RUUD RUTG70DVLN-3 Tankless Water Heaters Owner’s Manual
- August 14, 2024
- RUUD
Table of Contents
- RUUD RUTG70DVLN-3 Tankless Water Heaters
- Easy Installation
- Ready for Retrofits
- Key Features
- U.S. Ground Water Temperature Zone Map
- Flow Rate Capacity Table by Zone (Gallons Per Minute – GPM)
- Venting
- INDOOR DIRECT VENT
- OUTDOOR
- Parts & Accessories
- Specifications:
- Product Usage Instructions:
- FAQ:
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
RUUD RUTG70DVLN-3 Tankless Water Heaters
OWNER’S MANUAL
Ruud® RUTG Series High Efficiency
Non-Condensing Tankless Gas Water Heaters
RUTG Series Models
Indoor & Outdoor Models 11,000-199,900 BTU/h Natural Gas and Liquid Propane
Models
Swap P for N in model number for Liquid Propane model
Easy Installation
- Industry Leading! 43′ vent run capability
- Enhanced design up to 10% smaller to fit in even more places than before
- Enhanced design up to 22% lighter making one-person installs even easier
Ready for Retrofits
- Industry Best! 1/2″ side to side clearance allows you to safely work in spaces the competition can’t
- 1/2″ Gas line compatibility up to 24 ft (subject to local code)
- Universal Venting Compatibility with UBBINK, Metal Fab, and Rainbow venting for easier tankless to tankless replacements
Key Features
- Ruud® Exclusive! Hot-start Programming™ ensures the unit is in a ready state between back-to-back usage, minimizing any cold water bursts
- Built-in EcoNet® Wi-Fi technology for direct control from your device (on select models)
- LeakGuard® – All-inclusive leak detection and prevention system that detects any leak that comes from the unit (on indoor Wi-Fi models)
U.S. Ground Water Temperature Zone Map
Flow Rate Capacity Table by Zone (Gallons Per Minute – GPM)
Use the U.S. Ground Water Temperature Map to locate your zone. Then use the Flow Rate Capacity Table to determine model flow rate by zone. Flow rates calculated for tankless set temperature of 120°F with a mixed shower temperature of 105°F. Ground water temperatures vary seasonally.
Venting
Venting Materials Allowed: 3-in./5-in.
(7.6-cm/12.7-cm) UL-approved
Category III Stainless Steel vent materials or water heater manufacturer- approved vent material (MetalFab, UBBINK, and Rainbow)
INDOOR DIRECT VENT
OUTDOOR
Hanging bracket is included with water heater.
Parts & Accessories
In keeping with its policy of continuous progress and product improvement, Ruud reserves the right to make changes without notice.
Ruud Water Heating
1115 Northmeadow Parkway, Suite 100, Roswell, Georgia 30076
Specifications:
Product Usage Instructions:
Installation:
The Ruud Residential Gas RUTG Series Tankless Water Heaters are designed for easy installation and are suitable for retrofits.
Gas Connection:
The gas connection is a 3/4 NPT for both Natural Gas and Propane models.
Hot Water and Cold Water Connection:
The hot water and cold water connections are both 3/4 NPT fittings.
Venting Requirements:
Venting materials allowed are 3-in./5-in. UL-approved Category III Stainless Steel vent materials or manufacturer-approved vent materials like MetalFab, UBBINK, and Rainbow.
FAQ:
What is the warranty coverage for the Ruud Residential Gas RUTG Series
Tankless Water Heaters?
The warranty includes a 15-year heat exchanger warranty, a 5-year parts warranty, and a 1-year labor warranty.
What is the maximum altitude at which the water heater can operate?
The Ruud Tankless Water Heaters can operate at altitudes of up to 7,800 ft.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>