COSMIRROR RM411 Fogless Shaving Mirror User Manual

June 1, 2024
COSMIRROR

COSMIRROR RM411 Fogless Shaving Mirror

COSMIRROR-RM411-Fogless-Shaving-Mirror-PRODUCT

For your safety and continued enjoyment of this product, please always read the instructions carefully before using it.

Safety Instructions

  • Use the mirror only for its intended use as described within the manual.
  • Do not use attachments not recommended by the manufacturer.
  • Do not operate this appliance if the appliance malfunctions or has been damaged in any manner. No repairs should be attempted by the consumer.
  • Clean the surface of the mirror with water or glass cleaner and then dry it with a soft cloth. Do not use corrosive chemicals to clean the mirror surface.
  • Be sure the mirror is not in a position where it can reflect sunlight. Reflected sunlight may cause a fire.
  • Please provide close supervision when the mirror is being used near children or disabled persons.
  • DO NOT expose the product to fire as this may result in explosions and other hazards.

Storage Instructions

  1. Be sure direct sunlight does not strike the mirror when left unattended.
  2. Place the mirror in a cool and dry area.
  3. For safety, please make sure the mirror is out of reach of children.

Specifications

  • [Product Name] Fogless Shaving Mirror
  • [Main materials ] ABS+PC
    [Product Size] As shown in the figure

Illustrate

COSMIRROR-RM411-Fogless-Shaving-Mirror-FIG-2

Package List

COSMIRROR-RM411-Fogless-Shaving-Mirror-FIG-3

Installation

  1. Wipe the wall to keep it dry and clean.
  2. Tear off the protective film of adhesive and stick the adhesive hook on the wall.
  3. Press firmly for 30 seconds to exhaust the air.
    • (Note: It is better to wait 24 hours for stronger adhesion.)
  4. Align the holes of the bracket with the adhensive hook.
  5. Tighten the screw to fix the bracket.
  6. Adjust the angle as needed (360° available).

Important (Get the best bond with adhesive)

  • Make sure the surface of the adhesive is dry and clean before mounting it necessary preparation to achieve better substances), and finish
  • It’s highly recommended to heat it with a hair dryer while you mount it in the cold area.
  • This product is recommended to be used on tiles, glass, wooden boards, and other smooth and dust-free walls.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals