V ZUG V2000 I604 Induction Hob Instruction Manual
- August 16, 2024
- V-ZUG
Table of Contents
V ZUG V2000 I604 Induction Hob
Product Information
Specifications
- Model: CookTop V2000 I604
- Type: Induction hob
- Model Designation: CTI2T-31159
Product Usage Instructions
Safety Precautions
Before using the appliance, familiarize yourself with the safety
precautions outlined in the manual to ensure safe operation.
Symbols Used
Important safety symbols are denoted in the manual. Failure to adhere to
these symbols may result in injury or damage to the appliance.
General Safety Precautions
Follow general safety guidelines provided to ensure safe usage of the
induction hob.
Appliance-Specific Safety Precautions
Specific safety precautions related to the operation of the induction hob
are detailed in the manual.
Instructions for Use
Read and understand the instructions for proper use of the appliance to
maximize its performance and longevity.
Using for the First Time
Before initial use, refer to the manual for guidance on using the induction
hob for the first time.
Frequently Asked Questions (FAQ)
- Q: What should I do if the appliance shows an error message?
A: If you encounter an error message, refer to the troubleshooting section of the manual to identify and resolve the issue. If problems persist, contact our service and support team for assistance.
Thank you for choosing to buy one of our products. Your appliance is made to
high standards and is easy to use. Nevertheless, please take the time to read
these operating instructions in order to familiarize yourself with the
appliance and get the best use out of it.
Please follow the safety precautions.
Modifications
Text, diagrams and data correspond to the technical standard of the appliance
at the time these operating instructions went to press. The right to make
technical modifications for the purpose of the further development of the
appliances is reserved.
Validity
These operating instructions apply to:
Model designation
Variations depending on the model are noted in the text.
Safety precautions
Symbols used
Denotes important safety precautions.
Failure to observe said precautions can result in injury or in damage to the
appliance or fittings!
Information and precautions that should be observed.
Information on disposal
Information about the Operating Instructions
- Indicates step-by-step instructions.
- Describes how the appliance reacts to the steps taken.
- Indicates a list.
General safety precautions
-
Read the operating instructions before using the appliance for the first time.
-
This appliance can be used by children aged 8 and above and by persons with reduced physical, sensory or mental capabilities, or lack of experience and/or knowledge, provided they are supervised or have been instructed on the safe use of the appliance and have understood the hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be undertaken by children without supervision. -
If an appliance is not equipped with a mains cable and a plug or other means for disconnecting from the mains with a contact opening on each pole complying with the conditions of overvoltage category III for full isolation, an isolating device must be in-corporated into the permanently installed electrical installation in accordance with the installation regulations.
-
If the mains cable of this appliance is damaged, it must be replaced by the manufacturer or its Customer Services or a similarly qualified person in order to avoid hazard.
1.3 Appliance-specific safety precautions
- WARNING: If the surface has a crack running through the thickness of the material, switch the appliance off and disconnect it from the mains to avoid possible electric shock.
- The appliance and its accessible parts get hot during use. Be careful not to touch the heating elements.
- Under no circumstances use a steam cleaner to clean the appliance.
- Do not place metal objects such as knives, forks, spoons, lids or aluminium foil on the hob as they can get hot.
- After use, switch the hob off using the controls and do not rely on the pan detector.
- WARNING: It can be dangerous to leave the hob unattended when cooking with fat or oil, as this can lead to fires. NEVER attempt to extinguish a fire with water. Instead, switch the appliance off and then carefully smother the flames with, for example, a lid or a fire blanket.
- Never store objects on the hob due to the risk of fire.
- The cooking process should always be supervised. Shorter cooking processes, in particular, must be supervised the entire time.
- Do not operate the appliance using an external time switch or a separate remote control system.
Instructions for use Before using for the first time
- The appliance must be installed and connected to the electricity supply in accordance with the separate installation instructions. Have a qualified fitter/electrician carry out the necessary work.
- Dispose of the packaging material in accordance with local regulations.
Correct use
- The appliance is designed for use in the home for preparing food. No liability is assumed for any damage caused by improper use or incorrect handling.
- Any repairs, modifications or manipulations to the appliance, especially any electrically live parts, may only be carried out by the manufacturer, its Customer Services or a similarly qualified person. Repairs if carried out incorrectly may cause serious injury, damage to the appliance and fittings, as well as affect the functioning of the appliance. If the appliance is not working properly or in case a repair is needed, follow the instructions given in the «Service & Support» section. If required, please contact our Customer Services.
- Use original spare parts only.
- Retain these operating instructions for future reference. If you sell the appliance or pass it on to a third party, please ensure these operating instructions accompany the appliance, together with the installation instructions. In this way, the new owners can inform themselves about how to use the appliance correctly and read the pertinent safety precautions.
- The appliance corresponds to recognized technology standards and the relevant safety regulations. Proper use of the appliance is essential to avoid damage and accidents. Please therefore follow the precautions given in these operating instructions.
- The heated surface will remain hot for some time after it is switched off and will cool down only slowly to room temperature. Please allow sufficient time for the appliance to cool down before, for instance, cleaning it.
Note on use
- Tests have shown that under normal circumstances there is no risk to cardiac pacemaker users. If, as the user of a cardiac pacemaker (or a hearing aid or another type of implant), you would like to be reassured that using the appliance does not pose a risk, you are advised to consult a competent medical authority.
- If the appliance is visibly damaged, do not use it. Contact our Customer Services.
Caution: Burns hazard
- Overheated fat and oil can easily catch fire. NEVER attempt to extinguish burning oil or fat with water. Danger of explosion! Smother the flames with a fire blanket. Keep doors and windows closed.
- The accessible surfaces of the hob can get very hot when operated with pans in place.
Caution: Risk of injury
- Keep pets away from the appliance.
- The appliance is designed for use by adults who are familiar with the content of these operating instructions. Children may not always be aware of the danger involved in using electrical appliances. Ensure proper supervision and do not allow children to play with the appliance
- there is a danger that children could hurt themselves.
Caution: Risk to life
- Packaging material, e.g. plastic film and polystyrene, can be dangerous for children and animals. Danger of suffocation! Keep packaging material away from children and animals.
How to avoid damaging the appliance
- In case of overheating, switch the hot-plate off and allow it to cool down completely. Do not put any dishes on it. Under no circumstances use cold water to cool it down quickly.
- Do not climb on to the appliance.
- Do not put hot cookware on the hob frame in order not to damage the silicone joints.
- Do not cut or prepare food on the surface and avoid impact with hard objects. Do not drag cookware across the surface.
- Take particular care that sugary foods or juices do not get onto the hot cooking zones as this can damage the surface. If sugary foods or juices do get on to the hot cooking zones clean away immediately (while still hot) with a scraper.
- Pots with pure copper or aluminium bases should not be used for cooking as they can leave behind traces that can be difficult to clean. If the traces are not removed immediately after cooking with a suitable cleaning agent, they can be permanently burned on and therefore permanently ruin the visual appearance of the appliance.
- Sliding pans and cookware across the glass ceramic causes scratches. This can be largely prevented by lifting pans and cookware up and then placing them down in position.
- The hob is designed to be used – signs of use, such as scratches or the wear and tear from pans and cookware, are normal. The more intensively it is used, the greater the signs of use; however, the appliance remains in perfect working order and therefore does not give a right of complaint. Safety is guaranteed at all times.
- There is no such thing as completely scratch-proof glass; scratches can even develop on sapphire glass, which is used in watches. The glass ceramic used is of the best quality available on the market.
Using for the first time
The appliance must be installed and connected to the electricity supply in
accordance with the separate installation instructions. Have a qualified
fitter/electrician carry out the necessary work.
All traces of adhesive must be removed before the appliance is used for the
first time.
During the first few hours of use, a cooking zone can give off an unpleasant
smell. This is normal for brand new appliances. Ensure that the room is well
ventilated.
Appliance description
Appliance overview
CookTop V2000 I604
- 2 cooking zones ø200 mm (back)
- Rated output: 2300 W
- PowerPlus output: 3000 W
- 2 cooking zones ø160 mm (front)
- Rated output: 1400 W
- PowerPlus output: 2100 W
Operating and display elements
Buttons
Appliance ON/OFF
Slider (for setting the power level)
PowerPlus
Pause cooking ON/OFF and restore function
Wipe protection ON/OFF
Select cooking zone
Operating time / Timer
Displays
- Cooking zone power level
- Operating time activated
- Cooking zone indicator light for the operating time
- Operating time / Timer
- Selection indicator: Cooking zone selected
- Power level
- Pause activated / Restore available
- Wipe protection activated
How induction hobs function
Induction hobs work very differently from conventional hobs or hot plates. The
induction coils under the glass ceramic plate produce a rapidly changing
magnetic field which directly heats up the magnetic base of the cookware.
The glass ceramic plate is only warmed by the hot cookware. Removing the
cookware from the cooking zone immediately interrupts the supply of energy.
Induction hobs are:
- quick reacting
- finely adjustable
- powerful
- energy-efficient
- safe
Cookware with a full-surface or full magnetic base is required for cooking with an induction hob.
Pan detection
Each cooking zone is equipped with pan detection. This detects suitable,
induction-compatible cookware with a magnetic base.
Cookware must be placed centrally on the relevant cooking zone.
The diameter of the base of the pan must not be greater than the diameter of
the cooking zone.
- If the cookware is removed during operation or if unsuitable cookware is used,
-
* the power level selected flashes alternately with .
-
- If no suitable cookware is placed on the cooking zone before the pan detection time (10 minutes) elapses,
- the cooking zone switches off.
- the display changes from to 0 .
- he appliance switches off after 10 seconds if no other cooking zone is in use.
Cookware
Suitable cookware
Only cookware with a magnetic base (ø 11 cm to 22 cm) is suitable for use with
the induction hob.
This can be checked in the following ways:
- A magnet sticks anywhere on the base of the cookware.
- On the hob, the power level set illuminates and does not alternate with the power level.
- Only the power level set illuminates on the hob.
Do not heat any unsuitable cookware using aids such as metal rings and the like. This can damage the hob.
General notes on cookware
- As far as possible ensure that the diameter of the base of the cookware is the same size as the upper diameter of the cookware.
- We advise against the use of cookware with a pressed base as this type of cookware does not work with all induction hobs.
- Some induction hobs have the melt, keep warm and simmer functions. We recommend using cookware without a concave base for these functions.
- Handles that are loose or hollow can produce a loud whistling noise.
- The adherence of the cookware to the hob surface is reduced during operation, and the cookware can therefore be moved more easily.
- Thick pan walls absorb the vibrations and reduce the noise level.
Energy-efficient cooking
For maximum energy efficiency and even heat distribution note the following:
- The base of the cookware must be clean, dry and smooth.
- Centre the cookware in the middle of the cooking zone.
- Use a well-fitting lid.
- Match the diameter of the cookware to the quantity of food to be cooked.
Coated cookware
- For frying, do not use a higher power level than «7».
- Coated cookware may be operated above level «7» provided that the bottom of the pan is completely covered with liquid.
- The coating may otherwise become overheated and damaged.
Never use PowerPlus with coated frying pans.
Noise during cooking
Cookware can make noise during cooking. This does not indicate any
malfunction, nor does it affect the functioning of the appliance in any way.
Noise depends on the cookware used. If the noise causes considerable
disturbance, it can help to change the cookware.
Operating the appliance
Switching the appliance on and off
- To switch the appliance on: Depress the button for 1 second.
- 0 flashes in all the power level displays.
- If no other entry is made, the appliance switches off again after about 10 seconds for safety reasons.
- To switch the appliance off: Touch the button.
Selecting a cooking zone
- Touch the 8 button for the required cooking zone.
- 0 flashes in the corresponding power level display.
- The selection indicator for this cooking zone illuminates.
- Touch or slide your finger along the slider to set the power level.
The settings for a cooking zone can only be changed if the corresponding
selection indicator is illuminated.
Once the selection indicator goes out, the cooking zone must be selected anew.
Switching a cooking zone off
- Press the 8 button of the required cooking zone.
- The selection point of this cooking zone is illuminated.
- Touch the 0 power level on the slider.
- If no other entry is made and the other cooking zones are switched off, the appliance switches off after 10 seconds.
Residual heat indicator
After a cooking zone is switched off, remains illuminated as long as there
is a risk of burns.
If the hob is switched on,
- 0 and H alternate in the display if cookware is standing on a cooking zone that has residual heat.
- H illuminates if no cookware is standing on a cooking zone with residual heat.
Overview of power levels
Power level | Cooking method | Use |
---|---|---|
1 | Melting, gentle warming | Butter, chocolate, gelatine, sauces |
2
3| Swelling| Rice
4| Continue cooking, reducing, stewing, steaming| Vegetables, potatoes,
sauces, fruit, fish
5
6| Continue cooking, braising| Pasta, soup, braised meat
7| Gentle frying| Rösti, omelettes, breaded fried foods, sausages
8| Frying, deep frying| Meat, chips
9| Flash frying| Steak
---|---|---
P| Fast heating| Boiling water
PowerPlus
All the cooking zones are equipped with the PowerPlus booster.
