LIVARNO home 353501 LED Desk Lamp User Manual
- June 4, 2024
- LIVARNO home
Table of Contents
353501 LED Desk Lamp
User Manual
LED DESK LAMP
353501 LED Desk Lamp
IAN 354021_2010
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.
**List of pictograms used***
| Please read the operating instructions!| | Danger to life and risk of
accidents for infants and children!
****| The lamp is only intended for use as lighting in dry, indoor
locations.| | For your safety
| Alternating current / voltage| | Protection class III
V
| Volt| | Short-circuit proof safety transformer
| Hertz (frequency)| | Separate control unit
W| Watts (effective power)| | Dispose of the packaging and pro- duct in
an environmentally-friendly manner!
| Observe the warnings and safety notes!| ****| Direct current / voltage
| Warning! The danger of electric shock!|
on/off
| Switching cycles
| Safety notes| | Dimmable to 3 levels
| Instructions for use| | Energy-efficient external power supply
****| Protection class II| | TÜV SÜD / GS tested
| USB socket Contact P1 plus polarity Contact P4 minus polarity| | Tested
safety
| No protection against water!|
- Further details, e.g. additional symbol explanations and technical information, can be found at www.edi-light.com
LED desk lamp
Introduction
Congratulations on the purchase of your new product. You have chosen a high- quality product. Please be sure to carefully read all the instructions for use. Fold out the page with the diagrams. These instructions are part of the product and contain important information on setup and operation. Always observe all safety instructions. Before using this product for the first time, verify that the correct voltage is present and that all parts are properly installed. If you have any questions or are unsure about operating the product, please contact your retailer or the service center. Please keep these instructions in a safe place and include them when passing this product on to others.
Intended use
**** This lamp is only suitable for indoor use in dry and enclosed spaces.
This product is only intended for private household use.
Delivery contents
Always check that all the parts are present and that the product is in perfect
condition immediately after unpacking.
1 LED desk lamp
1 USB connection cable
1 Mains adapter
1 Set of operating instructions
Parts description
1 Lamp head
2 Lamp arm
3 Lamp base
4 Touch button
5 Colour change ring
6 RGB light
7 USB connection cable
8 Mains adapter
Technical data
Model number:
Supply voltage of
mains adapter:
Protection class:
Supply voltage
of lamp:
Output:
Protection class:
Max. height:
Base diameter:
Length of USB
connection cable:| 55458
100–240 V∼, 50 / 60 Hz
II /
5 V
5 W
III /
48 cm
13 cm
150 cm
---|---
Safety notes
Damage due to failure to comply with these operating instructions will void the warranty! We assume no liability for consequential damage! We assume no liability for property damage or personal injury due to improper handling or failure to observe the safety instructions!
DANGER OF ELECTRIC
SHOCK! A faulty electrical installation or a supply voltage that is too
high may lead to an electrical shock.
- Only connect the mains adapter if the mains voltage of the socket corresponds with the specifications on the rating plate of the mains adapter.
- Always connect the mains adapter to an easy-to-reach socket so that the lamp can quickly be disconnected from the mains in the event of a fault.
- Do not use the lamp if it is visibly damaged or if the USB connection cable or mains adapter is defective.
- If the lamp‘s USB connection cable is damaged, it must be replaced by the manufacturer or their customer service department, or a similarly qualified person, in order to avoid hazards.
- Do not open the housing; repairs must be carried out by a professional. Contact a specialist workshop for this purpose. Unauthorized repairs, incorrect connection, or improper use will void all warranty and liability claims.
- When repairing the product, only use parts that meet the original specifications. This lamp contains electrical and mechanical parts which are vital to prevent safety hazards.
- Do not use the mains adapter with an external timer switch or a separate remote control system.
- Do not connect the lamp to an external dimmer.
- Do not immerse the lamp, the USB connection cable, or the mains adapter in water or other liquids.
- Never touch the mains adapter with wet hands.
- Never pull on the USB connection cable to unplug the mains adapter from the socket. Always take hold of the mains adapter to do so.
- Never use the USB connection cable as a carrying handle.
- Keep the lamp, the mains adapter, and the USB connection cable away from open fire and hot surfaces.
- Make sure that the USB connection cable does not become a tripping hazard.
- Do not kink the USB connection cable or run it over sharp edges. Only use the lamp indoors.
- Never use the lamp in wet rooms or in rain.
- Never store the lamp where it can fall into a bath or washbasin.
- Never reach for an electrical appliance that has fallen into the water. Instead, immediately unplug the mains adapter from the socket.
- If you are not using the lamp, you are cleaning it, or if it malfunctions, always switch off the lamp and unplug the mains adapter from the mains socket.
DANGER TO LIFE AND RISK OF ACCIDENT FOR INFANTS AND CHILDREN!
This product may be used by children aged 8 and over as well as by persons with physical, sensory, or mental impairments or lacking experience and knowledge provided that they are supervised or instructed in the safe use of the product and that they understand the associated risks. Do not allow children to play with the product. Cleaning and user maintenance must not be performed by children without supervision.
- Do not allow children to play with the lamp.
- Do not allow children to play with the packaging film. Children can get entangled in the packaging whilst playing and suffocate.
- Keep children under 8 years of age away from the lamp.
- Never leave the lamp unattended whilst it is switched on.
- The light bulb in this lamp is not replaceable; if the light bulb reaches the end of its life, replace the entire lamp.
NOTE: RISK OF DAMAGE!
The lamp may be damaged if used improperly.
- Place the lamp on an easy-to-access, level, dry, heat-resistant, and sufficiently stable work surface. Do not place the lamp at the edge of the work surface.
- To prevent a heat build-up, do not place the lamp directly against a wall or under wall cabinets or similar.
- Never place the lamp on or near hot surfaces (hobs, etc.).
- Do not allow the USB connection cable to come into contact with hot parts.
- Never expose the lamp to high temperatures (radiators, etc.) or the weather (rain, etc.).
- Never immerse the lamp in water to clean, or use a steam cleaner.
- The lamp may otherwise be damaged.
- Never put the lamp in the dishwasher. This would break the lamp.
- Discontinue the use of the lamp if the plastic parts of the lamp are cracked or deformed. Always replace damaged parts with genuine spare parts.
Initial use
Checking the lamp and the delivery contents
Be careful when opening the packaging:
- Remove the lamp from the packaging.
- Check that all items included in the delivery contents are present (see diagram).
- Remove all packaging material.
- Check to see if the lamp or the individual parts are visibly damaged. Do not use the lamp if you detect any type of damage. Contact the manufacturer using the service address stated.
Operation
Setting up the lamp
- Place the lamp on a level, stable surface.
- Turn the lamp head 1 to the desired position.
- Plug the USB connection cable 7 into the mains adapter 8 and plug the mains adapter 8 into a properly installed socket, or plug the USB connection cable 7 into a device with a USB port.
Switching the lamp on /off and dimming
- Tap the touch button 4 on the lamp to switch it on or off.
- Touch the on / off switch 4 on the lamp for a bit longer to dim the light to any of the 3 settings (dimmed low, medium dimmed, not dimmed).
Switching the color change on / off
You can switch the RGB light 6 on and off separately from the lamp.
- Touch the symbol to switch the RGB light 6 on and off.
- Swipe your finger along the color change ring 5 on the lamp base 3 to choose a color.
- By pressing the symbol ****for a longer duration, you can start an automatic color change function.
Cleaning
RISK OF SHORT CIRCUIT!
Water or other liquids inside the housing may cause a short circuit.
- Do not allow water or other liquids to enter the housing.
- Never immerse the lamp in water or other liquids.
NOTE: RISK OF DAMAGE!
The lamp may be damaged if used improperly.
-
Do not use aggressive cleaning agents, brushes with metal or nylon bristles, or sharp or metal cleaning objects such as metal sponges, etc.
These can damage the surfaces. -
Never put the lamp in the dishwasher. This would break the lamp.
- Unplug the mains adapter 8 from the socket before cleaning.
- Allow the lamp to cool down completely.
- Wipe the lamp clean with a damp cloth. Then allow all parts to dry completely.
Storage
All parts must be completely dry prior to storage.
- Always store the lamp in a dry location.
- Protect the lamp from direct sunlight.
- Store the lamp out of reach of children, locked aware securely, and at a storage temperature between +5 °C and +20 °C (room temperature).
- Place the lamp in the original packaging or a box of the same size.
Disposal
The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities.
**** Observe the marking of the packaging materials for waste separation, which are marked with abbreviations (a) and numbers (b) with the following meaning: 1–7: plastics / 20–22: paper and fibreboard / 80–98: composite materials.
The product and packaging materials are recyclable and disposed of them separately for better waste treatment. The Triman logo is valid in France only.
Contact your local refuse disposal authority for more details on how to dispose of your worn-out product.
To help protect the environment, please dispose of the product properly when it has reached the end of its useful life and not in household waste. Information on collection points and their opening hours can be obtained from your local authority.
Warranty and service
Warranty
We provide a 3-year warranty from the date of purchase. Our products are
manufactured using modern production methods and are subject to precise
quality control. We guarantee that this product is in perfect condition.
During the warranty period, any defects in the material or manufacture will be
replaced free of charge. In the event of an unexpected defect, please return
the carefully packaged product to the service address specified. The warranty
does not extend to damage due to improper operation or too worn parts and
consumables. These can be ordered from the telephone number listed for a
charge. Repairs not covered by the warranty (e.g. light bulbs) may also be
requested at the cost price from the service address listed. The product will
be repaired at the specific service location. Timely processing and returns
can only be ensured by sending the product directly to this address.
If you would like additional product information, need to order accessories or
if you have a question about the service process, please contact our customer
service department on the telephone number specified. Please include the item
number (see „Technical data“) when enquiring about the product.
You can find more information bout this product at www.edi-
light.com.
Service address
Great Britain / Ireland / Northern Ireland
EGLO UK Ltd.
Unit 12 Cirrus Park
Lower Farm Road
Moulton Park Industrial Estate
Northampton, NN3 6UR, GREAT BRITAIN
T: +44 1604 790 986
E: info-greatbritain@eglo.com
Cyprus
Pierides Electrical Ltd.
AY. Athanasios Industrial Area
4. Flea Street
3507 Limassol, CYPRUS
T: +35-7258-111-33
E: pielec@spidernet.com.cy
IAN 354021_2010
Please have your receipt and item number (e.g. IAN 123456_7890) ready as your
proof of purchase when enquiring about the product.
Declaration of conformity
This product fulfils the requirements of the applicable European and national
directives. Conformity has been verified. The relevant declaration and
documents are held by the manufacturer.
Warranty card
Return address:
Name / First name:
Country / Postal code / City / Street address:
Phone:
Item number / Description:
Purchase date / Point of purchase:
Description of the defect:
Date / Signature:
Non-warranty cases:
Please return the unrepaired item, carriage paid.
Please provide pricing. Repair the product against the charge.
EDI Light GmbH
Heiligkreuz 22
6136 Pill
AUSTRIA
Last Information Update
· Stand der Informationen:
01 / 2021 · Ident.-No.: 55458012021-GB / IE / NI / CY
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>