BaByliss AS6550E Air Wand Instruction Manual
- August 16, 2024
- BaByliss
Table of Contents
BaByliss AS6550E Air Wand
Specifications
- Brand: BaByliss
- Model: AS6550E
- Airflow Settings: 3 levels
- Temperature Settings: 4 levels including a cool setting
- Advanced Care Mode: Yes
- Anti-Frizz Technology: Yes
- Removable Magnetic Filter: Yes
Product Usage Instructions
Airflow / Temperature Settings:
- When turning on the Air Wand, the default settings areairflow: III & Temperature:
- To adjust the airflow, press the button until the desired speed is reached.
- The white LED will indicate each of the three airflow speeds.
- Use the cool setting on warm hair to set your style.
FAQ:
Q: How do I clean the magnetic filter?
A: To clean the magnetic filter, detach it from the dryer and remove any
accumulated debris. Rinse it under water and let it drycompletely before
reattaching.
AS6550E Read the safety instructions first.
INSTRUCTIONS FOR USE
-
Ensure hair is towel dried and combed through to remove excess water and any tangles. Divide the hair into sections ready for drying / styling.
-
Use the Air Wand without an attachment to dry the hair. To style, attach preferred brush head onto the handle. To interchange between the attachments, refer to the ‘Changing the Attachments’ section.
-
Slide the switch to the ‘on’ position and select a temperature and airflow setting suitable for your hair type.
Please note: The blue LED light will illuminate below the air outlet to indicate the anti-frizz ionic feature is activated. -
After use, slide the switch to the ‘off’ position to switch off and unplug the appliance.
-
Allow the appliance to cool before storing away.
Changing the Attachments
- With the hooks on the rear of the attachment located at the top, position the attachment over the air outlet. At a slight angle, with the bottom of the attachment touching the appliance, gently push the top of the attachment on to the handle until it clicks into place.
NOTE: Please be careful not to touch the surround of the air outlet as this will become hot after use.
Drying
- Use the Air Wand without an attachment to dry hair.
- Direct the airflow down the hair shaft to smooth the section as you dry.
- For a lasting style, select the cool setting and gently blow through warm hair to set and smooth.
- Repeat for each section of hair.
Straightening Brush
-
Place the brush head underneath or above the section of hair, close to the scalp with the firm bristles pointing upwards.
-
Using the brush over the hair section will help to detangle and straighten thinner hair. Place the brush underneath the hair section to help straighten thicker hair and add volume.
-
Use your other hand to pull the hair section taut against the brush head until the firm bristles penetrate through the hair.
-
Gently glide the brush head through the section creating tension and control through the hair to straighten the section as you dry.
For a lasting style, select the cool setting and brush through warm hair to set and smooth. -
Repeat for each section of hair.
Curved Blow Dry Brush
- Place the brush head underneath a section of hair, close to the scalp with the flexible bristles pointing upwards.
- Use the brush head to lift hair at the roots and hold for a few seconds to boost volume at the root as you dry.
- Slowly move the brush head down through each section to dry, add shape and volume.
- For a lasting style, select the cool setting and brush through warm hair to set and smooth.
- Repeat for each section of hair.v
Airflow / Temperature Settings
- There are 3 airflow and 4 temperature settings including a cool setting.
- When turning on the Air Wand the default Airflow and temperature setting will activate; airflow: III & Temperature: I.
- To set the airflow, press the button until the desired airflow speed is reached. A white LED will illuminate to indicate each of the three airflow speeds.
- To set the temperature, press the button until the desired temperature is reached. A red LED will illuminate to indicate each of the three heats. Press the button for a forth time to activate the cool setting – the 3x LED lights will change from red to blue.
- When choosing a temperature setting to dry and style your hair start with the lowest setting and increase as required. If you have delicate, fine, bleached or coloured hair, use the lower heat settings. For thicker hair, use the higher heat setting.
- Use the cool setting on warm hair to set your style.
Advanced Care Mode
To activate the Advanced Care Mode press and hold down the temperature setting
button for 1-2 seconds until the temperature LED lights alternate between red
and blue to indicate the airflow is cycling between a hot and cool airflow. To
turn off the Advanced Care Mode function, press the temperature button once to
return to your chosen heat setting.
Anti-Frizz Technology
The advanced moisture-balancing dual ionic system combines both positive and
negative ions, that work together to eliminate frizz as you dry and style.
Your hair is left feeling silky and conditioned with luxurious shine.
Removable Magnetic Filter
The removable magnetic inlet filter makes cleaning easy and therefore
optimises the dryers airflow for fast drying performance.
CARE & MAINTENANCE
To help keep your appliance in the best possible condition, follow the steps below:
- Ensure the appliance is switched off, unplugged and cool. To clean the outside of the appliance, wipe with a damp cloth. Make sure that no water enters the appliance and it is completely dry before use.
- Do not wrap the lead around the appliance, instead coil the lead loosely by the side of the appliance.
- Do not use the appliance at a stretch from the power point.
- Always unplug after use.
Cleaning the Removable Magnetic Inlet Filter
- To increase the lifespan of your product, it’s important to keep the inlet filter clean.
- Ensure the appliance is switched off, unplugged and cool.
- Using a soft brush, clean any hair and other debris from the filter.
ZI du Val de Calvigny
59141 Iwuy
France
www.babyliss.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>