may roll the LED rope light [1] up with the wheel for storing when not in use.

Disposal

The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities.

SILVERCREST SHLF D3 Fan Heater - Observe

Observe the marking of the packaging materials for waste separation, which are marked with abbreviations (a) and numbers (b) with following meaning: 1–7: plastics / 20–22: paper and fibre- board / 80–98: composite materials.
The product and packaging materials are recyclable, dispose of it separately for better waste treatment. The Triman logo is valid in France only.
Contact your local refuse disposal authority for more details of how to dispose of your worn-out product.
SILVERCREST SHLF D3 Fan Heater - FenvironmTo help protect the environment, please dispose of the product properly when it has reached the end of its useful life and not in the household waste. Information on collection points and their opening hours can be obtained from your local authority.

Warranty

The product has been manufactured to strict quality guidelines and meticulously examined before delivery. In the event of product defects you have legal rights against the retailer of this product. Your legal rights are not limited in any way by our warranty detailed below.

The warranty for this product is 3 years from the date of purchase. The warranty period begins on the date of purchase. Please keep the original sales receipt in a safe location. This document is required as your proof of purchase.

Should this product show any fault in materials or manufacture within 3 years from the date of purchase, we will repair or replace it – at our choice – free of charge to you. This warranty becomes void if the product has been damaged, or used or maintained improperly.

The warranty applies to defects in material or manufacture. This warranty does not cover product parts subject to normal wear, thus possibly considered consumables (e.g. batteries) or for damage to fragile parts, e.g. switches, rechargeable batteries or glass parts.

Warranty claim procedure

To ensure quick processing of your case, please observe the following instructions:
Please have the till receipt and the item number (e.g. IAN 123456_7890) available as proof of purchase.
You will find the item number on the rating plate, an engraving on the front page of the instructions for use (bottom left), or as a sticker on the rear or bottom of the product.
If functional or other defects occur, please contact the service department listed either by telephone or by e-mail.
You can return a defective product to us free of charge to the service address that will be provided to you. Ensure that you enclose the proof of purchase (till receipt) and
information about what the defect is and when it occurred.

Service

Service Great Britain
Tel.: 08000569216
E-Mail: owim@lidl.co.uk
IP44

LIVARNO home 100 LED Fairy - T qr

OWIM GmbH & Co. KG
Stiftsbergstraße 1
74167 Neckarsulm
GERMANY
Model-No.: HG05407B
Version: 04 / 2021
Last Information Update
Ident.-No.: HG04149 / HG04151042021-HU / SI /SK

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals