CukTech P01CT Power Bank 40000mAh User Manual
- June 17, 2024
- CUKTECH
Table of Contents
P01CT Power Bank 40000mAh
User Manual
Read this manual carefully before use, and retain it for future reference.
Product Overview
Thanks for using this product. Designed with high-quality lithium polymer
cells and charging & discharging chips, the product demonstrates outstanding
performance in safety, efficiency, and compatibility.
Product Features
Safety: Designed with multiple protection, the product can easily cope with
abnormalities such as overcharge, over discharge, overtemperature, short
circuit, and provide reliable protection for power banks and digital devices.
Power: Fast charging and discharging, supporting bidirectional Type-C wide
voltage input and output. The maximum charging power is up to 140W, and the
maximum discharge power of multiple ports is up to 300W.
Compatibility: The built-in smart USB charging controller is compatible with
mainstream mobile phones and digital devices, and supports mainstream fast
charging and discharging protocols.
Quality: High quality lithium polymer cells and charge & discharge chips.
Screen introduction
HUB icon: The icon will light up after double clicking the button to enable
the HUB function. Exit this mode after double clicking the button again or
after 2 hours of operation. The icon will turn off when the HUB function is
disabled.
Icon for wireless charging:The icon breathes during the standby state under
wireless charging, remains lit during wireless charging, and flashes when
wireless charging Is abnormal.
Fault icon: The fault icon remains ON when the device Is abnormal.
Percentage of cell capacity: The display range is 0% -100%, indicating the
current device’s cell capacity.
Power indicator ring: indicating the current percentage of power.
Input power: the “Input” icon and real-time input power are displayed when the
device is in the input state.
Output power: the “Output” icon and real-time output power are displayed when
the device is in an output state.
*Low current discharge function: Press the button twice continuously to enter low current discharge/HUB mode. In this mode the product can continuously charge small current devices such as Bluetooth earphones and bracelets, and the HUB icon will prompt user that the user is using the low current discharge/HUB mode. To exit this mode, just briefly press the button twice. The product works for 2 hours each time in the mode, and will automatically exit this mode after 2 hours.
Functions of buttons
| Screen status | Button operation | Function |
|---|---|---|
| Always on Display | Click button | Clicking the button will light up the screen |
and simultaneously open the A port/wireless charging for external power output
Bright| Clicking the button will turn off the screen
Half-bright*| Click the button to turn the screen to full brightness and open
the A port/wireless charging for external power output at the same time
Any charged state| Double click button| Double click the button to enter the
HUB /low current discharge mode, and exit the mode after another double click.
Press the button for 5 seconds| Pressing the button for 5 seconds will turn
off the A port and wireless charging for external output function, while also
turning off the screen
*In the full bright state, the screen entershalf bright state if no change occurs to the system status in a minute.
Instructions for HUB function
The USB HUB function is activated by double-clicking the button, and the “HUB”
icon on the display screen lights up when activated. Exit by double clicking
the button again, or automatically exit after 2 hours of activation.
When the peripheral is a Type-C PD powered laptop, the Type-C2 port of this
product supports power supply to the peripheral devices while the two USB-A
ports support USB expansion applications (such as a mouse and USB flash
drive).
Note: Type-C1 port does not support HUB function. Please check the
inserted port when using HUB function.
Basic parameters
Model: P01GL
Cell type: lithium-ion cell
Cell capacity (rated/typical): 141Wh/144Wh 3.6V
Rated capacity: 22,000mAh (5V/6A)
Input port: Type-C
Output port: USB-A/Type-C
Input parameter: IN1 (Type-C1) 5V 3A 9V 3A 12V 3A 15V 3A
20V 5A
IN2 (Type-C2) 5V 3A 9V 3A 12V 3A 15V 3A 20V 5A 28V
5A
Wired output: 300W MAX*
OUT1 (USB-A1) 5V 3A 9V 2.23A 12V 1.67A 10V 2.25A 22.5W MAX
OUT2 (Type-C1) 5V 3A 9V 3A 12V 3A 15V 3A 20V 5A 100W
MAX
OUT3 (Type-C2) 5V 3A 9V 3A 12V 3A 15V 3A 20V 5A 28V
5A 140W MAX
OUT4 (USB-A2) 5V 3A 9V 3A 12V 3A 15V 3A 20V 6A 120W
MAX*
Four mouths：5V 6A（OUT1 5V 1.5A OUT2 5V 1.5A OUT3 5V 1.5A
OUT4 5V 1.5A）
9V 6A（OUT1 9V 1.5A OUT2 9V 1.5A OUT3 9V 1.5A OUT4 9V
1.5A）
12V 6A（OUT1 12V 1.5A OUT2 12V 1.5A OUT3 12V 1.5A OUT4 12V
1.5A）
15V 6A（OUT2 15V 2A OUT3 15V 2A OUT4 15V 2A）
20V 15A（OUT2 20V 5A OUT3 20V 5A OUT4 20V 5A 300W MAX)
Wireless output: 20W MAX
Operating temperature: 5 ℃~35 ℃
Sensing distance: ≤ 5mm
Specification and size: 86.8×88.6×106.5mm
Conversion efficiency of power bank: 76% (5V/6A)
Charging time: About 2.5 hours (140W charger, Type-C to Type-C charging cable
inside the packaging, IN2 port)
About 10 hours (18W charger, charging cable inside the packaging)
Note: When the output current of the Type-C port is greater than 3A, a
Type-C to Type-C charging cable inside the packaging needs to be used. This
product has a large capacity, and it is recommended to use a charger with a
power of 65W or above in conjunction with the charging wire inside the
packaging. At present, the OUT4 port outputs 120W MAX and has to be used in
conjunction with the Xiaomi 120W phone and its original charging cable.
