Immax 08930L Led Table Lamp Kingfisher Instruction Manual
- August 16, 2024
- immax
Table of Contents
Immax 08930L Led Table Lamp Kingfisher
Technical specifications
- Color temperature: 3000K#300K 5500K#500K 4200K#400K
- CRI: > 80Ra
- Input voltage: DC12V/1A
- Material: ABS+ RUBBER
- Luminos flux: >450LM
- Power: 9W
Battery replacement
Lighting brightness adjustment
User manual
-
Insert the power connector into the power connector on the base of the lamp.
-
USB connector: DC5V / 1A – this connector is intended only for mobile devices or accessories with a consumption lower than 5V / 1A.
-
In this direction you can tilt the lamp within 90°
- hold the base of the lamp
-
You can adjust the position of the lamp head by 180 °
- Exceeding this range may damage the lamp arm
-
You can control the lamp with these buttons
Calendar and alarm settings
Time and date settings
- in normal mode, press the “set” button to access the setting mode, by pressing the “set” button again you can select from the following setting options: hours – minutes – year – month – day
- press “up” or “down” to set the desired time, etc.
- in setting mode, press the “mode” button or cancel the setting for a minute. The required setting is saved
- in normal mode, press the “up” button to toggle between 12H and 24H time format
Snooze settings
- in normal mode, press the “mode” button to activate the alarm function
- in alarm mode, press the “set” button to activate the alarm settings: hours – minutes – Snooze – music – exit
- Press the “up” or “down” button to set the required information
- in alarm mode, press the “up” or “down” button to turn the alarm and Snooze function on or off, press the button again to toggle between: alarm on – snooze on – alarm off – snooze off
- The alarm will ring for one minute at the set time, then the snooze function will activate and the alarm will ring again. To turn off the alarm, press any key.
Thermometer settings
in normal mode, press the “down” button to toggle between degrees Fahrenheit
(F) or degrees Celsius (C).
Notice:
- Do not disassemble the lamp, as this may cause injury electric current
- Use only the original AC adapter
- Do not use the lamp in high temperatures or humidity
- Do not look directly into the light source, as this may damage your eyesight
- do not use the lamp if:
- the source cable is damaged
- if the lamp is mechanically damaged or wet
- if the lamp sparkles or smokes
- the lamp flashes
Environmental protection tips:
The symbol on the product or in the accompanying documentation means that used
electrical and electronic products must not be disposed of with your other
household waste. In order to dispose of the product properly, please return it
to the designated collection points, where it will be accepted free of charge.
By ensuring this product is disposed of correctly, you will help prevent
potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product.
Contact your local authority or the nearest collection point for further
details. Penalties may be applicable for incorrect disposal of this waste in
accordance with national regulations.
Maintenance :
- Protect the device from contamination and contamination. Wipe the device with a soft cloth, do not use rough or coarse-grained material.
- DO NOT use solvents or other aggressive cleaners or chemicals.
A Declaration of Conformity has been issued for this product. More information
can be found at www.immax.cz
Manufacturer and importer
IMMAX, Pohorí 703, 742 85 Vresina, EU
www.immax.cz
Vyrobeno v P.R.C. / Hergestellt in P.R.C.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>