When PowerPlus is switched on, the cooking zone selected works at extra high
power for 7 minutes. PowerPlus can be used, for instance, to heat a large
quantity of water quickly.
Switching PowerPlus on
- Touch the 8 button for the required cooking zone.
- Touch on the slider.
- illuminates in the display.
- After 7 minutes it automatically switches back to power level 9 .
Removing the cookware interrupts PowerPlus. PowerPlus is resumed as soon as the cookware is returned to the cooking zone.
Ending PowerPlus off before time
- Press the 8 button of the required cooking zone.
- Touch the required power level on the slider.
Power management
PowerPlus cannot be used with both cooking zones of a group (A or B) at the
same time. If PowerPlus is activated with both cooking zones of a group, then
the power output is reduced for the cooking zone that was first selected.
PowerPlus with cooking zone | Group A* | PowerPlus with cooking zone | Group B* |
---|---|---|---|
1 | 2 | 3 | |
1 | P | 8 | 3 |
2 | 7 | P | 4 |
- Maximum available power level with cooking zones
If the power level is increased above these levels, PowerPlus switches off.
Automatic boost
Do not leave the hob unattended when using the automatic boost. Risk of food
boiling over, burning on and igniting!
All the cooking zones are equipped with a selectable automatic boost. With
this function, a cooking zone heats at power level «9» for a certain length of
time (see table). Then it automatically switches back to the power level set.
The automatic boost function must be activated anew each time a cooking zone
is switched on.
Switching the automatic boost on
- Press the 8 button of the required cooking zone.
- Press the required power level on the slider for 3 seconds.
- As long as the automatic boost is active, A and the power level are illuminated alternately in the display.
- After the boost time has ended, the heat output is reduced to the selected power level again.
Switching the automatic boost off before time
- Press the 8 button of the required cooking zone.
- Set a lower power level using the slider.
Operating time
Do not leave the hob unattended during use. Risk of boiling over, burning
on and igniting!
With the operating time function, a Cooking zone switches off automatically
after a set time 1 – 99 mins.
Setting the operating time
- Select the required cooking zone.
- Touch the 8 button for the required cooking zone.
- Touch or swipe the slider to set the power level.
- Touch the 88 button.
- 00 flashes in the display for 10 seconds.
- The indicator light for the cooking zone flashes.
- The symbol illuminates.
- Use the slider to set the units digit of the operating time.
- Touch the 88 button and save the units digit.
- Use the slider to set the tens digit of the operating time.
- Touch the 88 button and save the tens digit.
To quickly change the operating time, press and hold the 0 or P button.
Touch the 88 button again to set the first digit of the operating time.
- When the button is pressed for 1 second, the duration is set to 00 and an acoustic signal is emitted for as long as the button is pressed.
- The operating time starts 10 seconds after last pressing a button.
Changing the operating time
- Touch the 8 button for the required cooking zone.
- The remaining operating time for the cooking zone selected is displayed.
- Touch the 88 button.
- Use the slider to set the operating time.
- The operating time starts 10 seconds after last pressing a button.
Switching the operating time off before time
- Touch the 8 button for the required cooking zone.
- Touch the 88 button.
- Hold the 0 button depressed for 1 second.
- The operating time is set to 00.
- An acoustic signal is emitted for as long as the 0 button is pressed.
- The cooking zone continues to run.
End of the operating time
When the operating time is up
- the relevant cooking zone is selected automatically
- the corresponding cooking zone switches off
- an acoustic signal is emitted
- 00 , the symbol and the 0. power level flash.
- Touch any button to switch off the acoustic signal and the displays.
Several operating times
If operating times are set for several cooking zones,
- the shortest operating time illuminates in the display as long as no cooking zone is selected.
- the corresponding cooking zone indicator light illuminates.
- the symbol illuminates with the set operating time for each cooking zone.
To display another operating time:
- Touch the 8 button for the required cooking zone.
Timer
The timer functions like an egg timer (1 – 99 mins.).
It can only be set when a cooking zone is in operation.
A cooking zone can be put into operation when the timer is running. However,
no operating time can be set.
Setting the timer
-
Switch the appliance on.
