Joie i-Trillo High Back Booster Instruction Manual

Joie i-Trillo High Back Bo

Specifications

• Model: i-TrilloTM high back booster
• Regulation: ECE R129/03
• Child height requirement: 100cm-150cm
• Age reference : 3.5-12 years
• Orientation: Forward-facing only

Product Usage Instructions

Installation

1. Ensure all parts listed in the manual are available.
2. No tools are required for assembly.
3. Keep the instruction manual in the storage compartment at the bottom of the booster.
4. Check that the booster fits securely in your vehicle and that the straps are tight and not twisted.

Warnings and Safety Instructions

• Follow all installation instructions carefully to ensure optimum safety.
• Avoid trapping rigid items or plastic parts of the booster in movable seats or vehicle doors.
• Replace the booster if it has been involved in an accident or subjected to heavy loads.
• Do not alter the booster seat without approval; do not remove white EPP/EPS foams.
• Avoid using the seat if surfaces are too hot from sunlight.
• Never leave a child unattended in the booster seat or vehicle.
• Secure any luggage or objects that could cause injury in case of a collision.
• Always use the booster with soft goods recommended by the manufacturer.

Welcome to Joie™

• Congratulations on becoming part of the Joie family! We are so excited to be part of your journey with your little one. While traveling with the i-Trillo™ series high back booster you are using a high quality, fully certified safety-enhanced child restraint. Please carefully read this manual and follow each step to ensure a comfortable ride and the best protection for your child.
• To use this Joie booster according to ECE R129/03, your child must meet the following requirements.
• Child height 100cm-150cm (Reference age 3.5-12 years).

Booster
Please read all the instructions in this manual before installing and using the product.

IMPORTANT: KEEP FOR FUTURE REFERENCE. PLEASE READ CAREFULLY.

• Please keep the instruction manual in the storage compartment at the bottom of the booster as right figure.
• For warranty information, please visit our website at joiebaby.com

Parts List

Make sure all parts are available before assembly. If any part is missing, please contactthe  local retailer. No tools are required for assembly

1. Head Support
2. Lower Back Support
3. Armrest
4. Base
5. Cupholders
6. Head Support Adjustment Lever
7. Shoulder Belt Guide
8. Side Impact Shield

WARNING

• NO booster can guarantee full protection from injury in an accident. However proper use of this booster will reduce the risk of serious injury or death to your child.

• Always take care to follow the installation instructions correctly, this will ensure the booster performs at an optimum safety level.

• Do take care so that the rigid items and plastic parts of a booster shall be so located and installed that they are not liable to become trapped by a moveable seat or in a door of the vehicle.

• To use this booster seat according to the ECE R129/03, your child must meet the following requirements.
  Child height 100cm-150cm (reference age: 3.5-12 years). Forward facing only (in vehicle travel direction)

• The booster may not fit to all vehicles for the usage from 135cm-150cm.

• Any straps holding the booster to the vehicle should be tight and the straps should not be twisted.

• The booster seat should be replaced if it has been subjected to heavy loads in the event of an accident or if it has been dropped.

• This booster seat is only intended to be used in the car.

• Do not make any alterations or additions to the booster seat without approval from the type approval authority. DO NOT remove any of the white EPP/EPS foams. Failure to do so may result in serious safety issues.

• DO NOT use the seat if the surfaces are too hot from sunlight.

• Never leave the child unattended in the booster seat or vehicle, not even for a few minutes.

• Any luggage or other objects liable to cause injuries in the event of a collision shall be properly secured.

• The booster shall not be used without the soft goods.

• The booster soft goods should not be replaced with any other than the one recommended by the manufacturer, because the soft goods constitute an integral part of the restraint performance.

• Always secure the child with a booster, even on short trips, as this is when most accidents occur.

• DO NOT leave this booster, or other items unbelted or unsecured in your vehicle. Remove the booster seat from the car if not regularly used and store it in a dry, sun-protected surrounding.

• It’s recommended not to use a second-hand boost-er seat whose history is not known. It may have invisible structural damages or defects due to incorrect usage/storage.
  DO NOT use any load-bearing contact points other than those described in the instructions and marked on the booster.

• DO NOT install this booster under the following conditions:

  • Vehicle seats facing sideways or rearward concerning the vehicle’s direction of travel.
  • Vehicle seats are movable during installation.