The maximum output peak power is 300W, subject to the actual testing method adopted by CUKTECH lab. The maximum output power of 300W has to be paired with a Xiaomi 120W phone, which is only sold in some countries around the world.
The USB-A2 120W only supports some Xiaomi&Redmi 120W phones and has to be used in conjunction with Xiaomi 120W phones and their original charging cables. It does not support stable output of 120W.
Some models of Xiaomi&Redmi 120W fast charging phones are as follows:
Redmi Note11T Pro+, Redmi K50 PRIME, Redmi K50 Pro, Xiaomi 13 Pro, Redmi K60
Pro, and Xiaomi 12S Pro.
This product does not support stable output of 300W.
The maximum power of a single port is 140W, which needs to be paired with
Apple’s “16 inch MacBook Pro” and the standard “C to magsafe” charging cable.
Other devices currently don’t support 140W fast charging.
The maximum output power of each port is only the maximum capacity of each
port of the product itself. The actual power of load device during charging
depends on various factors such as the current power and temperature of the
load device. The power displayed by the screen is the current stable charging
power of the device.
Warnings:
Improper use may lead to cell function failure, serious heating, and even fire
and explosion. To protect you against injury and property damage, please store
and use this product in strict accordance with the following requirements:
- This product, which is not a toy, must be kept out of the reach of children. To avoid accidents, no child is allowed to use or play with the product.
- To prevent electric shock or cell damage, please be sure to charge this product with a charger that meets local safety standards (such as China 3C certification standard).
- Do not press or strike this product heavily and avoid the cases that may cause severe fall or strong vibration. If these conditions occur, or liquid seeps/splashes into the interior of this product, stop using immediately and handle them properly because such case may cause cell or circuit damage or short circuit.
- If this product experiences swelling, deformation, fluid leakage, and significant decrease in capacity, stop using it immediately and handle it properly.
- Do not charge or discharge this product in any places that may affect its heat dissipation, such as pockets, enclosed bags, on the beds, sofas, and other places. Confirm that this product is not covered by clothing, pillows, bedding, or other debris during use. When the devices such as mobile phones are to be charged for a long time, do not stack this product together with other devices such as mobile phones, so as to ensure ideal heat dissipation for them.
- Do not disassemble, squeeze, puncture, short-circuit this product, or put it into water, fire (including near stoves, heating installations, and other heat sources), or expose this product to an environment with a temperature higher than 60 ℃ (140 ° F).
- In hot weather, keep this product away from an unmanned vehicle outdoors or other places exposed to sunlight.
- To avoid cell damage or other hazards, do not disassemble the product shell without permission because this product contains a lithium ion polymer cell.
Tips: The illustrations about the product, accessories, and user ports in the Manual are schematic diagrams for reference only. Due to product updates and upgrades, there may be slight differences between the physical product and the schematic diagram, and the physical product shall prevail.
Precautions
- Please fully charge this product before its first use.
- To charge this product or use this product to charge other devices, please choose an appropriate charger and data cable (CUKTECH charger and data cable are recommended).
- This product should be charged in an attended manner. Cut off the power supply when you are going out or leaving for a long time.
- As long as this product is fully charged or has fully charged other devices, timely unplug the connection cable to avoid loss in a long-time connection state.
- If the product has no power indication after a button is pressed, it may be in a protected state. You can connect to an external charger to recover it.
- When this product is not in use for a long time, please keep the product with power level in a range of about 25% – 50% and store it in a cool and dry place. In order to extend the cell life, do not store this product with full or no power for a long time.
Manufactured by: NanJing CukTech Electronics Technology Co., Ltd.
Address: 16F Building A1, Huizhi Technology Park, No. 8 Hengtai Road,
Nanjing Economic and Technological Development Zone, Nanjing, Jiangsu,
P.R. China
For more details, please consult the servicehotline:
+86-400-996-1219
Visit CUKTECH after-sales service website:
www.cuktech.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>