-
Touch the 88 button.
- 00 flashes in the display for 10 seconds.
-
Use the slider to set the duration of the timer.
-
The left-hand side of the slider is used as a minus button.
-
The right-hand side of the slider is used as a plus button.
To quickly change the duration of the timer, press and hold the O or P
Touch the 88 button again to set the first digit of the timer. -
When the 0button is pressed for 1 second, the duration is set to 00 and an acoustic signal is emitted for as long as the button is pressed.
-
The timer starts 10 seconds after last pressing a button.
-
Changing the timer
- Switch the appliance on.
- Touch the 88 button.
- The time left on the timer is displayed.
- Touch the 88 button.
- Use the 0 slider to set the duration of the timer.
- The timer starts 10 seconds after last pressing a button.
Switching the timer off before time
If no cooking zone is in use:
- Switch the appliance on and then off again.
If a cooking zone is in use:
- Touch the 88 button.
- Hold the 0 button depressed for 1 second.
- The timer is set to 00.
- An acoustic signal is emitted for as long as the 0 button is pressed.
When the timer finishes
The cooking zones are not switched off, an acoustic signal is emitted and 00
flashes in the display.
Childproof lock
The childproof lock is to prevent the appliance from being accidentally
switched on.
Switching the childproof lock on
-
Switch the appliance on.
Ensure all cooking zones are switched off. -
Touch the and buttons at the same time.
- An acoustic signal is emitted.
-
Touch the button again.
- An acoustic signal is emitted.
- The childproof lock is now switched on.
- illuminates in all the power level displays for 10 seconds.
Operating the appliance with the childproof lock activated
- Switch the appliance on.
- Touch the and buttons at the same time.
- An acoustic signal is emitted.
- The childproof lock is overridden. The appliance can now be used as normal.
The childproof lock is automatically activated again after switching off the hob.
Switching the childproof lock off
-
Switch the appliance on.
Ensure all cooking zones are switched off. -
Touch the and buttons at the same time.
- An acoustic signal is emitted.
-
Touch the button again.
- A double acoustic signal is emitted.
- The childproof lock is now switched off.
- 0 flashes in all the power level displays for 10 seconds.
Restore function
If the appliance has been inadvertently switched off with the button, the
settings can be restored within 6 seconds.
- Switch the appliance on.
- The indicator light for the button flashes.
- Touch the button.
Pause cooking
With this function, the power level of all cooking zones that are switched on
can be temporarily reduced to 0 for up to 10 minutes.
After pause cooking, operation can be resumed using the previous settings.
-
Touch the button.
- The indicator light for the button illuminates.
- The power level of the cooking zone that is switched on changes to 0 .
- The operating time is paused.
- The timer continues to run.
- All buttons except , and are inactive.
If the pause cooking function is not turned off within 10 minutes, the appliance switches off completely.
-
Touch the button again to resume cooking.
- The cooking zones resume operation using the previous settings.
Wipe protection
This function prevents the power level from being changed accidentally, for
instance when wiping the control panel with a cloth.
Button tone
The button tone can be switched on or off permanently with this function. The
button tone can only be changed when no cooking zones are in use or no timer
is running.
The following tones will still be emitted when the button tone is switched off:
- Acoustic signal when the appliance is switched on
- Acoustic signal when the appliance is switched off
- End of the operating time
- When the timer is up
The setting is saved even after a power failure.
- Error tones
- Acoustic signals whenever the childproof lock is switched on, overridden or switched off.
Switching the button tone on
Switching the button tone off
Care and maintenance
Ideally, clean the appliance when it has completely cooled down. Burns
hazard!
Always clean the hob after use. This prevents food residue from burning on.
Dried-on or burned-on food residue is harder to clean off.
Use of improper cleaning techniques can result in damage to the markings or
surface.
Avoid cleaning the surface of the glass ceramic hob with abrasive cleaning
agents, scouring pads, wire wool, etc. as they can damage the surface.
- Use only a soft cloth or sponge with water and standard washing-up liquid for cleaning everyday soiling.
- Remove stubborn soiling, e.g. boiled-over milk, while still warm using a glass ceramic hob scraper. Always follow the scraper manufacturer’s instructions for use.
- Foods with a high sugar content, e.g. marmalade, that boil over should be removed while still hot using a glass ceramic hob scraper. The surface of the glass ceramic hob could otherwise become damaged.