• Consult the retailer for issues concerning maintenance repair and part replacement.

• To avoid burns, never put hot liquids in your boosters cupholders.

Emergency
In case of an emergency or accident, it is most important to have your child taken care of with first aid and medical treatment immediately.

Product Information

1. This is an Enhanced Child Restraint System, intended to be used as a Non-integral Universal Enhanced Child Restraint System (i-Size booster seat) from 100-150cm.
2. It is approved by the latest UN Regulation R129/03.
   • Product Booster seat
   • Materials Plastics, Metal, Fabrics
   • Patent No. Patents pending
   • Suitable for Child height 100cm-150cm (Reference age 3.5-12 years).
   • Installation Forward facing (in vehicle travel direction

Booster Assembly

1. Squeeze the head support adjustment lever first and then slide in lower back support under the fabric cover to connect them. 1
   • CHECK to make sure two pieces are securely snapped together by pulling on them.
2. To attach the lower back support to the base, hook the lower back support over the seat bar hinge on the base. 2
3. Rotate the lower back support up while holding the booster seat until it clicks into an upright position. 3
4. Align the side impact shield with the slot of lower back support plastic mounts, and then insert to lock. 4 5
   • Please choose whether to install the side impact shield according to the size of the car.
5. Remove side impact protection. Please refer to 6 7

Height Adjustment

for Head Support
Squeeze the head support adjustment lever while pulling up or down on the head support until it snaps into one of the 10 positions. 8

Concerns on Installation

Installation with 3-point-belt

Pull the vehicle safety belt pass through the belt path 14, and then buckle it up. 14 -3

• Position the shoulder belt through the shoulder belt guide shown in 14 -1

• DO NOT position the vehicle belt over the top of the armrests. It must pass underneath the armrests. 14 -2

• The booster can not be used if the vehicle safety belt buckle (female buckle end) is too long to anchor the booster securely. 14 -4

• After your child is placed in this booster, the safety belt must be used correctly, and ensure that any lap strap is worn low down so that the pelvis is firmly engaged. 14

• To ensure the correct head support height is obtained, the bottom of the headrest MUST be even with the top of the child’s shoulders as shown in 15 and the shoulder belt must be positioned in the green zone as shown in 16

• Place a booster firmly against the back of a forward-facing vehicle seat equipped with a lap/shoulder belt.

• Make sure, that the shoulder belt portion of the vehicle belt goes straight through the shoulder belt guide as shown in 17

• Tighten the vehicle belt by pulling the shoulder strap until all belt slack is removed.

• If the belt lays acrthe oss child’s neck, head, or face, readjust the head support height.

• Any straps holding the booster to the vehicle should be tight and the straps should not be twisted.

Use Cupholders

Detach Soft Goods

Open 2 pairs of buttons and 6 pairs of elastics on the back of soft goods to remove it. 20 To refit the seat pad simply reverse the steps above.

Care and Maintenance

• Please wash the soft goods and inner padding with cold water under 30°C.
• Do not iron the soft goods.
• Do not bleach or dry clean the soft goods.
• Do not use undiluted neutral detergent gasoline or other organic solvent to wash the booster. It may cause damage to the booster.
• Do not twist the soft goods and inner padding to dry with great force. It may leave the soft goods and inner padding with wrinkles.
• Please hang dry the soft goods and inner padding in the shade.
• Please remove the booster from the vehicle seat if not in use for a long period. Put the booster in a cool, dry place and somewhere your child cannot access it.

Allison Baby UK Ltd,

• Venture Point, Towers Business Park
• Rugeley, Staffordshire, WS15 1UZ NUNA International B.V.
• Van der Valk Boumanweg 178 C, 2352 JD Leiderdorp, The Netherlands

Share the joy at joiebaby.com

FAQ

• Q: What age range is suitable for using the i-TrilloTM high back booster?
  • A: The booster is suitable for children aged 3.5 to 12 years with a height of 100cm to 150cm.
• Q: Can the booster be used in all vehicles?
  • A: The booster may not fit in all vehicles for children with a height between 135cm and 150cm. Ensure it fits securely in your vehicle before use.
• Q: Can I replace the soft goods of the booster with other materials?
  • A: No, it is essential to use only the soft goods recommended by the manufacturer as they are integral to the restraint’s performance.

References

• Baby Gear That Goes Above & Beyond | Joie

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>