OPPLE L12 Series Surface Panel Performer Instruction Manual
- August 14, 2024
- OPPLE
Table of Contents
OPPLE L12 Series Surface Panel Performer
Specifications
- Product Name: Surface Panel Performer
- Model Variants:
- LEDPanelS-Sf-P L12-40W-830/840
- LEDPanelS-Sf-P L12-40W-DALI-830/840
- LEDPanelS-Sf-P L12-40W-BLE2-830/840
- LEDPanelS-Sf-P L15-50W-830/840
- LEDPanelS-Sf-P L15-50W-DALI-830/840
- LEDPanelS-Sf-P L15-50W-BLE2-830/840
- LEDPanelS-P Suspension-Kit-G6
- Weight: 4.1kg – 4.8kg
- Color Temperature: 3000K/4000K
Product Usage Instructions
Ceiling Mounting:
Ensure the surface panel is mounted securely on the ceiling with
appropriate mounting hardware. The recommended distance from the ceiling
should be greater than 5mm.
Product Codes and Descriptions:
Refer to the product codes for specific variants of the Surface Panel
Performer. Each variant is designed for different wattages and
functionalities.
Light Source and Energy Label:
The product includes a QR code for easy identification and an energy label
for energy efficiency compliance.
Suspension Kit:
If using the Suspension Kit-G6, follow the provided instructions for proper
installation and suspension of the panel.
Weight
Dimension
Light source
Ceiling Mounting
Suspension (Suspension kit to be purchased separately)
For On-off/ BLE
- Bluetooth Operating Frequency: 2402-2480MHz
- Bluetooth Max Transmission Power: <20dBm
For Dali
Remark : Only use the open push button without the indicator light. Maximum cable length between each Unit:20 meters.
Caution
- Terminal block not included. Installation may require advice from a qualified person.
- Only use suitable connection boxes with internal terminal blocks that conform to EN60998-2-1 or EN60998-2-2. The terminal should be capable of at least 450V 16A, 0.75mm2 wiring.
- The luminaire is only suitable for safety extra low voltage supply (<50Va.c.; < 120Vd.c.).
- The controller for the connection panel should be SELV.
- It must be a basic insulation between FELV and SELV, as is FELV and LV supply for 1-10V and DALI type.
For non-user replaceable light sources :
- The light source contained in this luminaire shall only be replaced by the manufacturer his service agent or a similar qualified person.
- Caution: Any operation on the LED module is forbidden while power-on.
- In case of damage to the wire, it has to be replaced only by the manufacturer, distributor, or by an expert, to avoid risks.
Data subject to change
MORE INFORMATION
OPPLE Lighting Co., Ltd.
Room 411, Building 1 No. 6111,
Longdong Avenue, Pudong New District, Shanghai City 201201, P. R. China
Opple Lighting B.V.
- Meerenakkerweg 1-07
- 5652 AR Eindhoven
- The Netherlands
- service@opple.com
- www.opple.com
FAQ
- Q: What is the Bluetooth operating frequency for BLE functionality?
- A: The Bluetooth operating frequency is 2402-2480MHz with a maximum transmission power of 24.
- Q: Do all variants support Bluetooth Low Energy (BLE) technology?
- A: No, only specific variants like LEDPanelS-Sf-P L12-40W-BLE2 and LEDPanelS-Sf-P L15-50W-BLE2 support BLE technology.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>