Schreder 03-64-153 ECO Omnistar Kit Installation Guide
- August 19, 2024
- Schreder
Table of Contents
OMNISTAR
KIT ECO
INSTALLATION INSTRUCTIONS
PRODUCT OVERVIEW
MOUNTING OPTIONS
Mounting to vertical or horizontal surface:
4x min M10 – M12, or 2x min M12 – M14, or 4x M8 + 1x M20
ANGLE ADJUSTMENT
LIGHT ORIENTATION
ELECTRICAL CONNECTION
SAFETY INSTRUCTIONS
The light source contained in this luminaire shall only be replaced by the
manufacturer or this service agent or a similar qualified person. Always
switch off the power prior to installation, maintenance or repair activities.
RISK GROUP 2 – CAUTION! Hazardous optical radiation may be emitted from
this product. Do not stare at the luminaire when operating as it may be
harmful to the eyes. The luminaire should be positioned so that prolonged
staring at the luminaire at a distance of less than 0.2m is not expected.
This product contains a light source of an energy efficiency class G or
higher.
In case of PVC insulated mains cable, the installer MUST ensure that the WHOLE
cable is protected against climatic conditions, especially UV rays and rain,
by making sure that the cable is contained inside the luminaire and pole
Y-connection: In case of damage to the wire, it has to be replaced only
by the manufacturer, distributor or by an expert, to avoid risks.
Copyright© Schréder S.A.2024
– Executive Publisher: Stéphane Halleux – B-4000 Liége ,Rue demons 3 ( Belgium
) – The in formation, descriptions and illustrations herein are only of an
indicative nature and subject to changes without notice .
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>