PHILLIPS Hello App User Guide
- August 16, 2024
- Phillips
Table of Contents
PHILLIPS Hello App
Installation Instructions
- Remove old QCS socket from socket.
- Install T/T pair with NEW bolts enclosed.
- Scan QR Code below to download Free IoS or Android install App.
IOS
|
Android
---|---
Basic Warranty Policy
Phillips Industries offers a Limited Warranty to the original purchaser that the warranted products are free from defects in workmanship and/or materials only. Charges for additional incidental or consequential damage, including labor costs, cannot be accepted.
Phillips’ policy is to replace the warranted product to the original purchaser if the product fails because of a defect due to workmanship and/or materials within the limited warranty period from the original production date. Warranties are not transferable and apply only to the original owner of the Phillips product.
Product Warranty Time Limits
All products receive a warranty time period of 1 year.
Phillips USA
5231 California Avenue, Suite 220
Irvine, CA 92617
Phone: 800-423-4512
Fax: 800-597-7757
FCC Regulations
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2)this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
- Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. To comply with FCC RF Exposure compliance
requirements, this grant is applicable to only Mobile
Configurations. The antennas
used for the transmitter must be installed to provide a separation distance of
at least 20cm from all persons and must not be co‐located or operating in
conjunction with any other antenna or transmitter.
IC STATEMENT
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>