- Remove melted plastic while still warm using a glass ceramic hob scraper. The surface of the glass ceramic hob could otherwise become damaged.
- Remove limescale stains when cool with a small amount of mild vinegar cleaner or lemon juice. Then wipe clean with a damp cloth.
- Use a suitable Cleaning agent (see page 20) to remove stubborn soiling.
Cleaning
For good results, follow these cleaning instructions.
- To clean thoroughly, remove most of the soiling using a hob scraper or a special cleaning sponge for glass ceramic hobs.
- Add a few drops of a suitable Cleaning agent (see page 20) to the cold hob surface and rub over the surface using kitchen towel or a clean cloth.
- Wipe off with a wet cloth and then polish with a dry cloth or the soft side of a suitable cleaning sponge.
Cleaning agent
Glass ceramic with standard glass
- Only use the cleaning agents and methods for glass ceramic that we recommend.
Troubleshooting
You may be able to troubleshoot the following errors yourself. If not, note down the error message in full (message and E numbers) and then call Customer Services or report it to us online.
Error messages
If a cooking zone has been running for longer without any settings being
changed, the appliance switches the cooking zone off automatically, after how
much time
depends on the power level set.
Power level | 1 | 2 | 3 | 4 | 5 |
---|---|---|---|---|---|
Safety shut-off after hrs.:mins. | 8:40 | 6:40 | 5:20 | 4:20 | 3:30 |
6 | 7 | 8 | 9 | ||
2:50 | 2:20 | 1:50 | 1:30 |
Other possible problems
Disposal
Packaging
Never allow children to play with packaging material due to the danger of
injury or suffocation. Store the packaging material in a safe location or
dispose of it in an environmentally-friendly way.
Safety
Render the appliance unusable to prevent accidents caused by improper use
(e.g. through children playing):
- Disconnect the appliance from the mains. With a fixed appliance, this is to be carried out by a qualified electrician. Then cut the mains cable off flush with the appliance.
Disposal
- The «crossed‐out wheeled bin» symbol requires the separate collection of waste electrical and electronic equipment (WEEE). Such equipment can contain hazardous, environmentally harmful materials.
- These appliances are to be handed over to a designated collection point for the recycling of electrical and electronic equipment and must not be disposed of with unsorted household waste. And in this way, you will be helping to protect resources and the environment.
- For more information, please contact the local authorities.
Addresses of the importers
AU/NZ
V-ZUG Australia Pty. Ltd.
2/796 High Street
Kew East, Victoria 3102, AUSTRALIA
LB
Kitchen Avenue SAL
Mirna El Chalouhi Highway
Wakim Bldg, Jdeiheh
Beirut
LEBANON
CN
V-ZUG (Shanghai)
Domestic Appliance Co. Ltd.
Raffles City Changning Office
Tower 3
No. 1139 Changning Road
200051 Shanghai
CHINA
RU
OOO Hometek
Dubininskaya Street 57 building 1
113054 Moscow
RUSSIA
AT/BE/
DK/DE/
ES/FR/
NO/NL/
LU/SE
V-ZUG Europe BV
Evolis 102
8530 Harelbeke
BELGIUM
SG
V-ZUG Singapore Pte. Ltd.
6 Scotts Road
Scotts Square #03-11/12/13
228209 Singapore
SINGAPORE
GB/IE
V-ZUG UK Ltd.
27 Wigmore Street
London W1U 1PN
GREAT BRITAIN
TH
V-ZUG (Thailand) Ltd.
140/36, 17th Floor ITF Tower, Silom Road
Suriyawong Sub-district
Bangrak District
Bangkok 10500
THAILAND
HK/MO
V-ZUG Hong Kong Co. Ltd.
12/F, 8 Russell Street
Causeway Bay
HONG KONG
TR
GÜRELLER
Anchor Sit.3A/1-2 Çayyolu
06690 ÇANKAYA/ANKARA
TURKEY
IT
Frigo 2000 S.p.A
Viale Fulvio Testi 125
20092 Cinisello Balsamo (Milano)
ITALY
UA
Private enterprise “Stirion” (MIRS corp.)
Osipova Street 37
65012 Odessa
UKRAINE
IL
Digital Kitchen
Hataarucha 3
6350903 Tel Aviv
ISRAEL
VN
V-ZUG VIETNAM COMPANY LTD.
