Caseta Wireless In Wall Dimmer User Guide

Caseta Wireless In Wall Dimmer

In-wall dimmer

Welcome—and thank you for purchasing a Caséta Wireless in-wall dimmer. In order to control your lights from an app or remote, you’ll need to replace an existing switch with a Caséta Wireless in-wall dimmer.
Before you install the dimmer, please watch the installation video at www.casetawireless.com/support
We hope you enjoy the convenience of Caséta Wireless!

Double your warranty

Love Caséta Wireless dimmers? Have ideas for making them better? Tell us what you think and we’ll extend your warranty by 1 year. www.casetawireless.com/register

Contents supplied

In-wall dimmer

Tools you’ll need

Turn power off at circuit breaker!

WARNING: SHOCK HAZARD
May result in serious injury or death. Turn off power at circuit breaker or fuse before installing.

Important note:
Some lights have one wall switch, while others have two or more wall switches (such as stair lights, which have a switch at both the top and bottom of the stairs). We’ve included instructions for lights with one wall switch (called a single pole). If your light has more than one switch (called a 3-way), please visit www.casetawireless.com/3way for complete installation instructions and how-to videos.

Remove existing switch from wall

• Remove the wallplate from switch.
• Remove the switch and pull it away from the wall.
• Remove the switch and pull it away from the wall.
• • If your switch has more than 3 wires attached, see “Installing Caséta Wireless in a 3-way switch application” video at www.casetawireless.com/3way

Remove side sections (if necessary)

Do not remove outside side sections on dimmers at the end of gang.

Each dimmer has inside side sections removed. Dimmer at middle has all side sections removed.

Important note:
Removing side sections reduces the dimmer’s maximum wattage rating. See the chart below for maximum wattage information.
Maximum* wattage derating chart (120 V~ 50/60 Hz)

Side sections removed None 1 side 2 sides
LED & CFL 150 W 150 W 150 W
or*
Incandescent & Halogen  600 W 500 W 400 W

• For maximum wattage information when mixing light bulb types see www.casetawireless.com/ganging

Connect the dimmer

1. Connect the bare copper (or green) “ground” wire from the wallbox to the green wire on the dimmer using a wire connector.
2. Connect either of the remaining wires from the wallbox to either of the remaining wires on the dimmer using a second wire connector.
3. Connect the remaining wire from the wall to the remaining wire on the dimmer using a third wire connector.

Mount the dimmer

CAUTION

Use only with permanently installed fixtures with dimmable LED, dimmable CFL, halogen, or incandescent,lamps. To avoid overheating and possible damage to other equipment, do not use to control receptacles, motor-driven appliances, or transformer-supplied appliances.

Codes

Install in accordance with all national and local electrical codes.

Grounding

When no “grounding means” exist in wallbox, the National Electrical Code (NEC®) allows a control to be installed as a replacement if 1) a nonmetallic, noncombustible faceplate is used with nonmetallic attachment screws or 2) the circuit is protected by a ground fault circuit interrupter (GFCI). When installing a control according to these methods, cap or remove green wire before screwing control into wallbox.

FCC/IC Information

This device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation. Modifications not expressly approved by Lutron Electronics Co., Inc. could void the user’s authority to operate this equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Works with energy efficient dimmable light bulbs:

• LED—up to 150 W
• CFL—up to 150 W
• Halogen—up to 600 W
• Incandescent—up to 600 W

NOTE : You can mix and match dimmable LED and CFLs, as well as halogen and incandescent light bulbs, with Caséta Wireless dimmers.
Dimmable LED and CFL light bulbs vary in their dimming performance. If you’re using these
bulbs and they flicker or turn off, please visit www.casetawireless.com/lowend for information on adjusting the dimmer for best bulb performance.
For a complete list of compatible dimmable LEDs and CFLs, please visit www.casetawireless.com/bulblist
Compatible light bulbs include:
Cree®
BA19-08027OMF-12DE26-1U100
CR6-575L
EcoSmart®
ECS BR30 W27 FL 120
ECS 20 WW FL 50WE 120
Feit®
A19/OM/LED
Philips®
9290002295
Sylvania®
LED12A19/DIM/O/827
LED21PAR38/DIM/P/930/FL30
Lutron Electronics Co., Inc.
7200 Suter Road
Coopersburg, PA 18036-1299, U.S.A.

With a smartphone or tablet (Bridge required, sold separately)
The CasétaT Wireless dimmer can be controlled from a smartphone
when used with the Lutron Smart Bridge.
If you are using the dimmer and remote control with the Lutron
Smart Bridge follow the instructions below.

Download the Lutron app

Launch the Lutron app

UPsree stsh ea Lnudt hroonld a “popf ft”o bcuotmtopnle oten AreLmLot

eremaining steps

Without a smartphone or tablet (Bridge not required)

Pairing the dimmer and Pico remote control

Press and hold “off” button on dimmer

Press and hold “off” button on remote

Changing the favorite light level on the Pico remote control (sold separately) You can use the round “favorite” button on the Pico remote control to recall a favorite light level. We’ve set it to 50%, but you can change it to any level you like.

Set desired light level on dimmer P ress and hold “favorite” button on remote

Using your controls

Replacing light bulbs using FASS
Pull the FASS switch out on the in-wall dimmer to remove power at the light socket

Important notes:

1. For indoor use only.
2. Operate between 32 ˚F (0 ˚C) and 104 ˚F (40 ˚C).

Device Ratings
In-wall dimmer
DS-6WCL
120 V~ 50/60 Hz

Warranty
For warranty information, please visit www.casetawireless.com/warranty

Troubleshooting

bulb(s) burned out.

• Breaker is OFF or tripped.

• Light not properly installed.

• Wiring error.

• FASS switch on the dimmer is in the Off position.

Light does not respond to Pico remote control.| • The dimmer failed to pair with Pico remote control; see Pairing the dimmer and Pico remote control.

• The dimmer is already at the light level the Pico remote control is sending.

• The Pico remote control is outside the 30 ft (9 m) operating range.

• The Pico remote control battery is low.

• The Pico remote control battery is installed incorrectly.

• Bulbs turn off while being dimmed.

• Bulbs turn on at high light level but do not turn on at a low light level.

• Bulbs flicker or flash when dimmed to a low light level.

| Verify bulbs are marked dimmable and visit www.casetawireless.com/ lowend for information on adjusting the dimmer for best bulb performance.

Go to www.casetawirless.com/support for additional troubleshooting suggestions

References

• Caseta by Lutron | Smart Light Switches, Controls & Dimmers
• Installing Caséta for a light with two switches | Lutron
• Lutron Support Center | Lutron
• Application Notes | Caséta Wireless | Lutron
• Capacity Derating Charts
• casetawireless.com/register
• Application Notes | Caséta Wireless | Lutron
• casetawireless.com/warranty
• casetawirless.com - This website is for sale! - casetawirless Resources and Information.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>