21st Floor, Saigon Centre, 67 Le
Loi
Ben Nghe Ward, District 1
Ho Chi Minh City, 700000
VIETNAM
Index
A
-
Addresses of the importers ……………………… 23
Appliance -
Disposal………………………………………………… 22
-
Switching on and off …………………………….. 12
-
Appliance overview …………………………………….. 8
-
Appliance-specific safety precautions ……………………………………………………………… 4
-
Automatic boost ……………………………………….. 14
-
Cancelling before time …………………………. 14
B
- Button tone
- Switching off …………………………………………. 18
- Switching on …………………………………………. 18
C
-
Care and maintenance …………………………….. 19
-
Childproof lock …………………………………………. 16
-
Operation with childproof lock activated. 16
-
Switching off …………………………………………. 17
-
Switching on …………………………………………. 16
Cleaning agent -
Glass ceramic ………………………………………. 20
-
Coated cookware……………………………………… 11
-
Connection plate………………………………………. 27
Cookware …………………………………………………. 10
D
- Disposal……………………………………………………. 22
E
- Energy-efficient cooking …………………………… 11
H
- How induction hobs function ………………………. 9
M
- Malfunctions……………………………………………… 20
- Model designation ………………………………………. 2
N
- Noise during cooking……………………………….. 11
- Notes ………………………………………………………… 25
O
Operating and display elements
- Buttons…………………………………………………….. 8
- Display …………………………………………………….. 9
- Operating time………………………………………….. 14
- Changing………………………………………………. 15
- Finished ………………………………………………… 15
- Setting…………………………………………………… 14
- Several operating times………………………… 15
- Switching off before time ……………………… 15
P
- Pan detection………………………………………………. 9
- Pause cooking………………………………………….. 17
- PowerPlus…………………………………………………. 13
- Ending before time……………………………….. 13
- Switching on …………………………………………. 13
- Problems ………………………………………………….. 20
Q
- Quick instructions …………………………………….. 28
R
- Residual heat indicator…………………………….. 12
- Restore function……………………………………….. 17
S
Safety precautions
- General ……………………………………………………. 4
- Safety shut-off …………………………………………… 21
- Serial number (SN)…………………………………… 27
- Service & Support…………………………………….. 27
- Symbols ………………………………………………………. 4
T
- Technical questions………………………………….. 27
- Timer ………………………………………………………… 15
- Changing………………………………………………. 16
- Setting…………………………………………………… 15
- Switching off before time ……………………… 16
- Type…………………………………………………………….. 2
U
- Using for the first time ………………………………… 8
V
- Validity…………………………………………………………. 2
W
- Warranty extensions …………………………………. 27
- Wipe protection ………………………………………… 17
Service & Support
The «Troubleshooting» section gives you valuable tips on how to deal with
minor malfunctions yourself, saving you the time and trouble of calling out a
service
technician and any cost that goes along with it.
Information on the V-ZUG warranty can be found at
www.vzug.com →Service
→ Warranty information. Please read this information carefully.
Please register your appliance straightaway online at
www.vzug.com →Service
→ Warranty registration. This will allow you to take advantage of the best
possible support in the event of a fault in the appliance during the guarantee
period. You will require the serial number (SN) and appliance designation to
register your appliance. You will find them on the identification plate of
your appliance.
My appliance information:
SN: __ Appliance: ____
Please have this appliance information to hand when contacting V-ZUG. Thank
you. The identification plate and the connection plate are located on the
underside of the hob.
- Identification plate with serial number (SN)
- Connection plate
A second identification plate is supplied and should be affixed in the fitted unit underneath the hob.
Your repair order
At www.vzug.com →Service→Service number you will find
the telephone number of your nearest V‑ZUG service centre.
Technical questions, accessories, warranty extensions
V-ZUG is happy to help you with any general administrative or technical
queries, to take your orders for accessories and spare parts and to inform you
about our progressive service agreements.
Quick instructions
Please first read the safety precautions in the operating instructions!
To switch appliance on
- Hold the button depressed for 1 second.
To select cooking zone
- Touch the 8 button for the required cooking zone.
- The selection indicator for this cooking zone illuminates.
- Touch or swipe the slider to set the power level.
To switch cooking zone off
- Touch the 8 button for the required cooking zone.
- Touch on the slider.
To switch appliance off
- Touch the **** button.
V-ZUG Ltd, Industriestrasse 66, CH-6302 Zug info@vzug.com, www.vzug.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>